Short answer: It gives a higher mean temperature difference (LMTD) for the same terminal temperatures, so less area, and the cold outlet can be hotter than the hot outlet.
Why
In counter-flow the hot inlet meets the cold outlet; the temperature difference stays more uniform along the length. In co-current flow the large difference at the inlet is wasted and both outlets approach a common temperature.
How
- Q = UAΔT_lm with ΔT_lm = (ΔT₁ − ΔT₂)/ln(ΔT₁/ΔT₂).
- Multipass shell-and-tube units are corrected with F_T; keep F_T ≥ 0.75.
- Co-current is used when the cold fluid must not overheat (heat-sensitive products) or a fast initial quench is wanted.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Why is counter-current flow preferred in heat exchangers?
It gives a higher mean temperature difference (LMTD) for the same terminal temperatures, so less area, and the cold outlet can be hotter than the hot outlet. Why: In counter-flow the hot inlet meets the cold outlet; the temperature difference stays more uniform along the length. In co-current flow the large difference at the inlet is wasted and both outlets approach a common temperature.
Related questions
- Which fluid goes on the tube side of a shell-and-tube exchanger, and why?
- What is fouling? How does it affect a heat exchanger and how is it controlled?
- What is the difference between fixed tube sheet, U-tube and floating-head exchangers?
- Why is steam used as a heating medium? Why saturated rather than superheated steam?
- What is a steam trap? Name the types.
- Explain the working of a fired heater (furnace) in a refinery.