IITIAN1997 STUDIO

What do the different line types mean on a P&ID?

Valves, piping & fittings · interview question with WHY and HOW

Ask your own question →

Short answer: Thick solid: main process lines; thin solid: utility or secondary lines; dashed: electrical signals; line with short double hashes: pneumatic signal; dash-dot: capillary or data link; dotted/heat-traced lines with special symbols.

Why

A standard drawing language (ISA 5.1) lets anyone read signals and piping at a glance.

How

  1. Learn the instrument bubble: circle in field, circle with line = DCS/panel.
  2. Arrows show flow direction; reducers, blinds and spectacle blinds have symbols.
  3. Check the legend sheet of your plant’s P&ID set.

Likely focus at

IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.

Frequently asked questions

What do the different line types mean on a P&ID?

Thick solid: main process lines; thin solid: utility or secondary lines; dashed: electrical signals; line with short double hashes: pneumatic signal; dash-dot: capillary or data link; dotted/heat-traced lines with special symbols. Why: A standard drawing language (ISA 5.1) lets anyone read signals and piping at a glance.

Related questions

Ask your own question →