Short answer: An alarm warns the operator to act; an interlock prevents an unsafe action or sequence (e.g. pump cannot start with suction valve closed); a trip automatically shuts equipment or a unit down when a limit is crossed.
Why
Layers of protection: operator response first, automatic action when it is too late for people.
How
- Typical set points: high alarm (H), high-high trip (HH).
- Permissives allow start only when conditions are healthy.
- Trips are tested periodically; bypasses need authorisation.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What is the difference between an alarm, an interlock and a trip?
An alarm warns the operator to act; an interlock prevents an unsafe action or sequence (e.g. pump cannot start with suction valve closed); a trip automatically shuts equipment or a unit down when a limit is crossed. Why: Layers of protection: operator response first, automatic action when it is too late for people.
Related questions
- How does a Bourdon-tube pressure gauge work?
- What is the difference between a pressure gauge and a pressure transmitter?
- Why is a 4–20 mA signal used and not 0–20 mA?
- What is a DPT (differential pressure transmitter) and where is it used?
- What are the four basic process variables and how is each measured?
- What is a rotameter and why must it be vertical?