Short answer: Uniform, pitting, crevice, galvanic, stress corrosion cracking (chloride SCC of stainless, caustic cracking), hydrogen damage (HIC, high-temperature hydrogen attack), erosion–corrosion, corrosion under insulation (CUI), microbiologically influenced corrosion.
Why
Each needs a specific combination of material, environment and stress; recognising the mechanism decides the cure.
How
- Material selection (SS 316L, duplex, alloy 625), corrosion allowance.
- Inhibitors, pH control, coatings, cathodic protection.
- Inspection: thickness surveys, risk-based inspection, coupons, probes.
What you learn only in industry
CUI on lines operating between ~−4 and 150 °C is one of the commonest hidden failures; insulation is stripped at intervals to inspect.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, BARC, NPCIL, Heavy Water Board, DRDO, ISRO. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What types of corrosion occur in process plants?
Uniform, pitting, crevice, galvanic, stress corrosion cracking (chloride SCC of stainless, caustic cracking), hydrogen damage (HIC, high-temperature hydrogen attack), erosion–corrosion, corrosion under insulation (CUI), microbiologically influenced corrosion. Why: Each needs a specific combination of material, environment and stress; recognising the mechanism decides the cure.
Related questions
- What is cathodic protection?
- What is the difference between design pressure, operating pressure and MAWP? What is a hydrotest?
- What are NDT methods used in plants?
- Why are mechanical seals preferred over gland packing for pumps?
- What is pipe schedule and flange rating?
- What is creep? Where is it a concern?