Short answer: To remove inerts or by-products that enter with the feed and would otherwise accumulate without limit in the loop.
Why
Steady state requires every species entering to leave; inerts have no other exit.
How
- Purge fraction set by balance: inert in feed = inert out with purge.
- Ammonia loop purges argon and methane; hydrogen is recovered from the purge by PSA or membranes.
Likely focus at
NFL, RCF, BVFCL, IOCL, HPCL, BPCL, NRL, MRPL, CPCL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Why is a purge stream necessary in a recycle loop?
To remove inerts or by-products that enter with the feed and would otherwise accumulate without limit in the loop. Why: Steady state requires every species entering to leave; inerts have no other exit.
Related questions
- CSTR or PFR — which needs a smaller volume and why?
- What is a catalyst? Does it change equilibrium?
- What is a runaway reaction and how is it prevented?
- What is residence time distribution and why is it measured?
- Why is ammonia synthesis carried out at high pressure and moderate temperature?
- What is the Thiele modulus and effectiveness factor?