Short answer: A check valve that lets flow pass one way only; fitted on every pump discharge to stop reverse flow when the pump stops.
Why
Without it, liquid from the header would flow back through a stopped pump, spinning it backwards, draining the system and possibly damaging the seal.
How
- Types: swing check, lift check, dual-plate (wafer), piston, ball.
- Install in the correct flow direction (arrow on the body).
- Swing checks need horizontal or upward flow.
- NRVs can leak; they are not isolation valves — positive isolation still needs a gate valve and blinds.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What is an NRV (non-return valve)? Where is it fitted on a pump and why?
A check valve that lets flow pass one way only; fitted on every pump discharge to stop reverse flow when the pump stops. Why: Without it, liquid from the header would flow back through a stopped pump, spinning it backwards, draining the system and possibly damaging the seal.
Related questions
- How do you know whether a gate valve, a globe valve or a butterfly valve is open or closed?
- Why is the discharge isolation (gate) valve placed after the NRV on a pump?
- What does “crack open” a valve mean?
- What are LO, LC, CSO, CSC (always-open and always-closed) valves?
- What is a pneumatic control valve? What do air-to-open and air-to-close mean?
- What is a solenoid valve and how does it open?