IITIAN1997 STUDIO

Transport Phenomena

Momentum, heat and mass — one balance.

Open the interactive studio →

The molecular transport analogy, general property balance and continuity, shell balances with and without generation, Hagen–Poiseuille and plate flows, diffusion through stagnant films, Navier–Stokes and convective diffusion from the ASTU CHE181801 syllabus (Brodkey–Hershey, 2018-19 scheme).

What is inside

  • Newton, Fourier and Fick in one form
  • General property balance and continuity
  • Shell balances with generation
  • Navier–Stokes and convective diffusion

Syllabus: ASTU CHE181801 Transport Phenomena, semester 8, 2018-19 scheme. Official syllabus PDF.

Introduction

Topics: Transport phenomena and unit operations; equilibrium and rate processes; role of intermolecular forces.

From unit operations to transport phenomena

Chemical engineering grew up as a set of unit operations — distillation, filtration, heat exchange, drying — each with its own empirical charts. Transport phenomena looks underneath them: every unit operation moves momentum (fluid flow), energy (heat transfer) or mass (diffusion), often all three at once. The same three laws of molecular transport and the same balance equation describe a pipe, a heat exchanger and an absorber, so one way of thinking replaces many separate recipes.

Two questions decide the size of any process. Equilibrium tells where a system is going and how far it can go: the maximum separation on a tray, the final temperature of mixed streams, the extent of reaction. Rate processes tell how fast it gets there: they need a driving force (a difference of velocity, temperature or concentration) and are resisted by the medium. Equipment size is set by rate: duty = (transfer coefficient) × (area) × (driving force). Thermodynamics supplies the equilibrium; transport phenomena supplies the rate.

Molecular transport comes from the motion and interaction of molecules. In gases, molecules fly freely between collisions and carry momentum, energy and identity with them; kinetic theory predicts that viscosity, thermal conductivity and diffusivity all grow with temperature and are related (μ ≈ ⅓ρūλ). In liquids molecules are packed closely and held by intermolecular forces (van der Waals, hydrogen bonding, Lennard-Jones potential), so transport needs a molecule to jump into a hole: liquid viscosity falls with temperature, and liquid diffusivities are about 10⁴ times smaller than gas ones. In solids, heat moves by lattice vibrations (phonons) and free electrons, which is why metals conduct heat well.

  • Unit operations rest on three transports: momentum, heat, mass.
  • Equilibrium: how far. Rate: how fast. Size depends on rate.
  • Rate = driving force/resistance.
  • Gas: μ, k, D rise with T. Liquid: μ falls with T.

Example: Order of magnitude: compare the diffusivity of a gas pair, a solute in water, and a solute in a solid, and say how long diffusion over 1 cm takes in each (t ≈ L²/D).

  1. Gas D ≈ 10⁻⁵ m²/s ⇒ t ≈ 10⁻⁴/10⁻⁵ = 10 s.
  2. Liquid D ≈ 10⁻⁹ m²/s ⇒ t ≈ 10⁵ s ≈ 28 h.
  3. Solid D ≈ 10⁻¹³ m²/s or less ⇒ t ≈ 10⁹ s ≈ 30 years.

Answer: Seconds in gases, a day in liquids, years in solids: why stirring (convection) matters so much in liquids.

Unit operations (distillation, filtration, heat exchange) all rest on transport of momentum, heat and mass. Equilibrium sets the limit; rate processes, driven by gradients and opposed by resistances, set equipment size. Molecular transport arises from molecular motion and intermolecular forces: in gases μ, k and D rise with temperature (kinetic theory); in liquids viscosity falls with temperature and diffusivities are ~10⁻⁹ m²/s; in solids heat moves by phonons and electrons.

  • Same laws describe a pipe, an exchanger and an absorber.
  • Rate = driving force/resistance.
  • Kinetic theory: μ ≈ ⅓ρūλ for gases.
  • Lennard-Jones potential describes intermolecular forces.
  • Diffusion time scales as L²/D.

Key formulas

  • rate = driving force/resistance
  • μ ≈ ⅓ρūλ (gas)
  • t ≈ L²/D

Practice questions

Equipment size in a rate process depends mainly on

  1. equilibrium constant only
  2. driving force and transfer coefficient
  3. molecular weight
  4. heat of formation
Show the answer

Answer: B. driving force and transfer coefficient Duty = coefficient × area × driving force.

Viscosity of a liquid generally

  1. increases with temperature
  2. decreases with temperature
  3. is independent of temperature
  4. depends only on pressure
Show the answer

Answer: B. decreases with temperature Molecules escape the cage more easily when hot.

Gas viscosity, by kinetic theory

  1. decreases with T
  2. increases with T
  3. is zero
  4. depends on density strongly
Show the answer

Answer: B. increases with T μ ∝ √T for hard spheres.

Typical diffusivity of a small solute in water is

  1. 10⁻⁵ m²/s
  2. 10⁻⁹ m²/s
  3. 10⁻¹ m²/s
  4. 10⁻²⁰ m²/s
Show the answer

Answer: B. 10⁻⁹ m²/s Liquids are about 10⁴ slower than gases.

Which is an equilibrium-limited quantity?

  1. heat-transfer coefficient
  2. maximum separation on an ideal stage
  3. pressure drop
  4. diffusion flux
Show the answer

Answer: B. maximum separation on an ideal stage Ideal stage = equilibrium.

Theory questions

Distinguish between equilibrium and rate processes with chemical-engineering examples. (5 marks)

Show the model answer

Equilibrium processes are described by the state the system tends to when left alone: vapour–liquid equilibrium on a distillation tray, solubility of a gas in a solvent, chemical equilibrium conversion. They tell how far a change can go but not how fast. Rate processes describe how fast a system moves towards equilibrium under a driving force: heat flow under a temperature difference, diffusion under a concentration difference, momentum transfer under a velocity difference, reaction under an affinity. Their rate = driving force/resistance, and equipment size (area of an exchanger, height of a packed tower, volume of a reactor) depends on them. Real equipment uses both: equilibrium sets the number of ideal stages; rates set stage efficiency or HTU.

Explain the role of intermolecular forces in molecular transport in gases and liquids. (5 marks)

Show the model answer

In dilute gases molecules travel freely between collisions; intermolecular forces matter only during collisions (described by a potential such as Lennard-Jones, with collision diameter σ and energy ε). Transport properties follow from kinetic theory: μ, k and D_AB increase with temperature and, for μ and k, are almost independent of pressure. In liquids molecules are always within the range of each other’s forces; moving requires breaking out of a cage of neighbours, an activated process, so viscosity falls exponentially with temperature (Andrade, Eyring) and diffusivity (Stokes–Einstein, Wilke–Chang) is small. Strong forces (hydrogen bonding in water, glycerol) give high viscosity. Solids transport heat by lattice vibration and electrons; diffusion is extremely slow.

Molecular transport mechanisms and the analogy

Topics: Heat, mass and momentum transport by molecular mechanism; the analogy — heat, mass and momentum; the analogous forms; heat transfer; mass transfer — equimolar counter-diffusion, partial pressure; momentum transfer.

Three laws, one form

Newton’s law of viscosity, Fourier’s law and Fick’s law all say that a flux is proportional to a gradient. Written in the Brodkey–Hershey form with a diffusivity and a concentration of the transported property, they look identical: flux ψ = −δ dΓ/dz, where Γ is the concentration of the property (momentum per volume ρv, energy per volume ρc_pT, mass per volume c_A) and δ is its diffusivity (ν = μ/ρ, α = k/ρc_p, D_AB), all with units m²/s.

Momentum: τ_zx = −μ dv_x/dz = −ν d(ρv_x)/dz. Heat: q_z/A = −k dT/dz = −α d(ρc_pT)/dz. Mass: J_Az = −D_AB dc_A/dz. Momentum flux is the shear stress, the rate at which x-momentum crosses a plane normal to z, flowing from fast to slow fluid. The ratios of diffusivities are the dimensionless groups Pr = ν/α, Sc = ν/D_AB and Le = α/D_AB, which say how quickly velocity, temperature and concentration profiles develop compared with each other.

In mass transfer the moving species can carry the whole mixture with it. For equimolar counter-diffusion (N_A = −N_B, as in distillation with equal latent heats) the flux is purely diffusive: N_A = D_AB(p_A1 − p_A2)/(RTz), with a linear partial-pressure profile. When B is stagnant (absorption, evaporation into air) the bulk flow adds to diffusion: N_A = (D_ABP/RTz) ln[(P − p_A2)/(P − p_A1)] = D_ABP(p_A1 − p_A2)/(RTz p_BM). The analogy with heat and momentum is exact only for equimolar counter-diffusion and dilute solutions.

  • flux = −diffusivity × gradient of concentration of property
  • ν, α, D_AB all in m²/s
  • Pr = ν/α, Sc = ν/D, Le = α/D
  • Stagnant B: multiply by P/p_BM

Example: Water at the bottom of a narrow tube evaporates into dry air at 25 °C and 1 atm through a stagnant air path 0.1 m long. p_sat = 3.17 kPa, D = 2.6 × 10⁻⁵ m²/s. Find the flux.

  1. p_A1 = 3.17 kPa, p_A2 = 0 (dry air), P = 101.325 kPa.
  2. N_A = (DP/RTz) ln[(P − 0)/(P − 3.17)] = (2.6 × 10⁻⁵ × 101 325/(8.314 × 298 × 0.1)) × ln(1.0323).
  3. DP/(RTz) = 2.634/247.9 = 0.01063 mol/m²·s; × 0.0318 = 3.38 × 10⁻⁴ mol/m²·s.

Answer: 3.4 × 10⁻⁴ mol/m²·s (about 22 g/m²·h); equimolar diffusion would give 3% less.

Newton (τ = −μ dv/dz), Fourier (q = −k dT/dz) and Fick (J_A = −D_AB dc_A/dz) have one form: flux = −δ × d(concentration of property)/dz with diffusivities ν, α, D_AB in m²/s. Ratios give Pr, Sc, Le. Equimolar counter-diffusion: N_A = D_AB(p_A1 − p_A2)/(RTz), linear profile. Diffusion through stagnant B: N_A = D_ABP(p_A1 − p_A2)/(RTz p_BM), larger by P/p_BM because of bulk flow.

  • Momentum flux = shear stress; it flows down the velocity gradient.
  • Pr ≈ 0.7 for gases, ≈ 7 for water.
  • Sc ≈ 1 for gases, ~10³ for liquids.
  • Bulk flow matters when y_A is large.
  • p_BM = (p_B2 − p_B1)/ln(p_B2/p_B1).

Key formulas

  • τ_zx = −ν d(ρv_x)/dz
  • q/A = −α d(ρc_pT)/dz
  • J_A = −D_AB dc_A/dz
  • N_A = D_ABP(p_A1 − p_A2)/(RTz p_BM)

Practice questions

Kinematic viscosity has units of

  1. Pa·s
  2. m²/s
  3. kg/m³
  4. W/m·K
Show the answer

Answer: B. m²/s ν = μ/ρ, a diffusivity.

The Prandtl number is

  1. ν/D
  2. ν/α
  3. α/D
  4. hL/k
Show the answer

Answer: B. ν/α Momentum vs thermal diffusivity.

For equimolar counter-diffusion the partial-pressure profile is

  1. linear
  2. logarithmic
  3. exponential
  4. parabolic
Show the answer

Answer: A. linear No bulk flow.

Diffusion of A through stagnant B gives a flux that is

  1. smaller than equimolar
  2. larger by P/p_BM
  3. zero
  4. independent of P
Show the answer

Answer: B. larger by P/p_BM Bulk flow adds to diffusion.

Lewis number equals

  1. Sc/Pr
  2. Pr/Sc
  3. Re·Pr
  4. Sh/Sc
Show the answer

Answer: A. Sc/Pr Le = α/D = Sc/Pr.

Theory questions

Write the molecular transport laws in analogous form and explain the meaning of each term. (5 marks)

Show the model answer

Brodkey–Hershey write all three as ψ = −δ dΓ/dz. Momentum: τ_zx = −ν d(ρv_x)/dz, Γ = ρv_x is x-momentum per unit volume, δ = ν = μ/ρ. Heat: (q/A)_z = −α d(ρc_pT)/dz, Γ = ρc_pT is thermal energy per volume, δ = α = k/ρc_p. Mass: J_Az = −D_AB dc_A/dz, Γ = c_A, δ = D_AB. In each, the flux is the amount of property crossing unit area per unit time, the gradient is the driving force and the diffusivity (m²/s) measures how readily molecules carry the property. Differences: momentum is a vector, so its flux is a tensor; mass transfer can induce bulk flow; heat flux is a vector of a scalar property.

Derive the flux of A diffusing through stagnant B and compare with equimolar counter-diffusion. (10 marks)

Show the model answer

Fick’s law with bulk flow: N_A = −cD_AB dy_A/dz + y_A(N_A + N_B). Stagnant B: N_B = 0 ⇒ N_A(1 − y_A) = −cD_AB dy_A/dz. N_A is constant at steady state: N_A ∫dz = −cD_AB ∫dy_A/(1 − y_A) ⇒ N_A = (cD_AB/z) ln[(1 − y_A2)/(1 − y_A1)] = (D_ABP/RTz) ln[(P − p_A2)/(P − p_A1)]. With p_BM = (p_B2 − p_B1)/ln(p_B2/p_B1): N_A = D_ABP(p_A1 − p_A2)/(RTz p_BM). Equimolar: N_A = −N_B so the bulk term vanishes: N_A = D_AB(p_A1 − p_A2)/(RTz). Ratio = P/p_BM > 1; important when A is concentrated. Profiles: linear for equimolar, logarithmic (1 − y_A varies exponentially) for stagnant B.

General property balance

Topics: Balance concept: input, output, generation, accumulation; differential form; one-directional balance including molecular and convective transport; three-dimensional balance; equation of continuity; general property balance for an incompressible fluid.

Input − output + generation = accumulation, made local

Every conservation law has the form rate in − rate out + rate of generation = rate of accumulation. Applied to a small cube Δx Δy Δz fixed in space, with flux ψ of a property and generation ψ_G per unit volume, and letting the cube shrink to a point, it becomes ∂Γ/∂t + ∇·ψ = ψ_G. This is the general property balance: it holds for mass, energy and momentum alike.

The total flux has a molecular part and a convective part: ψ_total = −δ∇Γ + Γv. Substituting: ∂Γ/∂t + v·∇Γ + Γ(∇·v) = δ∇²Γ + ψ_G (for constant δ). For an incompressible fluid ∇·v = 0, so DΓ/Dt = ∂Γ/∂t + v·∇Γ = δ∇²Γ + ψ_G. With Γ = c_A this is the convective diffusion equation; with Γ = ρc_pT it is the energy equation; with Γ = ρv (a vector) and generation from pressure and gravity it is the Navier–Stokes equation.

For the total mass, Γ = ρ, there is no molecular flux and no generation: ∂ρ/∂t + ∇·(ρv) = 0, the equation of continuity. For constant density it reduces to ∇·v = ∂v_x/∂x + ∂v_y/∂y + ∂v_z/∂z = 0: what flows into a point must flow out.

  • ∂Γ/∂t + ∇·ψ = ψ_G
  • ψ = −δ∇Γ + Γv
  • Incompressible: DΓ/Dt = δ∇²Γ + ψ_G
  • Continuity: ∇·v = 0

Example: A 2-D incompressible flow has v_x = 3x. What must v_y be (v_y = 0 at y = 0)?

  1. Continuity: ∂v_x/∂x + ∂v_y/∂y = 0 ⇒ 3 + ∂v_y/∂y = 0.
  2. Integrate: v_y = −3y + f(x); f = 0 from the boundary condition.

Answer: v_y = −3y (stagnation-point flow).

General property balance on a fixed volume element: accumulation = in − out + generation ⇒ ∂Γ/∂t + ∇·ψ = ψ_G. Total flux = molecular (−δ∇Γ) + convective (Γv). For incompressible fluids ∂Γ/∂t + v·∇Γ = δ∇²Γ + ψ_G (substantial derivative). Continuity: ∂ρ/∂t + ∇·(ρv) = 0, or ∇·v = 0 for constant density. Special cases give the diffusion equation, the energy equation and the Navier–Stokes equation.

  • Fixed (Eulerian) element: in − out + generation = accumulation.
  • Substantial derivative D/Dt follows a fluid particle.
  • Continuity has no molecular term and no generation.
  • Steady state: ∂/∂t = 0.
  • One-dimensional: d/dz(ψ_z) = ψ_G.

Key formulas

  • ∂Γ/∂t + ∇·ψ = ψ_G
  • ∂ρ/∂t + ∇·(ρv) = 0
  • DΓ/Dt = δ∇²Γ + ψ_G

Practice questions

The equation of continuity expresses conservation of

  1. energy
  2. mass
  3. momentum
  4. species A only
Show the answer

Answer: B. mass Total mass.

For an incompressible fluid

  1. ∇·v = 0
  2. ∇×v = 0
  3. v = 0
  4. ∂v/∂t = 0
Show the answer

Answer: A. ∇·v = 0 Divergence-free.

D/Dt is the derivative

  1. at a fixed point
  2. following the fluid
  3. with respect to pressure
  4. at the wall
Show the answer

Answer: B. following the fluid Substantial derivative.

In ∂Γ/∂t + ∇·ψ = ψ_G, ψ_G is

  1. accumulation
  2. generation per volume
  3. flux
  4. diffusivity
Show the answer

Answer: B. generation per volume Source term.

The convective part of the flux is

  1. −δ∇Γ
  2. Γv
  3. ∇²Γ
  4. ψ_G
Show the answer

Answer: B. Γv Property carried by the flow.

Theory questions

Derive the three-dimensional general property balance on a volume element. (10 marks)

Show the model answer

Element Δx Δy Δz fixed in space. In x: in = ψ_x|_x ΔyΔz, out = ψ_x|_(x+Δx) ΔyΔz; similarly y and z. Generation = ψ_G ΔxΔyΔz; accumulation = (∂Γ/∂t)ΔxΔyΔz. Balance and divide by the volume: ∂Γ/∂t = −[(ψ_x|_(x+Δx) − ψ_x|_x)/Δx + …] + ψ_G. Limit Δ → 0: ∂Γ/∂t + ∂ψ_x/∂x + ∂ψ_y/∂y + ∂ψ_z/∂z = ψ_G, i.e. ∂Γ/∂t + ∇·ψ = ψ_G. With ψ = −δ∇Γ + Γv and constant δ: ∂Γ/∂t + ∇·(Γv) = δ∇²Γ + ψ_G. Expanding ∇·(Γv) = v·∇Γ + Γ∇·v and using ∇·v = 0 for incompressible flow gives ∂Γ/∂t + v·∇Γ = δ∇²Γ + ψ_G.

Derive the equation of continuity and state its simplified forms. (5 marks)

Show the model answer

Mass balance on ΔxΔyΔz: accumulation ∂ρ/∂t ΔxΔyΔz = net inflow of ρv_x, ρv_y, ρv_z across the faces. Dividing and taking the limit: ∂ρ/∂t + ∂(ρv_x)/∂x + ∂(ρv_y)/∂y + ∂(ρv_z)/∂z = 0, i.e. ∂ρ/∂t + ∇·(ρv) = 0. Alternative form: Dρ/Dt + ρ∇·v = 0. Steady: ∇·(ρv) = 0. Constant density: ∇·v = 0. Cylindrical coordinates: (1/r)∂(rv_r)/∂r + (1/r)∂v_θ/∂θ + ∂v_z/∂z = 0.

Molecular transport and the general property balance

Topics: Steady one-dimensional transport without generation (constant and variable area); steady transport with constant generation (heat and mass); momentum transfer with generation: laminar flow in a tube (Hagen–Poiseuille) and between parallel plates.

Shell balances: no generation, then generation

Without generation the steady one-dimensional balance is d(Aψ)/dz = 0: the total flow of the property is the same at every section. With constant area (a slab) the flux is constant and the profile is linear: q = k(T₁ − T₂)/L. With variable area the flux changes but the total does not: through a cylinder wall Q = 2πLk(T₁ − T₂)/ln(r₂/r₁); through a sphere Q = 4πk(T₁ − T₂)/(1/r₁ − 1/r₂). The same results hold for diffusion through a pipe wall or a spherical shell.

With constant generation S (Joule heating, nuclear fission, a zero-order reaction), the flux grows with distance from the plane of symmetry. Slab: dq/dx = S ⇒ q = Sx ⇒ T = T₀ + (SL²/2k)(1 − x²/L²). Cylinder: (1/r)d(rq)/dr = S ⇒ q = Sr/2 ⇒ T = T_s + (SR²/4k)(1 − r²/R²). The parabolic profile peaks at the centre.

Momentum has “generation” from the pressure gradient: in steady laminar flow in a tube, a shell balance on a cylinder of radius r and length L gives (ΔP/L)πr² = τ_rz 2πrL ⇒ τ_rz = (ΔP/2L)r. With τ = −μ dv_z/dr and no slip at r = R: v_z = (ΔPR²/4μL)(1 − r²/R²), v_max = 2v_avg, and Q = πΔPR⁴/(8μL) — the Hagen–Poiseuille equation. Between parallel plates 2B apart: v = (ΔPB²/2μL)(1 − y²/B²), v_avg = ⅔v_max.

  • No generation: constant total flow.
  • Cylinder: Q = 2πLkΔT/ln(r₂/r₁).
  • Generation: parabolic profile.
  • Hagen–Poiseuille: Q = πΔPR⁴/(8μL).

Example: Oil (μ = 0.1 Pa·s, ρ = 900 kg/m³) flows through a 10 mm tube 2 m long under 2 kPa. Find Q and check laminar flow.

  1. Q = π × 2000 × (0.005)⁴/(8 × 0.1 × 2) = 2.45 × 10⁻⁶ m³/s.
  2. v_avg = Q/(πR²) = 2.45e-6/7.85e-5 = 0.031 m/s.
  3. Re = ρvD/μ = 900 × 0.031 × 0.01/0.1 = 2.8 ≪ 2100.

Answer: 2.45 mL/s, laminar.

Example: A 2 mm nichrome wire carries 30 A; ρ_e = 1.1 × 10⁻⁶ Ω·m, k = 15 W/m·K. Find the centre-to-surface temperature rise.

  1. A = π(0.001)² = 3.14 × 10⁻⁶ m²; S = I²ρ_e/A² = 900 × 1.1e-6/9.87e-12 = 1.0 × 10⁸ W/m³.
  2. ΔT = SR²/(4k) = 1.0e8 × 1e-6/60 = 1.67 K.

Answer: Only about 1.7 K: the wire is nearly isothermal; convection outside controls.

Steady 1-D transport without generation: constant flux in a slab (linear profile); in a cylinder Q = 2πLkΔT/ln(r₂/r₁), in a sphere Q = 4πkΔT/(1/r₁ − 1/r₂). With constant generation S: slab T − T_s = (SL²/2k)(1 − x²/L²); cylinder T − T_s = (SR²/4k)(1 − r²/R²). Momentum: τ_rz = (ΔP/2L)r; v_z = (ΔPR²/4μL)(1 − r²/R²); Q = πΔPR⁴/(8μL); plates v_avg = ⅔v_max.

  • Shear stress is zero at the centre-line, maximum at the wall.
  • Tube: v_max = 2v_avg. Plates: v_max = 1.5v_avg.
  • Generation makes flux grow linearly from the centre.
  • Log-mean area for cylinders.
  • Same mathematics for heat, mass and momentum.

Key formulas

  • Q = 2πLkΔT/ln(r₂/r₁)
  • T − T_s = (SR²/4k)(1 − r²/R²)
  • Q = πΔPR⁴/(8μL)
  • v_avg = ΔPB²/(3μL) (plates, gap 2B)

Practice questions

In laminar tube flow the shear stress varies

  1. as r²
  2. linearly with r
  3. as 1/r
  4. is constant
Show the answer

Answer: B. linearly with r τ = (ΔP/2L)r.

Hagen–Poiseuille: Q is proportional to

  1. R²
  2. R³
  3. R⁴
  4. R
Show the answer

Answer: C. R⁴ Doubling the radius gives 16 times the flow.

Steady conduction through a cylinder wall without generation: what is constant with r?

  1. flux q
  2. total heat flow Q
  3. temperature gradient
  4. nothing
Show the answer

Answer: B. total heat flow Q Area grows, flux falls.

For flow between plates, v_avg/v_max =

  1. 1/2
  2. 2/3
  3. 3/4
  4. 1
Show the answer

Answer: B. 2/3 Parabola over a slot.

A heated wire’s maximum temperature is at

  1. the surface
  2. the centre
  3. halfway
  4. the ends only
Show the answer

Answer: B. the centre Heat must flow outwards from the centre.

Theory questions

Derive the Hagen–Poiseuille equation by a shell momentum balance. (10 marks)

Show the model answer

Steady, fully developed laminar flow of a Newtonian fluid in a horizontal tube. Shell of radius r, thickness Δr, length L: pressure force P₀2πrΔr − P_L2πrΔr plus momentum flux in at r minus out at r + Δr: (τ_rz2πrL)|_r − (τ_rz2πrL)|_(r+Δr) = 0 net. Dividing by 2πLΔr and Δr → 0: d(rτ_rz)/dr = (ΔP/L)r ⇒ τ_rz = (ΔP/2L)r + C₁/r; C₁ = 0 for finite stress at r = 0. Newton: τ_rz = −μ dv_z/dr ⇒ v_z = −(ΔP/4μL)r² + C₂; no slip v_z(R) = 0 ⇒ v_z = (ΔPR²/4μL)(1 − r²/R²). Flow: Q = ∫₀ᴿ v_z2πr dr = πΔPR⁴/(8μL). v_avg = ΔPR²/(8μL) = v_max/2. Valid for Re < 2100 and away from the entrance.

Derive the temperature profile in a cylindrical wire with uniform heat generation and convection at the surface. (10 marks)

Show the model answer

Shell 2πrLΔr: heat in by conduction at r + generation S2πrLΔr = heat out at r + Δr ⇒ d(rq_r)/dr = Sr ⇒ q_r = Sr/2 (finite at r = 0). Fourier: −k dT/dr = Sr/2 ⇒ T = −Sr²/(4k) + C. At r = R: T = T_s ⇒ T − T_s = (SR²/4k)(1 − r²/R²). T_max = T_s + SR²/(4k). Surface: q_R = SR/2 = h(T_s − T∞) ⇒ T_s = T∞ + SR/(2h). Total heat per length = SπR², which equals 2πRh(T_s − T∞). For an electric wire S = I²ρ_e/(πR²)². The same analysis applies to a cylindrical catalyst pellet with a zero-order exothermic reaction.

Transport with net convective flux

Topics: Convective flux caused by forced convection; relation between shear stress and shear rate; Navier–Stokes equation; Fick’s law with convection.

Navier–Stokes and convective diffusion

When fluid moves, it carries momentum, energy and species with it. The general property balance with Γ = ρv and with pressure and gravity as “generation” gives, for an incompressible Newtonian fluid, ρ(∂v/∂t + v·∇v) = −∇P + μ∇²v + ρg — the Navier–Stokes equation. The left side is mass × acceleration of a fluid particle; the right side is the pressure force, the net viscous force and gravity. With continuity ∇·v = 0 it gives four equations for v_x, v_y, v_z and P.

The link between stress and motion is the constitutive equation. For a Newtonian fluid the shear stress is proportional to the rate of shear: τ_yx = −μ dv_x/dy (Brodkey–Hershey sign convention: momentum flows down the gradient). Non-Newtonian fluids have an apparent viscosity that changes with shear rate: power-law τ = K(dv/dy)ⁿ (n < 1 shear-thinning polymer melts, n > 1 dilatant), Bingham plastics with a yield stress (toothpaste, slurries). Only for Newtonian fluids does the μ∇²v term appear in Navier–Stokes as written.

For species A, Fick’s law relative to fixed axes is N_A = −cD_AB∇x_A + x_A(N_A + N_B): diffusion plus convection with the molar average velocity. Inserting this into the species balance for constant c and D gives ∂c_A/∂t + v*·∇c_A = D_AB∇²c_A + R_A, the convective diffusion equation used for absorption into falling films, mass transfer from spheres and catalytic reactors. Exact solutions exist only for simple flows; others lead to correlations of Sh with Re and Sc.

  • ρDv/Dt = −∇P + μ∇²v + ρg
  • Newtonian: τ = −μ dv/dy
  • Power law: τ = K(dv/dy)ⁿ
  • Convective diffusion: Dc_A/Dt = D∇²c_A + R_A

Example: Use Navier–Stokes to find the velocity in steady laminar flow between two fixed horizontal plates 2B apart.

  1. Assume v = v_x(y) only, steady, fully developed: v·∇v = 0 and ∂/∂t = 0.
  2. x-component: 0 = −dP/dx + μ d²v_x/dy².
  3. Integrate twice with v_x(±B) = 0: v_x = (−dP/dx)(B²/2μ)(1 − y²/B²).

Answer: The same parabola as the shell balance, obtained directly from the general equation.

Example: Gas absorption into a falling film for a short contact time: show that the average mass-transfer coefficient is k_L = 2√(D/πt).

  1. Near the surface the film moves at v_max, so ∂c/∂t = D ∂²c/∂y² with t = z/v_max (penetration).
  2. Solution: (c − c₀)/(c_s − c₀) = erfc(y/2√(Dt)); surface flux N = (c_s − c₀)√(D/πt).
  3. Average over exposure t_e: k_L = (1/t_e)∫√(D/πt)dt = 2√(D/πt_e).

Answer: Higbie’s penetration theory: k_L ∝ √D.

Moving fluid carries properties by convection. Navier–Stokes (incompressible, Newtonian): ρ(∂v/∂t + v·∇v) = −∇P + μ∇²v + ρg, with continuity ∇·v = 0. Newtonian fluids have τ ∝ shear rate; power-law, Bingham and other non-Newtonian fluids do not. Fick with convection: N_A = −cD_AB∇x_A + x_A(N_A + N_B) ⇒ convective diffusion equation ∂c_A/∂t + v·∇c_A = D_AB∇²c_A + R_A. Simple solutions: plate and tube flows, falling films, penetration theory.

  • Navier–Stokes = Newton’s second law for a fluid particle.
  • Euler equation: Navier–Stokes with μ = 0.
  • Bernoulli: Euler integrated along a streamline.
  • Shear-thinning: apparent viscosity falls with shear rate.
  • Penetration theory: k_L = 2√(D/πt).

Key formulas

  • ρDv/Dt = −∇P + μ∇²v + ρg
  • τ_yx = −μ dv_x/dy
  • N_A = −cD_AB∇x_A + x_A(N_A + N_B)
  • k_L = 2√(D/πt_e)

Practice questions

The Navier–Stokes equation is a statement of

  1. mass conservation
  2. Newton’s second law for a fluid
  3. energy conservation
  4. species conservation
Show the answer

Answer: B. Newton’s second law for a fluid Momentum balance.

The Euler equation is Navier–Stokes with

  1. ρ = 0
  2. μ = 0
  3. g = 0
  4. P = 0
Show the answer

Answer: B. μ = 0 Inviscid flow.

A shear-thinning fluid has power-law index

  1. n = 1
  2. n < 1
  3. n > 1
  4. n = 0
Show the answer

Answer: B. n < 1 Polymer melts, ketchup.

In penetration theory k_L is proportional to

  1. D
  2. √D
  3. D²
  4. D^(2/3)
Show the answer

Answer: B. √D Unsteady diffusion.

A Bingham plastic

  1. flows at any stress
  2. needs a yield stress before flowing
  3. has zero viscosity
  4. is always Newtonian
Show the answer

Answer: B. needs a yield stress before flowing Toothpaste.

Theory questions

State the Navier–Stokes equation, explain each term and simplify it for steady laminar flow in a pipe. (10 marks)

Show the model answer

ρ(∂v/∂t + v·∇v) = −∇P + μ∇²v + ρg. Terms: local acceleration ∂v/∂t; convective acceleration v·∇v (non-linear); pressure force per volume −∇P; viscous force per volume μ∇²v (Newtonian, constant μ, incompressible); body force ρg. Pipe flow in cylindrical coordinates, steady, fully developed v = v_z(r): ∂/∂t = 0, v·∇v = 0 (v_z does not change with z), so 0 = −dP/dz + μ(1/r)d/dr(r dv_z/dr). Integrating with v_z finite at r = 0 and v_z(R) = 0: v_z = (−dP/dz)(R²/4μ)(1 − r²/R²), leading to Hagen–Poiseuille.

Write Fick’s law including convection and derive the convective diffusion equation. (5 marks)

Show the model answer

Relative to stationary axes the molar flux of A is the diffusion flux plus the amount carried by the molar average velocity: N_A = J_A* + c_Av* = −cD_AB∇x_A + x_A(N_A + N_B). Species balance on a fixed element: ∂c_A/∂t + ∇·N_A = R_A. Substituting with constant c and D_AB: ∂c_A/∂t + v*·∇c_A = D_AB∇²c_A + R_A (using ∇·v* = 0 for constant c). For no flow it reduces to Fick’s second law ∂c_A/∂t = D_AB∇²c_A; for steady state without reaction, v·∇c_A = D∇²c_A, used for mass transfer in laminar films and boundary layers.

Notes, examples and questions were written for this studio; the prescribed books are listed in the studio for reference.

Frequently asked questions

What is the Transport Phenomena Studio?

Momentum, heat and mass — one balance. The molecular transport analogy, general property balance and continuity, shell balances with and without generation, Hagen–Poiseuille and plate flows, diffusion through stagnant films, Navier–Stokes and convective diffusion from the ASTU CHE181801 syllabus (Brodkey–Hershey, 2018-19 scheme).

What can I do in the Transport Phenomena Studio?

Newton, Fourier and Fick in one form; General property balance and continuity; Shell balances with generation; Navier–Stokes and convective diffusion.

Is the Transport Phenomena Studio free?

Yes. It is free and runs in your browser with no sign-up.

Open the interactive studio →