Short answer: By pressure: HP (~40–110 bar), MP (~10–20 bar), LP (~3–5 bar) headers; by condition: superheated (for turbines) and saturated (for heating); also flash steam and stripping steam. Generated in boilers, waste-heat boilers, HRSGs and process heat recovery (e.g. after reformers, FCC flue gas).
Why
Different users need different temperatures; letting down HP through turbines produces power before process use.
How
- DM water → deaerator → boiler feed pump → economiser → drum → superheater.
- Pressure-reducing and desuperheating stations (PRDS) balance headers.
- Condensate is returned and reused to save water and energy.
Likely focus at
IOCL, HPCL, BPCL, NRL, MRPL, CPCL, ONGC, Oil India, GAIL, BCPL, EIL, NFL, RCF, BVFCL, NPCIL, Heavy Water Board. Organisation names show where a topic is a likely focus because of what the organisation does; they are not claims that a particular question was asked. Recruitment routes change each year, so confirm in the official notification.
Frequently asked questions
What are the types of steam in a plant and how is steam generated?
By pressure: HP (~40–110 bar), MP (~10–20 bar), LP (~3–5 bar) headers; by condition: superheated (for turbines) and saturated (for heating); also flash steam and stripping steam. Generated in boilers, waste-heat boilers, HRSGs and process heat recovery (e.g. after reformers, FCC flue gas). Why: Different users need different temperatures; letting down HP through turbines produces power before process use.
Related questions
- Why is boiler feed water treated? What is a deaerator?
- How does a DM (demineralisation) plant work?
- Why is instrument air dried? What is its dew point?
- Why do plants use nitrogen? How is it produced?
- What is cooling water treatment and what is cycles of concentration?
- What is an effluent treatment plant in a refinery?