Short answer: A SIF is an automatic trip (sensor, logic solver, final element) that brings a process to a safe state; SIL (1–4) states how reliable it must be.
Why
Risk reduction must match the hazard: SIL 1 reduces risk 10–100 times, SIL 2 100–1000, SIL 3 1000–10 000.
How
- Identify hazards (HAZOP), set target via LOPA.
- Design redundancy (2oo3 voting), proof testing intervals.
- Standards: IEC 61508/61511.
What you learn only in industry
Interlock bypasses must be authorised and logged; bypassed trips are a common finding in incident investigations.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NPCIL, BARC. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What is SIL and what is a safety instrumented function?
A SIF is an automatic trip (sensor, logic solver, final element) that brings a process to a safe state; SIL (1–4) states how reliable it must be. Why: Risk reduction must match the hazard: SIL 1 reduces risk 10–100 times, SIL 2 100–1000, SIL 3 1000–10 000.
Related questions
- Explain P, PI and PID control. What does each term do?
- What is the difference between fail-open and fail-close valves? How do you decide?
- What is cascade control? Give an example.
- What is feed-forward and ratio control?
- What is the difference between DCS, PLC and SCADA?
- How is level measured in a pressurised vessel?