Short answer: Water is lost by evaporation, drift and blowdown and must be replaced; dosing controls scale, corrosion and biological growth caused by concentrated salts and warm conditions.
Why
Evaporation leaves salts behind; warm, aerated water grows algae and bacteria (including Legionella).
How
- Make-up = evaporation + drift + blowdown.
- Scale and corrosion inhibitors, pH control, oxidising biocide (chlorine) and non-oxidising biocides.
- Monitor COC, pH, conductivity, residual chlorine and corrosion coupons.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
Why does cooling-tower water need make-up and chemical dosing?
Water is lost by evaporation, drift and blowdown and must be replaced; dosing controls scale, corrosion and biological growth caused by concentrated salts and warm conditions. Why: Evaporation leaves salts behind; warm, aerated water grows algae and bacteria (including Legionella).
Related questions
- Why is boiler feed water treated? What is a deaerator?
- How does a DM (demineralisation) plant work?
- Why is instrument air dried? What is its dew point?
- Why do plants use nitrogen? How is it produced?
- What is cooling water treatment and what is cycles of concentration?
- What is an effluent treatment plant in a refinery?