Short answer: Head is the energy given per unit weight of liquid, expressed as a height of liquid column (m). It is independent of density, so a pump gives the same head for water or oil; the pressure rise ΔP = ρgH depends on density.
Why
Centrifugal pumps impart a velocity-based energy that depends on speed and impeller size, not on fluid density.
How
- ΔP (bar) = ρ (kg/m³) × 9.81 × H (m)/10⁵.
- Total head = static head + pressure head difference + friction losses.
- Shut-off head is the head at zero flow.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What is the head of a pump? Why is it expressed in metres and not bar?
Head is the energy given per unit weight of liquid, expressed as a height of liquid column (m). It is independent of density, so a pump gives the same head for water or oil; the pressure rise ΔP = ρgH depends on density. Why: Centrifugal pumps impart a velocity-based energy that depends on speed and impeller size, not on fluid density.
Related questions
- What is NPSH? What is the difference between NPSH available and NPSH required?
- Why is a centrifugal pump started with the discharge valve closed (or slightly open)?
- Why do we prime a centrifugal pump but not a reciprocating pump?
- How do you choose between a centrifugal and a positive-displacement pump?
- What are the pump affinity laws? Why are they useful?
- What happens when two identical centrifugal pumps are run in parallel and in series?