Short answer: Moderator slows fast neutrons to thermal energy where fission of U-235 is likely; coolant removes heat; control rods absorb neutrons to control or stop the chain reaction.
Why
Thermal neutrons have a much higher fission cross-section in U-235; absorbers (boron, cadmium) make k_eff below 1.
How
- Moderators: light water, heavy water, graphite.
- Coolants: water, heavy water, CO₂, liquid sodium (fast reactors).
- Shutdown systems: rods and liquid poison injection (gadolinium nitrate in PHWR).
Likely focus at
BARC, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What is the role of moderator, coolant and control rods in a reactor?
Moderator slows fast neutrons to thermal energy where fission of U-235 is likely; coolant removes heat; control rods absorb neutrons to control or stop the chain reaction. Why: Thermal neutrons have a much higher fission cross-section in U-235; absorbers (boron, cadmium) make k_eff below 1.
Related questions
- Why does India’s PHWR use heavy water? Why can it use natural uranium?
- How is heavy water produced? Explain the bithermal exchange principle.
- Describe India’s three-stage nuclear power programme.
- What is the PUREX process?
- Why must a reactor be cooled even after shutdown?
- What are the units of radiation dose? What is ALARA?