IITIAN1997 STUDIO

Why are daily readings of ampere, pressure and temperature taken for pumps and motors?

Pumps, piping & fluid flow · interview question with WHY and HOW

Ask your own question →

Short answer: To detect problems early: a change in current, pressure, vibration or temperature shows wear, blockage, cavitation or process change before failure.

Why

Motor current reflects load (flow and head); falling discharge pressure means wear or suction problems; rising bearing temperature means lubrication trouble.

How

  1. Log sheet each shift: suction and discharge pressure, motor current, bearing temperature, vibration, seal leakage, lube oil level, running hours.
  2. Compare with normal values; report deviations.
  3. Trend data in DCS or condition-monitoring systems.

What you learn only in industry

The log sheet also proves which pump ran for how long — standby pumps are changed over regularly so both stay healthy.

Likely focus at

IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.

Frequently asked questions

Why are daily readings of ampere, pressure and temperature taken for pumps and motors?

To detect problems early: a change in current, pressure, vibration or temperature shows wear, blockage, cavitation or process change before failure. Why: Motor current reflects load (flow and head); falling discharge pressure means wear or suction problems; rising bearing temperature means lubrication trouble.

Related questions

Ask your own question →