Short answer: Steam coils (in tanks), jackets and limpet coils (reactors), electric immersion heaters, electrical and steam tracing on lines, thermal-oil (hot-oil) heaters, fired heaters and line heaters.
Why
Viscous liquids (fuel oil, wax, bitumen, sulphur) and freezing-prone lines must be kept warm; reactors need controlled heating.
How
- Tank coils keep fuel oil pumpable; condensate drains through traps.
- Steam tracing: small tube alongside the line under insulation.
- Electric tracing: self-regulating cables, used where steam is unavailable.
- Hot-oil systems give high temperature at low pressure.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What are the types of heaters and coils used in process plants?
Steam coils (in tanks), jackets and limpet coils (reactors), electric immersion heaters, electrical and steam tracing on lines, thermal-oil (hot-oil) heaters, fired heaters and line heaters. Why: Viscous liquids (fuel oil, wax, bitumen, sulphur) and freezing-prone lines must be kept warm; reactors need controlled heating.
Related questions
- Why is counter-current flow preferred in heat exchangers?
- Which fluid goes on the tube side of a shell-and-tube exchanger, and why?
- What is fouling? How does it affect a heat exchanger and how is it controlled?
- What is the difference between fixed tube sheet, U-tube and floating-head exchangers?
- Why is steam used as a heating medium? Why saturated rather than superheated steam?
- What is a steam trap? Name the types.