Frequently asked questions
How are chemical engineers recruited at BARC?
OCES/DGFS trainees are selected by an online exam and/or GATE score followed by a demanding technical interview. Always confirm in the current official notification.
What should I prepare for a BARC chemical engineering interview?
BARC (Bhabha Atomic Research Centre) works in nuclear research (dae): Reprocessing, heavy-water and isotope processes, waste management, process development. Likely focus areas: Distillation & separations, Thermodynamics & energy, Heat exchangers, furnaces & steam, Nuclear & heavy water, Reactors & catalysts.
Bhabha Atomic Research Centre: official website
Questions to prepare (88)
- What is reflux and why is it needed in a distillation column?
- What is flooding in a distillation column? What are its signs and causes?
- How do you choose between a tray column and a packed column?
- What is the difference between adsorption and absorption? Explain PSA.
- What is liquid–liquid extraction and where is it used?
- What is the McCabe–Thiele method and what are its assumptions?
- How does a membrane separate gases or salts? Give plant uses.
- What is the triple point and the critical point?
- What is fugacity and why do we need it?
- State the phase rule. How many degrees of freedom does boiling water have?
- What is entropy? Give a practical meaning.
- Which fluid goes on the tube side of a shell-and-tube exchanger, and why?
- What is the critical radius of insulation?
- What do Nusselt, Prandtl and Biot numbers tell you?
- Why are evaporators operated as multiple effects?
- Why does India’s PHWR use heavy water? Why can it use natural uranium?
- How is heavy water produced? Explain the bithermal exchange principle.
- Describe India’s three-stage nuclear power programme.
- What is the PUREX process?
- Why must a reactor be cooled even after shutdown?
- What are the units of radiation dose? What is ALARA?
- What is the role of moderator, coolant and control rods in a reactor?
- Why is zirconium alloy used for fuel cladding and pressure tubes?
- How is high-level radioactive waste managed?
- What are radioisotope applications in industry?
- What is uranium enrichment? Why does a PHWR not need it?
- Why is a BARC interview considered fundamentals-heavy, and how should you prepare?
- CSTR or PFR — which needs a smaller volume and why?
- What is residence time distribution and why is it measured?
- What is the Thiele modulus and effectiveness factor?
- How do you size a process pipeline?
- Explain P, PI and PID control. What does each term do?
- How is level measured in a pressurised vessel?
- What is SIL and what is a safety instrumented function?
- How do you read a P&ID? What do the instrument tag letters mean?
- What is a first-order system and time constant?
- What is HAZOP? Explain guide words with an example.
- What is the difference between a safety valve, a relief valve and a rupture disc?
- What is a permit-to-work system? Name the types of permits.
- What is LOTO (lock-out tag-out)?
- What are LEL and UEL? What is flash point and auto-ignition temperature?
- Explain the fire triangle and classes of fire. Which extinguisher for which fire?
- What happened at Bhopal? What lessons did the industry learn?
- Why are vessels purged with nitrogen before start-up and before maintenance?
- What is Management of Change (MOC)?
- What is the hierarchy of controls?
- What do you do if you see a hydrocarbon leak in the plant?
- Why is boiler feed water treated? What is a deaerator?
- How does a DM (demineralisation) plant work?
- Why is instrument air dried? What is its dew point?
- Why do plants use nitrogen? How is it produced?
- What is cooling water treatment and what is cycles of concentration?
- What is the difference between a fire-tube and a water-tube boiler?
- What is steam quality and why does it matter?
- What types of corrosion occur in process plants?
- What is the difference between design pressure, operating pressure and MAWP? What is a hydrotest?
- What are NDT methods used in plants?
- Why is stainless steel used and why can it still crack?
- What is a turnaround (shutdown) and what does a process engineer do in it?
- Tell me about yourself.
- Why do you want to join a PSU (or this company)?
- Explain your final-year project.
- What did you learn during your industrial training or internship?
- What are your strengths and weaknesses?
- Are you willing to work in shifts and remote locations?
- What current developments in the energy sector do you know?
- Why should we hire you?
- A senior asks you to bypass an interlock to restart a unit quickly. What do you do?
- Where do you see yourself in five years?
- Can water be made from air? How?
- What are the types of work permits?
- What PPE is used in a plant? Name types of gloves and their uses.
- How does an incident happen? What is the difference between a near miss, an incident and an accident?
- Can working in a plant affect smell or cause health problems like hair loss? How are workers protected?
- How does the purchase process work in a PSU plant? Explain indent, quotation and purchase order.
- What is delegation of financial powers? Why can an officer approve only up to a limit (e.g. ₹50 000 a month)?
- How is a departmental budget prepared and controlled?
- How should an engineer write an official email to a vendor or another department?
- What is the future of the oil and gas industry?
- What is GeM and what are the types of tenders?
- What is L1 and how are bids compared?
- What is the difference between a purchase order and a work order (service contract)?
- What do you know about the organisation you are applying to?
- How would you handle a disagreement with a senior operator who has more experience than you?
- What is the difference between a gas mask (canister respirator) and an SCBA? When is each used?
- How do you keep a healthy body and mind while working rotating shifts?
- How many people are needed for a maintenance job, and what safety measures apply in different situations?
- What is a gas detector and how are fixed gas detectors used in plants?
Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.