Short answer: Flooding is when liquid cannot flow down because vapour flow is too high (or downcomers back up); liquid accumulates and the column fills.
Why
High vapour velocity entrains liquid upward and raises tray pressure drop, which raises liquid height in downcomers until they overflow onto the tray above.
How
- Signs: sharp rise in column ΔP, drop in bottom level, loss of separation, liquid in the overhead.
- Causes: high feed or boil-up, foaming, damaged or plugged trays, high reflux.
- Fix: reduce boil-up or feed, add antifoam, inspect trays at turnaround.
- Design at 70–85 % of flooding velocity.
What you learn only in industry
Panel operators watch column ΔP trends more than any analyser; a gamma scan during operation shows which trays are flooded or damaged without opening the column.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, BARC. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What is flooding in a distillation column? What are its signs and causes?
Flooding is when liquid cannot flow down because vapour flow is too high (or downcomers back up); liquid accumulates and the column fills. Why: High vapour velocity entrains liquid upward and raises tray pressure drop, which raises liquid height in downcomers until they overflow onto the tray above.
Related questions
- What is reflux and why is it needed in a distillation column?
- What are weeping and entrainment on trays?
- Why is vacuum distillation used for heavy residues?
- What is an azeotrope? How do you separate one?
- How do you choose between a tray column and a packed column?
- Why does an absorber operate at high pressure and low temperature, and a stripper at low pressure and high temperature?