Short answer: A transparent column connected to a vessel through top and bottom isolation valves showing liquid level directly; magnetic and reflex types are used for higher pressures and hazardous fluids.
Why
It gives a direct local level reading to cross-check transmitters.
How
- Blow down the glass to clean it: close top valve, open drain, then reverse to flush both connections.
- Ball-check valves in gauge cocks stop flow if the glass breaks.
- Avoid ordinary glass in toxic or high-pressure service.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What is a gauge glass and how is it used safely?
A transparent column connected to a vessel through top and bottom isolation valves showing liquid level directly; magnetic and reflex types are used for higher pressures and hazardous fluids. Why: It gives a direct local level reading to cross-check transmitters.
Related questions
- How does a Bourdon-tube pressure gauge work?
- What is the difference between a pressure gauge and a pressure transmitter?
- Why is a 4–20 mA signal used and not 0–20 mA?
- What is a DPT (differential pressure transmitter) and where is it used?
- What are the four basic process variables and how is each measured?
- What is a rotameter and why must it be vertical?