Short answer: A ferrule is the ring in a compression fitting that grips small instrument tubing and seals it; stud bolts with nuts clamp flanges together; a gasket between flanges makes the seal.
Why
Joints must be leak-tight yet removable for maintenance.
How
- Instrument tubing (6–12 mm) uses double-ferrule compression fittings; tighten to the specified turns.
- Flange stud bolts are tightened in a criss-cross sequence to the specified torque.
- Gaskets: spiral-wound for hydrocarbons and steam, ring-joint for high pressure, compressed fibre for water.
- Never reuse spiral-wound gaskets.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What are a ferrule, a nut-and-bolt (stud bolt) and a gasket used for in piping?
A ferrule is the ring in a compression fitting that grips small instrument tubing and seals it; stud bolts with nuts clamp flanges together; a gasket between flanges makes the seal. Why: Joints must be leak-tight yet removable for maintenance.
Related questions
- How do you know whether a gate valve, a globe valve or a butterfly valve is open or closed?
- What is an NRV (non-return valve)? Where is it fitted on a pump and why?
- Why is the discharge isolation (gate) valve placed after the NRV on a pump?
- What does “crack open” a valve mean?
- What are LO, LC, CSO, CSC (always-open and always-closed) valves?
- What is a pneumatic control valve? What do air-to-open and air-to-close mean?