Short answer: Insulation reduces heat loss or gain, protects people from hot surfaces, prevents condensation on cold lines and keeps process temperatures stable. Glass wool for moderate temperatures (up to ~250–450 °C depending on grade), rock/mineral wool for higher temperatures, calcium silicate for high-temperature rigid insulation, PUF/PIR and nitrile foam for cold service.
Why
These materials trap still air in fine fibres or pores, giving very low thermal conductivity (~0.03–0.06 W/m·K).
How
- Hot insulation: mineral wool + aluminium cladding to keep water out.
- Cold insulation: closed-cell foam with vapour barrier.
- Personnel protection: insulation or guards where surface > ~60 °C.
- Damaged cladding lets water in and causes corrosion under insulation (CUI).
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Why are lines and equipment insulated? What are glass wool, rock wool and calcium silicate used for?
Insulation reduces heat loss or gain, protects people from hot surfaces, prevents condensation on cold lines and keeps process temperatures stable. Glass wool for moderate temperatures (up to ~250–450 °C depending on grade), rock/mineral wool for higher temperatures, calcium silicate for high-temperature rigid insulation, PUF/PIR and nitrile foam for cold service. Why: These materials trap still air in fine fibres or pores, giving very low thermal conductivity (~0.03–0.06 W/m·K).
Related questions
- How do you know whether a gate valve, a globe valve or a butterfly valve is open or closed?
- What is an NRV (non-return valve)? Where is it fitted on a pump and why?
- Why is the discharge isolation (gate) valve placed after the NRV on a pump?
- What does “crack open” a valve mean?
- What are LO, LC, CSO, CSC (always-open and always-closed) valves?
- What is a pneumatic control valve? What do air-to-open and air-to-close mean?