Short answer: Crude is desalted, heated and split in the atmospheric unit; residue goes to vacuum distillation; cuts are upgraded by cracking (FCC, hydrocracking, coking), reforming and treating, then blended into products.
Why
Crude contains everything from gas to asphalt; markets want mostly light, clean fuels, so primary distillation is followed by conversion and treating.
How
- Primary: desalter → preheat train → furnace → atmospheric column (gas, naphtha, kerosene, diesel, residue) → vacuum unit.
- Secondary: FCC/hydrocracker (VGO → gasoline/diesel), delayed coker (residue → light products + coke), catalytic reformer (naphtha → high-octane reformate + H₂), isomerisation.
- Treating: hydrotreaters remove S, N; Merox for kerosene/LPG; SRU recovers sulphur.
- Blending to BS-VI specifications.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, EIL, ONGC, Oil India. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Describe the flow of crude oil through a refinery.
Crude is desalted, heated and split in the atmospheric unit; residue goes to vacuum distillation; cuts are upgraded by cracking (FCC, hydrocracking, coking), reforming and treating, then blended into products. Why: Crude contains everything from gas to asphalt; markets want mostly light, clean fuels, so primary distillation is followed by conversion and treating.