IITIAN1997 STUDIO

Explain the working of a fired heater (furnace) in a refinery.

Heat exchangers, furnaces & steam · interview question with WHY and HOW

Ask your own question →

Short answer: Fuel burns in a firebox; process fluid in tubes is heated by radiation in the radiant section and by hot flue gas in the convection section; the stack creates draft.

Why

Most heat (~60–70 %) transfers by radiation at flame temperatures; the convection section recovers heat from the cooler flue gas to raise efficiency.

How

  1. Control outlet temperature by fuel firing; keep excess air ~10–20 % (O₂ 2–4 %) for efficiency and complete combustion.
  2. Maintain negative draft at the arch so flames and hot gas do not leak out.
  3. Watch tube-skin temperatures (coking, creep) and flame impingement.
  4. Air preheaters and steam generation in the convection section improve efficiency to ~90 %.

What you learn only in industry

Low O₂ with rising CO is a dangerous sign (afterburning, explosion risk on air ingress). Heater trips on low fuel pressure and loss of flame (flame scanners) are standard interlocks.

Likely focus at

IOCL, HPCL, BPCL, NRL, MRPL, CPCL, EIL, BCPL, GAIL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.

Frequently asked questions

Explain the working of a fired heater (furnace) in a refinery.

Fuel burns in a firebox; process fluid in tubes is heated by radiation in the radiant section and by hot flue gas in the convection section; the stack creates draft. Why: Most heat (~60–70 %) transfers by radiation at flame temperatures; the convection section recovers heat from the cooler flue gas to raise efficiency.

Related questions

Ask your own question →