Short answer: Large machines are dynamically balanced, run on well-aligned couplings and good bearings, have smooth hydraulic flow and are often housed in acoustic enclosures or buildings with silencers on air intakes and vents. Even so, compressor and turbine areas are often above 85 dB(A), so hearing protection is required there.
Why
Most machine noise comes from imbalance, misalignment, bearing defects, cavitation, turbulent flow and gas pulsation; good design and maintenance reduce these.
How
- Noise survey maps; signboards in high-noise zones.
- Ear plugs or muffs above 85 dB(A); audiometry check-ups.
- Sudden increase in noise is a warning sign (cavitation, bearing failure, surge).
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Why don’t well-maintained compressors and multistage pumps make as much noise as you might expect? How is plant noise controlled?
Large machines are dynamically balanced, run on well-aligned couplings and good bearings, have smooth hydraulic flow and are often housed in acoustic enclosures or buildings with silencers on air intakes and vents. Even so, compressor and turbine areas are often above 85 dB(A), so hearing protection is required there. Why: Most machine noise comes from imbalance, misalignment, bearing defects, cavitation, turbulent flow and gas pulsation; good design and maintenance reduce these.
Related questions
- What types of corrosion occur in process plants?
- What is cathodic protection?
- What is the difference between design pressure, operating pressure and MAWP? What is a hydrotest?
- What are NDT methods used in plants?
- Why are mechanical seals preferred over gland packing for pumps?
- What is pipe schedule and flange rating?