Short answer: To prevent condensation and freezing in instrument lines and pneumatic actuators; pressure dew point is typically −40 °C.
Why
Water and oil in air corrode and block small instrument tubing and valve positioners, causing control failures.
How
- Oil-free compressors, after-cooler, separator, desiccant (heatless or heated) dryers, filters.
- Instrument air header kept separate from plant (utility) air; air receiver provides hold-up time on compressor trip.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, BARC, NPCIL, Heavy Water Board, DRDO, ISRO. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Why is instrument air dried? What is its dew point?
To prevent condensation and freezing in instrument lines and pneumatic actuators; pressure dew point is typically −40 °C. Why: Water and oil in air corrode and block small instrument tubing and valve positioners, causing control failures.
Related questions
- Why is boiler feed water treated? What is a deaerator?
- How does a DM (demineralisation) plant work?
- Why do plants use nitrogen? How is it produced?
- What is cooling water treatment and what is cycles of concentration?
- What is an effluent treatment plant in a refinery?
- What is the difference between a fire-tube and a water-tube boiler?