Short answer: φ compares reaction rate with pore-diffusion rate in a catalyst pellet; η = actual rate / rate if the whole pellet saw surface concentration.
Why
Fast reactions consume reactant before it penetrates the pores; the inside of the pellet is wasted (η ≈ 1/φ at large φ).
How
- φ = L√(k/D_e).
- Small φ (< 0.4): η ≈ 1. Large φ: η ≈ 1/φ.
- Use smaller pellets, egg-shell catalysts or larger pores to raise η.
Likely focus at
BARC, EIL, IOCL, HPCL, BPCL, NRL, MRPL, CPCL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What is the Thiele modulus and effectiveness factor?
φ compares reaction rate with pore-diffusion rate in a catalyst pellet; η = actual rate / rate if the whole pellet saw surface concentration. Why: Fast reactions consume reactant before it penetrates the pores; the inside of the pellet is wasted (η ≈ 1/φ at large φ).
Related questions
- CSTR or PFR — which needs a smaller volume and why?
- What is a catalyst? Does it change equilibrium?
- What is a runaway reaction and how is it prevented?
- What is residence time distribution and why is it measured?
- Why is ammonia synthesis carried out at high pressure and moderate temperature?
- Batch or continuous process — how do you decide?