IITIAN1997 STUDIO

What is LOTO (lock-out tag-out)?

Process safety & plant practice · interview question with WHY and HOW

Ask your own question →

Short answer: A procedure to isolate all energy sources (electrical, pressure, chemical, mechanical, thermal) and lock and tag them so equipment cannot be started or opened while people work on it.

Why

A pump started remotely or a valve opened by someone unaware can kill a worker inside equipment.

How

  1. Identify all energy sources from P&ID and single-line diagram.
  2. Switch off and rack out breakers; close and lock valves; insert spades/blinds for positive isolation.
  3. Each worker puts a personal lock; verify zero energy (try-start, check pressure gauges, bleed).
  4. Remove locks only by owners after work.

Likely focus at

IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, BARC, NPCIL, Heavy Water Board, DRDO, ISRO. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.

Frequently asked questions

What is LOTO (lock-out tag-out)?

A procedure to isolate all energy sources (electrical, pressure, chemical, mechanical, thermal) and lock and tag them so equipment cannot be started or opened while people work on it. Why: A pump started remotely or a valve opened by someone unaware can kill a worker inside equipment.

Related questions

Ask your own question →