Short answer: Zirconium has very low neutron absorption, good corrosion resistance in hot water and adequate strength.
Why
Structural materials in the core must not waste neutrons; zirconium absorbs far fewer than steel.
How
- Zircaloy-2/4 for cladding; Zr-2.5Nb for PHWR pressure tubes.
- Concerns: hydrogen pick-up and hydride embrittlement, Zr–steam reaction at high temperature in accidents.
- India’s Nuclear Fuel Complex, Hyderabad, makes fuel and zirconium components.
Likely focus at
BARC, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Why is zirconium alloy used for fuel cladding and pressure tubes?
Zirconium has very low neutron absorption, good corrosion resistance in hot water and adequate strength. Why: Structural materials in the core must not waste neutrons; zirconium absorbs far fewer than steel.
Related questions
- Why does India’s PHWR use heavy water? Why can it use natural uranium?
- How is heavy water produced? Explain the bithermal exchange principle.
- Describe India’s three-stage nuclear power programme.
- What is the PUREX process?
- Why must a reactor be cooled even after shutdown?
- What are the units of radiation dose? What is ALARA?