Short answer: To absorb thermal expansion and contraction of hot or cold lines so that pipes, nozzles and supports are not overstressed.
Why
Steel expands about 1.2 mm per metre per 100 °C; a long steam line can grow by tens of centimetres.
How
- Expansion loops (U-bends) on pipe racks.
- Bellows where space is short (with anchors and guides).
- Pipe stress analysis checks loads on pump and vessel nozzles.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Why are expansion loops and bellows provided in pipelines?
To absorb thermal expansion and contraction of hot or cold lines so that pipes, nozzles and supports are not overstressed. Why: Steel expands about 1.2 mm per metre per 100 °C; a long steam line can grow by tens of centimetres.
Related questions
- What types of corrosion occur in process plants?
- What is cathodic protection?
- What is the difference between design pressure, operating pressure and MAWP? What is a hydrotest?
- What are NDT methods used in plants?
- Why are mechanical seals preferred over gland packing for pumps?
- What is pipe schedule and flange rating?