Short answer: By chemical exchange of deuterium between two compounds in cold and hot towers — e.g. hydrogen sulphide–water (Girdler sulphide) or ammonia–hydrogen — followed by vacuum distillation to final purity.
Why
The equilibrium distribution of deuterium between the compounds depends on temperature: in H₂S–water, deuterium prefers water in the cold tower and moves back to H₂S in the hot tower, so cycling between them enriches one stream.
How
- Natural water has ~150 ppm D; many stages of enrichment reach ~15–30 %.
- Final enrichment by vacuum distillation of water to 99.8 % D₂O (reactor grade).
- India has operated plants using both H₂S–water and ammonia-based processes; the Heavy Water Board runs them.
What you learn only in industry
H₂S–water plants handle large inventories of toxic H₂S — safety systems dominate their design.
Likely focus at
BARC, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
How is heavy water produced? Explain the bithermal exchange principle.
By chemical exchange of deuterium between two compounds in cold and hot towers — e.g. hydrogen sulphide–water (Girdler sulphide) or ammonia–hydrogen — followed by vacuum distillation to final purity. Why: The equilibrium distribution of deuterium between the compounds depends on temperature: in H₂S–water, deuterium prefers water in the cold tower and moves back to H₂S in the hot tower, so cycling between them enriches one stream.
Related questions
- Why does India’s PHWR use heavy water? Why can it use natural uranium?
- Describe India’s three-stage nuclear power programme.
- What is the PUREX process?
- Why must a reactor be cooled even after shutdown?
- What are the units of radiation dose? What is ALARA?
- What is the role of moderator, coolant and control rods in a reactor?