Short answer: Thermal cracking of vacuum residue: feed is heated quickly in a furnace and the cracking and coking happen later in large drums, producing gas, naphtha, gas oils and petroleum coke.
Why
High velocity and short residence in the furnace tubes delay coking until the oil reaches the drums, so tubes do not plug.
How
- Drums fill over ~16–24 h, then switch; the full drum is steamed, cooled and decoked with high-pressure water jets.
- Coker products need hydrotreating.
What you learn only in industry
Drum switching and hydraulic decoking are among the most hazardous routine refinery operations; strict procedures and interlocks apply.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What is delayed coking? Why "delayed"?
Thermal cracking of vacuum residue: feed is heated quickly in a furnace and the cracking and coking happen later in large drums, producing gas, naphtha, gas oils and petroleum coke. Why: High velocity and short residence in the furnace tubes delay coking until the oil reaches the drums, so tubes do not plug.
Related questions
- Describe the flow of crude oil through a refinery.
- Why is crude oil desalted? How does a desalter work?
- How does an FCC unit work? Why is the catalyst regenerated?
- What is catalytic reforming? What is the role of hydrogen there?
- Why is hydrotreating needed? What reactions occur?
- What is octane number and cetane number?