Short answer: Prepare and start B, open its discharge slowly while throttling A’s discharge to keep flow steady, stop A, then close A’s discharge and keep A as standby or isolate it.
Why
Flow to the process must not be interrupted or doubled suddenly.
How
- Check B ready (line-up, lube, seal, vent).
- Start B against closed discharge; confirm pressure.
- Open B discharge while closing A discharge gradually.
- Stop A; check NRV holds (A does not spin backward).
- Update log book and DCS running indication.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
How do you change over from running pump A to standby pump B?
Prepare and start B, open its discharge slowly while throttling A’s discharge to keep flow steady, stop A, then close A’s discharge and keep A as standby or isolate it. Why: Flow to the process must not be interrupted or doubled suddenly.
Related questions
- What is NPSH? What is the difference between NPSH available and NPSH required?
- Why is a centrifugal pump started with the discharge valve closed (or slightly open)?
- Why do we prime a centrifugal pump but not a reciprocating pump?
- How do you choose between a centrifugal and a positive-displacement pump?
- What are the pump affinity laws? Why are they useful?
- What happens when two identical centrifugal pumps are run in parallel and in series?