Short answer: Continuous for large, steady production of one product; batch for small volumes, many products, long reactions or strict traceability (pharma, speciality chemicals).
Why
Continuous plants have lower cost per tonne and steady quality but are inflexible; batch plants are flexible but have downtime and labour per batch.
How
- Rule of thumb: above ~5000 t/y of one product, continuous is usually cheaper.
- Semi-batch to control exotherms.
- Hybrid trains (batch reaction, continuous separation) are common.
Likely focus at
DRDO, IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Batch or continuous process — how do you decide?
Continuous for large, steady production of one product; batch for small volumes, many products, long reactions or strict traceability (pharma, speciality chemicals). Why: Continuous plants have lower cost per tonne and steady quality but are inflexible; batch plants are flexible but have downtime and labour per batch.
Related questions
- CSTR or PFR — which needs a smaller volume and why?
- What is a catalyst? Does it change equilibrium?
- What is a runaway reaction and how is it prevented?
- What is residence time distribution and why is it measured?
- Why is ammonia synthesis carried out at high pressure and moderate temperature?
- What is the Thiele modulus and effectiveness factor?