Short answer: By automatic tank gauging (radar, servo or float gauges) with temperature probes, checked by manual dip tape; volume from calibration (strapping) tables, corrected to 15 °C using density.
Why
Stock accounting and custody transfer need accurate quantities; overfilling must be prevented.
How
- Manual dip with tape and bob through the dip hatch; water cut with water-finding paste.
- Calibration chart converts level to volume.
- Independent high-high level alarm/trip protects against overfill.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
How is the level or quantity in a storage tank measured?
By automatic tank gauging (radar, servo or float gauges) with temperature probes, checked by manual dip tape; volume from calibration (strapping) tables, corrected to 15 °C using density. Why: Stock accounting and custody transfer need accurate quantities; overfilling must be prevented.
Related questions
- Describe the flow of crude oil through a refinery.
- Why is crude oil desalted? How does a desalter work?
- How does an FCC unit work? Why is the catalyst regenerated?
- What is catalytic reforming? What is the role of hydrogen there?
- Why is hydrotreating needed? What reactions occur?
- What is octane number and cetane number?