Short answer: For a cylinder, r_c = k/h. Below this radius adding insulation increases heat loss; above it, insulation reduces it.
Why
Insulation adds conduction resistance but also increases the outer surface area for convection. For small radii the area effect wins.
How
- Total resistance R = ln(r/r₁)/(2πkL) + 1/(2πrLh); dR/dr = 0 gives r = k/h.
- For electrical wires, insulation thinner than r_c helps cooling.
- For steam pipes the pipe radius already exceeds r_c, so insulation always helps.
Likely focus at
BARC, NPCIL, DRDO, ISRO, IOCL, HPCL, BPCL, NRL, MRPL, CPCL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What is the critical radius of insulation?
For a cylinder, r_c = k/h. Below this radius adding insulation increases heat loss; above it, insulation reduces it. Why: Insulation adds conduction resistance but also increases the outer surface area for convection. For small radii the area effect wins.
Related questions
- Why is counter-current flow preferred in heat exchangers?
- Which fluid goes on the tube side of a shell-and-tube exchanger, and why?
- What is fouling? How does it affect a heat exchanger and how is it controlled?
- What is the difference between fixed tube sheet, U-tube and floating-head exchangers?
- Why is steam used as a heating medium? Why saturated rather than superheated steam?
- What is a steam trap? Name the types.