Frequently asked questions
How are chemical engineers recruited at DRDO?
Scientist ‘B’ posts are filled by RAC through GATE scores and interviews. Always confirm in the current official notification.
What should I prepare for a DRDO chemical engineering interview?
DRDO (Defence Research and Development Organisation) works in defence research: Propellants and explosives, materials, chemical defence, fuel cells. Likely focus areas: Thermodynamics & energy, Reactors & catalysts, Materials, corrosion & equipment, Process safety & plant practice, Heat exchangers, furnaces & steam.
Defence Research and Development Organisation: official website
Questions to prepare (67)
- What is the Joule–Thomson effect? Where is it used?
- What is the triple point and the critical point?
- What is fugacity and why do we need it?
- State the phase rule. How many degrees of freedom does boiling water have?
- What is entropy? Give a practical meaning.
- CSTR or PFR — which needs a smaller volume and why?
- What is a runaway reaction and how is it prevented?
- Batch or continuous process — how do you decide?
- What types of corrosion occur in process plants?
- What is the difference between design pressure, operating pressure and MAWP? What is a hydrotest?
- What are NDT methods used in plants?
- Why is stainless steel used and why can it still crack?
- What is a turnaround (shutdown) and what does a process engineer do in it?
- What is HAZOP? Explain guide words with an example.
- What is the difference between a safety valve, a relief valve and a rupture disc?
- What is a permit-to-work system? Name the types of permits.
- What is LOTO (lock-out tag-out)?
- What are LEL and UEL? What is flash point and auto-ignition temperature?
- Explain the fire triangle and classes of fire. Which extinguisher for which fire?
- What happened at Bhopal? What lessons did the industry learn?
- Why are vessels purged with nitrogen before start-up and before maintenance?
- What is static electricity hazard and how are bonding and earthing used?
- What is Management of Change (MOC)?
- What is the hierarchy of controls?
- What do you do if you see a hydrocarbon leak in the plant?
- What are the types of work permits?
- What PPE is used in a plant? Name types of gloves and their uses.
- How does an incident happen? What is the difference between a near miss, an incident and an accident?
- Can working in a plant affect smell or cause health problems like hair loss? How are workers protected?
- What is the difference between a gas mask (canister respirator) and an SCBA? When is each used?
- How many people are needed for a maintenance job, and what safety measures apply in different situations?
- What is a gas detector and how are fixed gas detectors used in plants?
- What is the critical radius of insulation?
- What do Nusselt, Prandtl and Biot numbers tell you?
- What is a thermocouple and how does it work? Compare with RTD.
- How do you read a P&ID? What do the instrument tag letters mean?
- What is a first-order system and time constant?
- How do you control the temperature of an exothermic reactor?
- Why is boiler feed water treated? What is a deaerator?
- How does a DM (demineralisation) plant work?
- Why is instrument air dried? What is its dew point?
- Why do plants use nitrogen? How is it produced?
- What is cooling water treatment and what is cycles of concentration?
- What is the difference between a fire-tube and a water-tube boiler?
- What is steam quality and why does it matter?
- How is nitric acid made?
- Tell me about yourself.
- Why do you want to join a PSU (or this company)?
- Explain your final-year project.
- What did you learn during your industrial training or internship?
- What are your strengths and weaknesses?
- Are you willing to work in shifts and remote locations?
- What current developments in the energy sector do you know?
- Why should we hire you?
- A senior asks you to bypass an interlock to restart a unit quickly. What do you do?
- Where do you see yourself in five years?
- Can water be made from air? How?
- How does the purchase process work in a PSU plant? Explain indent, quotation and purchase order.
- What is delegation of financial powers? Why can an officer approve only up to a limit (e.g. ₹50 000 a month)?
- How is a departmental budget prepared and controlled?
- How should an engineer write an official email to a vendor or another department?
- What is the future of the oil and gas industry?
- What is GeM and what are the types of tenders?
- What is L1 and how are bids compared?
- What is the difference between a purchase order and a work order (service contract)?
- What do you know about the organisation you are applying to?
- How do you keep a healthy body and mind while working rotating shifts?
Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.