Short answer: They are classified by pressure ratio: fans up to ~1.1, blowers ~1.1–1.2, compressors above ~1.2.
Why
At low ratios gas behaves almost incompressibly; above ~1.2, compression heating and density change dominate and stages, intercoolers and surge control become necessary.
How
- Reciprocating compressors: high ratio, low flow (hydrogen make-up).
- Centrifugal: large flows (recycle gas, refrigeration, air), need anti-surge control.
- Screw: medium flows, instrument air.
- Intercooling between stages approaches isothermal compression and saves power.
What you learn only in industry
Centrifugal compressor trips from surge are a common start-up event; the anti-surge recycle valve is fast and set to fail open.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What is the difference between a compressor, a blower and a fan?
They are classified by pressure ratio: fans up to ~1.1, blowers ~1.1–1.2, compressors above ~1.2. Why: At low ratios gas behaves almost incompressibly; above ~1.2, compression heating and density change dominate and stages, intercoolers and surge control become necessary.
Related questions
- What is NPSH? What is the difference between NPSH available and NPSH required?
- Why is a centrifugal pump started with the discharge valve closed (or slightly open)?
- Why do we prime a centrifugal pump but not a reciprocating pump?
- How do you choose between a centrifugal and a positive-displacement pump?
- What are the pump affinity laws? Why are they useful?
- What happens when two identical centrifugal pumps are run in parallel and in series?