IITIAN1997 STUDIO

Which pump would you choose for which service? Give a quick guide.

Pumps, piping & fluid flow · interview question with WHY and HOW

Ask your own question →

Short answer: Clean liquid, high flow, moderate head → centrifugal; very high head → multistage centrifugal; small flow at high pressure or precise dosing → reciprocating/metering pump; viscous oils → gear, screw or progressive-cavity; slurry → slurry centrifugal or diaphragm; deep sump or river intake → vertical turbine; corrosive/toxic, zero leakage → magnetic-drive or canned pump.

Why

Each pump type has a best range of flow, head, viscosity and solids; using the wrong one wastes energy or fails quickly.

How

  1. Plot required flow and head; check viscosity, NPSH available, solids and temperature.
  2. Check vendor curves and API 610/674/675 standards for refinery service.
  3. Always provide a standby for critical services.

Likely focus at

IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.

Frequently asked questions

Which pump would you choose for which service? Give a quick guide.

Clean liquid, high flow, moderate head → centrifugal; very high head → multistage centrifugal; small flow at high pressure or precise dosing → reciprocating/metering pump; viscous oils → gear, screw or progressive-cavity; slurry → slurry centrifugal or diaphragm; deep sump or river intake → vertical turbine; corrosive/toxic, zero leakage → magnetic-drive or canned pump. Why: Each pump type has a best range of flow, head, viscosity and solids; using the wrong one wastes energy or fails quickly.

Related questions

Ask your own question →