IITIAN1997 STUDIO

Why is a flare system needed in a refinery?

Process safety & plant practice · interview question with WHY and HOW

Ask your own question →

Short answer: To collect and safely burn gases released by relief valves, depressurisation and start-up/shut-down, instead of venting toxic or flammable gas.

Why

Venting would create flammable clouds and toxic exposure; burning converts hydrocarbons to CO₂ and water at a safe height.

How

  1. Relief header → knock-out drum (removes liquid) → water seal drum (prevents flashback) → flare stack with pilots and steam for smokeless burning.
  2. Purge gas keeps air out of the header.
  3. Flare gas recovery compressors cut routine flaring.

Likely focus at

IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.

Frequently asked questions

Why is a flare system needed in a refinery?

To collect and safely burn gases released by relief valves, depressurisation and start-up/shut-down, instead of venting toxic or flammable gas. Why: Venting would create flammable clouds and toxic exposure; burning converts hydrocarbons to CO₂ and water at a safe height.

Related questions

Ask your own question →