Short answer: N₂ + 3H₂ ⇌ 2NH₃ is exothermic with a decrease in moles: high pressure (150–250 bar) favours equilibrium; temperature (~400–500 °C) is a compromise between rate and equilibrium.
Why
Le Chatelier: fewer moles on the product side favours high P; exothermic reaction favours low T, but the iron catalyst is too slow at low T.
How
- Iron catalyst promoted with K₂O and Al₂O₃.
- Conversion per pass ~15–25 %; ammonia condensed and unreacted gas recycled; purge removes inerts (Ar, CH₄).
- Interbed cooling keeps the reaction on track.
Likely focus at
NFL, RCF, BVFCL, GAIL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Why is ammonia synthesis carried out at high pressure and moderate temperature?
N₂ + 3H₂ ⇌ 2NH₃ is exothermic with a decrease in moles: high pressure (150–250 bar) favours equilibrium; temperature (~400–500 °C) is a compromise between rate and equilibrium. Why: Le Chatelier: fewer moles on the product side favours high P; exothermic reaction favours low T, but the iron catalyst is too slow at low T.
Related questions
- CSTR or PFR — which needs a smaller volume and why?
- What is a catalyst? Does it change equilibrium?
- What is a runaway reaction and how is it prevented?
- What is residence time distribution and why is it measured?
- What is the Thiele modulus and effectiveness factor?
- Batch or continuous process — how do you decide?