Short answer: Mainly as the catalyst in sulphuric-acid alkylation units, which combine isobutane with C₃–C₄ olefins to make alkylate (a clean, high-octane petrol component); also for pH control and regeneration of cation-exchange resins in water treatment.
Why
Strong acid promotes the carbocation reactions of alkylation at low temperature; alkylate has no aromatics, olefins or sulphur.
How
- Acid strength is kept above ~88–90 %; spent acid is regenerated.
- Some refineries recover sulphur as sulphuric acid (wet sulphuric acid process) instead of elemental sulphur.
- Acid handling needs acid-resistant PPE and materials.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, EIL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Why is sulphuric acid used in refineries?
Mainly as the catalyst in sulphuric-acid alkylation units, which combine isobutane with C₃–C₄ olefins to make alkylate (a clean, high-octane petrol component); also for pH control and regeneration of cation-exchange resins in water treatment. Why: Strong acid promotes the carbocation reactions of alkylation at low temperature; alkylate has no aromatics, olefins or sulphur.
Related questions
- Describe the flow of crude oil through a refinery.
- Why is crude oil desalted? How does a desalter work?
- How does an FCC unit work? Why is the catalyst regenerated?
- What is catalytic reforming? What is the role of hydrogen there?
- Why is hydrotreating needed? What reactions occur?
- What is octane number and cetane number?