IITIAN1997 STUDIO

Nanomaterials

Why small is different.

Open the interactive studio →

Classification and size effects, quantum dots, carbon dots, nanotubes and metal oxides, nanotechnology in polymers, ceramics, fibres and metals, XRD, SEM, TEM, AFM, UV–Vis and Delsa Nano characterisation, and applications from the ASTU CHE1817PE32 syllabus (2018-19 scheme).

What is inside

  • Size and quantum effects
  • Quantum dots, carbon dots and nanotubes
  • XRD, electron microscopy, AFM, DLS and zeta potential
  • Sensors, catalysts, water treatment and consumer uses

Syllabus: ASTU CHE1817PE32 Nanomaterials, semester 7, 2018-19 scheme (programme elective 3). Official syllabus PDF.

Fundamentals of nanomaterials

Topics: Historical development; classification; size and scale; structure and bonding in nanomaterials; basics of fabrication methods; preparation; safety, handling and storage issues.

Small is different

A nanomaterial has at least one dimension between about 1 and 100 nm. History: Roman Lycurgus cup and medieval stained glass (gold and silver nanoparticles), Faraday’s gold colloids (1857), Feynman’s “There’s plenty of room at the bottom” (1959), Taniguchi’s term “nanotechnology” (1974), scanning tunnelling microscope (1981) and AFM (1986), fullerene C₆₀ (1985), carbon nanotubes (Iijima, 1991), quantum dots (Brus, Ekimov, 1980s), graphene (2004). India’s Nano Mission dates from 2007.

Classification by dimensionality: 0-D (all dimensions nanoscale: nanoparticles, quantum dots, fullerenes), 1-D (one dimension long: nanotubes, nanowires, nanorods, nanofibres), 2-D (sheets: graphene, MoS₂, thin films, nanoclay platelets), 3-D (bulk materials built of nanoscale units: nanocrystalline metals, nanocomposites, aerogels, MOFs). By composition: carbon-based, metal and metal oxide, semiconductor, polymeric and bio-based, composite. Two effects make nano different: surface effects (a large fraction of atoms at the surface — about 30 % for a 5 nm particle — with fewer neighbours, so higher energy, lower melting point, higher reactivity) and quantum effects (confinement of electrons when size approaches the de Broglie wavelength or exciton radius, changing band gaps, colour and conductivity). Bonding is the same (metallic, covalent, ionic, van der Waals), but surface atoms are under-coordinated and surfaces reconstruct.

Fabrication: top-down (breaking bulk down — ball milling, lithography, etching, laser ablation) and bottom-up (building from atoms and molecules — chemical vapour deposition, sol–gel, chemical reduction and co-precipitation, hydrothermal and solvothermal synthesis, microemulsions, self-assembly, green synthesis with plant extracts). Safety: nanoparticles can be inhaled (deep lung deposition), cross membranes and generate reactive oxygen species; CNTs resemble asbestos fibres in some studies; fine powders can be explosive. Handle in fume hoods or gloveboxes with HEPA filtration, use nitrile gloves and P100/N95 respirators, keep materials wet or in suspension, store in sealed labelled containers away from ignition, and dispose as hazardous waste.

  • 1–100 nm in at least one dimension.
  • 0-D, 1-D, 2-D, 3-D nanostructures.
  • Surface and quantum effects.
  • Top-down vs bottom-up; safe handling with HEPA and PPE.

Example: Compare the specific surface area of 10 µm and 10 nm silica spheres (ρ = 2200 kg/m³).

  1. SSA = 6/(ρd).
  2. 10 µm: 6/(2200 × 10⁻⁵) = 273 m²/kg = 0.27 m²/g.
  3. 10 nm: 6/(2200 × 10⁻⁸) = 2.73 × 10⁵ m²/kg = 273 m²/g.

Answer: A thousand times more area per gram at 10 nm.

Nanomaterials: 1–100 nm in at least one dimension. History from Lycurgus cup and Faraday’s gold to Feynman, STM/AFM, C₆₀, CNTs, quantum dots and graphene. Classification 0-D, 1-D, 2-D, 3-D and by composition. Surface effects (high surface fraction, lower melting point, higher reactivity) and quantum confinement change properties. Fabrication top-down (milling, lithography, ablation) and bottom-up (CVD, sol–gel, reduction, hydrothermal, self-assembly, green synthesis). Safety: inhalation and toxicity, dust explosions; fume hoods, HEPA, PPE, wet handling, sealed storage, hazardous-waste disposal.

  • 1 nm = 10⁻⁹ m ≈ 4 gold atoms across.
  • SSA = 6/(ρd) for spheres.
  • Gold nanoparticles look red, not gold.
  • Melting point falls for small particles.
  • Nano-powders can be pyrophoric.

Key formulas

  • SSA = 6/(ρd)
  • f_surface ≈ 1 − ((d − 2a)/d)³
  • N ≈ 0.74(d/a)³

Practice questions

Graphene is a

  1. 0-D
  2. 1-D
  3. 2-D
  4. 3-D
Show the answer

Answer: C. 2-D Single atomic sheet.

Who first described the idea of manipulating atoms in 1959?

  1. Faraday
  2. Feynman
  3. Iijima
  4. Taniguchi
Show the answer

Answer: B. Feynman “Plenty of room at the bottom”.

Carbon nanotubes were reported by Iijima in

  1. 1959
  2. 1985
  3. 1991
  4. 2004
Show the answer

Answer: C. 1991 Multi-walled CNTs.

Sol–gel synthesis is

  1. top-down
  2. bottom-up
  3. lithography
  4. milling
Show the answer

Answer: B. bottom-up From molecular precursors.

The main route of occupational nano exposure is

  1. ingestion
  2. inhalation
  3. eye contact only
  4. none
Show the answer

Answer: B. inhalation Airborne particles.

Theory questions

Compare top-down and bottom-up approaches to nanofabrication. (5 marks)

Show the model answer

Top-down: start with bulk material and reduce it to the nanoscale by physical or chemical removal — mechanical milling, lithography (photo, electron-beam, nanoimprint), etching, laser ablation, machining. Advantages: suitable for large quantities (milling) and for patterned devices (lithography in microelectronics); disadvantages: surface defects and contamination, broad size distributions, high cost of lithography, limited to ~10 nm. Bottom-up: build structures atom by atom or molecule by molecule through chemical reactions and self-assembly — chemical vapour deposition, sol–gel, chemical reduction, co-precipitation, hydrothermal synthesis, microemulsions, molecular self-assembly, biological (green) synthesis. Advantages: fewer defects, narrow size distribution, control of shape and composition, lower cost; disadvantages: scale-up and purity challenges, agglomeration. Many processes combine both.

Classify nanomaterials and explain why their properties differ from bulk materials. (10 marks)

Show the model answer

Classification by dimensionality (Siegel): 0-D — all three dimensions < 100 nm: nanoparticles, nanoclusters, quantum dots, fullerenes; 1-D — two dimensions nanoscale: nanotubes, nanowires, nanorods, nanofibres; 2-D — one dimension nanoscale: graphene, nanosheets, thin films and coatings, nanoclay; 3-D — bulk materials with nanoscale structure: nanocrystalline metals and ceramics, nanocomposites, nanoporous materials (zeolites, MOFs, aerogels). By composition: carbon-based, inorganic (metal, metal oxide, semiconductor), organic (polymeric, dendrimers, liposomes), bio-based (nanocellulose, chitosan), hybrids. Why different: (1) surface-to-volume ratio grows as 1/d — surface atoms have unsatisfied bonds and high energy, giving higher catalytic activity, lower melting point (gold 2 nm melts several hundred K lower), higher solubility, and stronger adsorption; (2) quantum confinement — when size is comparable to the electron wavelength or exciton Bohr radius, continuous bands split into discrete levels; band gap widens (colour tunable in quantum dots), metals can become semiconducting; (3) surface plasmon resonance in metal nanoparticles (colour); (4) superparamagnetism in small magnetic particles; (5) mechanical strength increases (Hall–Petch) down to ~10 nm grains; (6) few defects in small crystals.

Types of nanostructures and properties of nanomaterials

Topics: One-, two- and three-dimensional nanostructured materials; thermal, magnetic, optical, electrical and mechanical properties; quantum dots, carbon dots, carbon nanotubes, metal oxides, nanomaterials from bio-based sources, nanocomposites.

Properties that change with size

Thermal: melting point falls as 1/d (Gibbs–Thomson, gold 2 nm melts ~300 K lower), thermal conductivity of nanostructured solids falls because of phonon scattering at boundaries (useful for thermoelectrics), while CNTs and graphene have very high in-plane conductivity (~3000–5000 W/mK). Magnetic: below a critical size (~10–20 nm for iron oxide) particles are single-domain and become superparamagnetic — magnetised in a field but with no remanence — used in MRI contrast agents, ferrofluids and magnetic separation. Optical: metal nanoparticles show surface plasmon resonance (gold ~520 nm, red; silver ~400 nm, yellow), semiconductor quantum dots show size-tunable emission. Electrical: quantised conductance in nanowires, single-electron tunnelling, metallic or semiconducting CNTs. Mechanical: Hall–Petch strengthening with grain refinement (reverses below ~10–20 nm), CNTs with modulus ~1 TPa and strength ~100 GPa.

Quantum dots (CdSe, CdTe, InP, PbS, perovskites; 2–10 nm) are semiconductor crystals smaller than their exciton Bohr radius; the Brus equation E = E_g + (ħ²π²/2R²)(1/m_e* + 1/m_h*) − 1.8e²/(4πεε₀R) predicts the gap. Core–shell dots (CdSe/ZnS) improve brightness and stability. Uses: QLED displays, bio-imaging, solar cells. Carbon dots (< 10 nm, made from citric acid, urea or biomass by hydrothermal or microwave routes) are fluorescent, water-soluble and low-toxicity — sensing and bio-imaging.

Carbon nanotubes are rolled graphene sheets: single-walled (SWCNT, ~1 nm) or multi-walled. The chiral vector (n, m) fixes diameter d = 0.246√(n² + nm + m²)/π nm and electronic type (metallic if (n − m) is divisible by 3). Made by arc discharge, laser ablation or catalytic CVD. Metal oxide nanoparticles: TiO₂ (photocatalysis, sunscreen), ZnO (UV, antibacterial), Fe₃O₄ (magnetic), SiO₂, CeO₂ (catalysis), Al₂O₃. Bio-based nanomaterials: nanocellulose (cellulose nanocrystals and nanofibrils), chitosan nanoparticles, lignin nanoparticles, green-synthesised silver from plant extracts. Nanocomposites: polymer, ceramic and metal matrices with nanofillers.

  • Lower melting point; superparamagnetism.
  • Plasmon colours of Au and Ag.
  • Brus equation for quantum dots.
  • CNT (n, m): diameter and metallic rule.

Example: Estimate the band gap of a 4 nm CdSe dot (E_g = 1.74 eV, m_e* = 0.13, m_h* = 0.45, ε_r = 10.6).

  1. Confinement: (ħ²π²/2R²)(1/m_e + 1/m_h) with R = 2 nm ⇒ about 0.93 eV.
  2. Coulomb: 1.8e²/(4πεε₀R) ⇒ about 0.12 eV.
  3. E = 1.74 + 0.93 − 0.12 = 2.55 eV ⇒ λ = 1240/2.55 ≈ 486 nm.

Answer: About 2.55 eV (blue-green); the simple model overestimates the shift (measured ≈ 2.2 eV).

Example: Find the diameter and type of a (10, 0) nanotube.

  1. d = 0.246 × √(100)/π = 0.783 nm.
  2. (n − m) = 10, not divisible by 3 ⇒ semiconducting; zigzag (m = 0).

Answer: 0.78 nm zigzag, semiconducting.

Thermal: melting point depression, low conductivity in nanostructured solids, very high in CNTs/graphene. Magnetic: single-domain superparamagnetism. Optical: surface plasmon resonance (Au 520 nm), size-tunable QD emission. Electrical: quantised conductance, metallic/semiconducting CNTs. Mechanical: Hall–Petch, CNT modulus ~1 TPa. Quantum dots (Brus equation, core–shell), carbon dots, CNTs (chirality (n, m), d = 0.246√(n² + nm + m²)/π, arc/laser/CVD), metal oxides (TiO₂, ZnO, Fe₃O₄, CeO₂), bio-based (nanocellulose, chitosan, green Ag), nanocomposites.

  • Exciton Bohr radius of CdSe ≈ 5 nm.
  • Armchair CNTs are metallic.
  • Superparamagnetic Fe₃O₄ in MRI.
  • Carbon dots are low-toxicity alternatives to Cd QDs.
  • Inverse Hall–Petch below ~10 nm grains.

Key formulas

  • E = E_g + (ħ²π²/2R²)(1/m_e* + 1/m_h*) − 1.8e²/(4πεε₀R)
  • d_CNT = 0.246√(n² + nm + m²)/π nm
  • σ_y = σ₀ + k/√d (Hall–Petch)
  • T_m(d) = T_m,bulk(1 − α/d)

Practice questions

Smaller CdSe quantum dots emit light that is

  1. redder
  2. bluer
  3. the same
  4. infrared only
Show the answer

Answer: B. bluer Larger gap.

Gold nanoparticles in water usually appear

  1. gold
  2. red
  3. blue
  4. colourless
Show the answer

Answer: B. red Plasmon at ~520 nm.

Superparamagnetic particles show

  1. large remanence
  2. no remanence
  3. no response to field
  4. ferroelectricity
Show the answer

Answer: B. no remanence Thermal flipping.

A (12, 6) nanotube is

  1. metallic
  2. semiconducting
  3. insulating
  4. superconducting
Show the answer

Answer: A. metallic 12 − 6 = 6 divisible by 3.

Carbon dots are commonly made by

  1. arc discharge
  2. hydrothermal treatment of citric acid or biomass
  3. ball milling of diamond
  4. electroplating
Show the answer

Answer: B. hydrothermal treatment of citric acid or biomass Bottom-up.

Theory questions

Describe the synthesis and properties of carbon nanotubes. (5 marks)

Show the model answer

Synthesis: arc discharge between graphite electrodes in helium (with metal catalyst for SWCNTs); laser ablation of a graphite–metal target in a hot furnace; catalytic chemical vapour deposition (hydrocarbon such as CH₄, C₂H₂ or CO decomposed on Fe, Co or Ni nanoparticles at 600–1200 °C) — the most scalable, allows aligned growth. Purification removes amorphous carbon and catalyst (acid treatment, oxidation). Properties: diameter ~1 nm (SWCNT) to tens of nm (MWCNT), lengths up to cm; Young’s modulus ~1 TPa, tensile strength up to ~100 GPa; electrical behaviour metallic or semiconducting according to chirality; ballistic conduction and current density ~10⁹ A/cm²; thermal conductivity ~3000 W/mK along the axis; high surface area. Applications: composites, conductive films, field emitters, sensors, batteries and supercapacitors.

Explain quantum confinement and its effect on the optical properties of quantum dots. (10 marks)

Show the model answer

In a bulk semiconductor, electron states form continuous bands separated by the band gap E_g; an exciton (bound electron–hole pair) has a natural size, the Bohr radius a_B = εr(m₀/μ)a₀ (CdSe ≈ 5.6 nm). When the crystal radius R is comparable to or smaller than a_B, the carriers are confined like particles in a box: their kinetic energy rises as ħ²π²/(2μR²) and the energy levels become discrete. The effective band gap rises (Brus equation: E = E_g + ħ²π²/(2R²)(1/m_e* + 1/m_h*) − 1.8e²/(4πεε₀R)). Consequences: absorption edge and emission shift to shorter wavelength (blue shift) as size decreases — CdSe dots emit from red (~6 nm) to blue (~2 nm); narrow emission peaks if size distribution is narrow; high quantum yield with core–shell passivation (ZnS); broad absorption. Applications: QLED displays with pure colours, biological labelling (multiplexed imaging), solar cells (multiple-exciton generation), LEDs, lasers and photodetectors. Regimes: strong confinement (R < a_B), weak (R > a_B).

Nanotechnology in different materials

Topics: Introduction; nanotechnology in polymers, ceramics, fibres and metals; techniques of fabrication.

Nano inside everyday materials

Polymers: nanocomposites with nanoclay (barrier, flame retardancy), CNTs and graphene (conductivity, strength), nano-silica (tyre treads with lower rolling resistance), nano-ZnO and TiO₂ (UV stability), silver (antimicrobial surfaces). Fabrication: in-situ polymerisation, solution blending, melt compounding in twin-screw extruders, layer-by-layer assembly. Ceramics: nanocrystalline zirconia and alumina (tougher, can be superplastic), nano-TiO₂ self-cleaning coatings, transparent ceramics; nanopowders sinter at lower temperatures because of high surface energy; techniques — sol–gel, combustion synthesis, spark plasma sintering, hot isostatic pressing.

Fibres: electrospinning draws a polymer solution in a high electric field (10–30 kV) into a jet that whips and thins to fibres of 50–500 nm, collected as non-woven mats with high porosity and area — filtration media, wound dressings, tissue-engineering scaffolds, battery separators. Nanofinishes on textiles give water and stain repellence (nano-silica, fluorinated coatings — lotus effect), UV protection, antimicrobial and wrinkle resistance. Carbon nanofibres and CNT yarns are strong and conductive.

Metals: nanocrystalline metals made by severe plastic deformation (equal-channel angular pressing, high-pressure torsion), electrodeposition, mechanical alloying and consolidation, or rapid solidification are much stronger (Hall–Petch); oxide-dispersion-strengthened steels with nano-oxide particles resist creep; nanoparticle catalysts (Pt on carbon in fuel cells, Pd, Au on oxides); nanostructured coatings by PVD and CVD for wear and corrosion resistance. Common fabrication tools across materials: physical vapour deposition (evaporation, sputtering), chemical vapour deposition, atomic layer deposition (one atomic layer per cycle), lithography (photo, electron-beam, nanoimprint), ball milling, laser ablation, spray pyrolysis, flame synthesis (fumed silica, TiO₂ at million-tonne scale).

  • Polymer nanocomposites: clay, CNT, silica, Ag.
  • Ceramics: sol–gel, spark plasma sintering.
  • Fibres: electrospinning, nano-finishes.
  • Metals: SPD, ODS steels, Pt catalysts; PVD, CVD, ALD.

Example: Electrospun fibres of 200 nm diameter form a mat of 10 g/m² (polymer density 1200 kg/m³). Estimate the fibre surface area per m² of mat.

  1. Fibre volume = 0.010/1200 = 8.33 × 10⁻⁶ m³ per m².
  2. Area per volume of a cylinder = 4/d = 4/(2 × 10⁻⁷) = 2 × 10⁷ m⁻¹.
  3. Area = 8.33e-6 × 2e7 = 167 m² per m² of mat.

Answer: About 167 m² of fibre surface per m² — why nanofibre filters are so effective.

Polymers: nanocomposites (clay, CNT, graphene, silica, metal oxides, Ag) by in-situ polymerisation, solution and melt mixing. Ceramics: nanocrystalline toughened oxides, lower sintering temperatures, sol–gel and spark plasma sintering, self-cleaning TiO₂. Fibres: electrospinning (50–500 nm), nano-finishes for repellence, UV and antimicrobial properties. Metals: nanocrystalline metals by severe plastic deformation and electrodeposition, ODS steels, nanoparticle catalysts, nanostructured coatings. Fabrication: PVD, CVD, ALD, lithography, ball milling, laser ablation, spray and flame synthesis.

  • Fumed silica and TiO₂ are made by flame synthesis.
  • ALD gives atomic-level thickness control.
  • Lotus effect: rough hydrophobic nanosurface.
  • Spark plasma sintering keeps grains small.
  • Nano-silica tyres: lower rolling resistance.

Key formulas

  • area/volume of fibre = 4/d
  • SSA of sphere = 6/(ρd)

Practice questions

Electrospinning produces

  1. quantum dots
  2. nanofibres
  3. nanotubes by arc
  4. thin oxide films only
Show the answer

Answer: B. nanofibres Electrostatic drawing.

ALD stands for

  1. atomic layer deposition
  2. aligned laser deposition
  3. acid leaching digestion
  4. none
Show the answer

Answer: A. atomic layer deposition Self-limiting layers.

Nanopowders sinter at lower temperature because of

  1. low surface energy
  2. high surface energy
  3. magnetism
  4. colour
Show the answer

Answer: B. high surface energy Driving force.

Severe plastic deformation makes

  1. amorphous polymers
  2. nanocrystalline metals
  3. quantum dots
  4. nanoclay
Show the answer

Answer: B. nanocrystalline metals Grain refinement.

The lotus effect gives

  1. conductivity
  2. water repellence and self-cleaning
  3. magnetism
  4. transparency
Show the answer

Answer: B. water repellence and self-cleaning Superhydrophobic.

Theory questions

Explain chemical vapour deposition for nanomaterials. (5 marks)

Show the model answer

In CVD, volatile precursors (e.g. CH₄ for carbon, SiH₄ for silicon, metal–organic compounds for oxides) are carried by a gas into a heated reactor where they decompose or react on a substrate or catalyst surface, depositing a solid film or nanostructure; by-products are removed with the gas. Variants: thermal CVD, plasma-enhanced CVD (lower temperature), metal–organic CVD, catalytic CVD for CNTs and graphene (on copper foil), atomic layer deposition (sequential self-limiting reactions giving one atomic layer per cycle). Control parameters: temperature, pressure, precursor flow and ratio, substrate and catalyst. Advantages: high purity, uniform and conformal coatings, controlled thickness and composition, scalability; disadvantages: toxic or expensive precursors, high temperatures and vacuum equipment.

Discuss the use of nanotechnology in polymers, ceramics, fibres and metals. (10 marks)

Show the model answer

Polymers: nanofillers at 1–5 wt % raise modulus, HDT, barrier and flame resistance (nanoclay), electrical and thermal conductivity (CNT, graphene), UV resistance (ZnO, TiO₂), antimicrobial activity (Ag); made by in-situ polymerisation, solution blending, melt compounding; uses in packaging, automotive parts, antistatic housings, tyres. Ceramics: nanocrystalline oxides are tougher and can be superplastic; nanopowders sinter at lower temperature; transparent and bioceramics (nano-hydroxyapatite for bone); photocatalytic self-cleaning TiO₂ glass; methods sol–gel, combustion synthesis, hydrothermal, spark plasma sintering. Fibres: electrospun nanofibres for filtration, scaffolds, sensors, battery separators; textile nano-finishes for water/oil repellence, UV protection, odour control; CNT and carbon nanofibres for high-performance composites. Metals: nanocrystalline metals with high hardness and strength (Hall–Petch), ODS alloys for high-temperature creep resistance, nanostructured wear and corrosion coatings by PVD/CVD/electrodeposition, supported nanoparticle catalysts (Pt fuel cells, Au oxidation catalysts, automotive converters). Challenges: dispersion, cost, scale-up, health and environmental safety.

Characterisation tools for nanomaterials

Topics: X-ray diffraction (XRD); scanning electron microscopy; transmission electron microscopy; atomic force microscopy; UV/visible spectroscopy; Delsa Nano (light scattering and zeta potential).

Seeing and measuring the nanoscale

XRD: X-rays (Cu Kα, λ = 0.15406 nm) diffract from crystal planes when Bragg’s law nλ = 2d sin θ holds. The pattern identifies phases (compared with ICDD/JCPDS cards), lattice parameters and crystallinity. Peak broadening gives crystallite size by the Scherrer equation τ = Kλ/(β cos θ), with K ≈ 0.9 and β the corrected FWHM in radians; the Williamson–Hall plot (β cos θ vs 4 sin θ) separates size and strain. Valid for crystallites below ~100–200 nm.

Electron microscopy uses electrons whose wavelength (~0.004 nm at 100 kV) is far shorter than light. SEM scans a focused beam over the surface; secondary electrons give topography, backscattered electrons give composition contrast; resolution ~1–10 nm (FESEM); EDX gives elemental analysis; samples must be conductive or coated with gold or carbon. TEM transmits electrons through very thin samples (< 100 nm, nanoparticles dispersed on a carbon-coated grid); gives size, shape, lattice fringes (HRTEM, resolution ~0.1 nm) and selected-area electron diffraction (rings for polycrystals, spots for single crystals). AFM scans a sharp tip on a cantilever across the surface; laser deflection measures forces; contact, tapping and non-contact modes give 3-D topography with sub-nanometre height resolution in air or liquid, also on non-conductors; roughness and mechanical properties.

UV–Vis spectroscopy measures absorbance (Beer–Lambert A = εcl): plasmon peaks of metal nanoparticles (position and width show size and aggregation), absorption edges of semiconductors and band gaps by Tauc plots ((αhν)ⁿ vs hν; n = 2 direct, ½ indirect). Delsa Nano (Beckman Coulter) and similar instruments use dynamic light scattering: Brownian motion makes scattered intensity fluctuate; the autocorrelation decay gives the diffusion coefficient D and the hydrodynamic diameter d_H = kT/(3πηD) (Stokes–Einstein), with polydispersity index. Electrophoretic light scattering measures particle velocity in an electric field (Doppler shift), giving electrophoretic mobility and zeta potential ζ = μ_eη/(εε₀) (Smoluchowski); |ζ| > 30 mV indicates a stable dispersion.

  • XRD: Bragg phase ID; Scherrer size.
  • SEM surface (+EDX); TEM internal, lattice, SAED.
  • AFM: 3-D topography, any surface.
  • UV–Vis: plasmon, Tauc; DLS size; zeta potential.

Example: A ZnO peak at 2θ = 36.25° has FWHM 0.45° (instrumental 0.10°), Cu Kα. Find the crystallite size and d-spacing.

  1. β = √(0.45² − 0.10²) = 0.439° = 7.66 × 10⁻³ rad; θ = 18.125°, cos θ = 0.950.
  2. τ = 0.9 × 0.15406/(7.66e-3 × 0.950) = 19.0 nm.
  3. d = λ/(2 sin θ) = 0.15406/(2 × 0.311) = 0.2476 nm (ZnO (101)).

Answer: About 19 nm crystallites; d = 0.248 nm.

Example: DLS gives D = 8 µm²/s for particles in water at 25 °C (η = 0.89 mPa·s). Find d_H.

  1. d_H = kT/(3πηD) = 1.381e-23 × 298.15/(3π × 0.00089 × 8e-12).
  2. = 4.117e-21/6.71e-14 = 6.13 × 10⁻⁸ m.

Answer: d_H ≈ 61 nm.

XRD: Bragg nλ = 2d sin θ for phase identification and lattice parameters; Scherrer τ = Kλ/(β cos θ) for crystallite size; Williamson–Hall for strain. SEM: surface morphology (SE, BSE), EDX composition, conductive coating. TEM: size, shape, lattice fringes (HRTEM), SAED. AFM: tip-based 3-D topography in air or liquid, any surface. UV–Vis: Beer–Lambert, plasmon peaks, Tauc band gaps. Delsa Nano/DLS: hydrodynamic size by Stokes–Einstein, PDI; electrophoretic light scattering for zeta potential (Smoluchowski), stability when |ζ| > 30 mV.

  • Scherrer valid below ~100 nm.
  • TEM samples must be electron-transparent.
  • AFM works on insulators without coating.
  • DLS size includes the solvation layer.
  • Plasmon peak red-shifts on aggregation.

Key formulas

  • nλ = 2d sin θ
  • τ = Kλ/(β cos θ)
  • d_H = kT/(3πηD)
  • ζ = μ_eη/(εε₀)
  • (αhν)ⁿ = A(hν − E_g)

Practice questions

The Scherrer equation gives

  1. lattice parameter
  2. crystallite size
  3. zeta potential
  4. band gap
Show the answer

Answer: B. crystallite size From peak width.

Which technique gives lattice fringes directly?

  1. SEM
  2. HRTEM
  3. UV–Vis
  4. DLS
Show the answer

Answer: B. HRTEM Transmission imaging.

AFM measures

  1. electron transmission
  2. tip–surface forces to map topography
  3. X-ray diffraction
  4. light scattering
Show the answer

Answer: B. tip–surface forces to map topography Scanning probe.

DLS measures particle size via

  1. Bragg’s law
  2. Stokes–Einstein from Brownian motion
  3. Beer–Lambert
  4. Scherrer
Show the answer

Answer: B. Stokes–Einstein from Brownian motion Diffusion coefficient.

A zeta potential of −45 mV indicates

  1. unstable dispersion
  2. good electrostatic stability
  3. magnetic particles
  4. no charge
Show the answer

Answer: B. good electrostatic stability |ζ| > 30 mV.

Theory questions

Compare SEM and TEM for characterising nanomaterials. (10 marks)

Show the model answer

Principle: SEM scans a focused electron beam (1–30 kV) over the sample and collects emitted secondary and backscattered electrons; TEM passes a broad beam (80–300 kV) through a thin specimen and images the transmitted electrons with electromagnetic lenses. Information: SEM — surface topography, morphology, particle size and distribution, composition contrast (BSE), elemental analysis (EDX), depth of field large (3-D appearance); TEM — internal structure, size and shape of individual nanoparticles, lattice imaging (HRTEM, ~0.1 nm), crystal structure by SAED, defects, core–shell structures, EELS and EDX. Resolution: SEM ~1–10 nm (FESEM ~1 nm); TEM ~0.1–0.2 nm. Sample preparation: SEM — bulk samples, dried, conductive coating (Au, Pt, C) for insulators; TEM — specimens < 100 nm thick, dispersion on carbon-coated Cu grids, ultramicrotomy or FIB for solids. Vacuum required for both (except environmental SEM). Cost and complexity higher for TEM; statistics from many particles easier in SEM. Often used together with XRD and DLS.

Explain the principle of dynamic light scattering and zeta potential measurement (Delsa Nano). (5 marks)

Show the model answer

DLS: a laser illuminates the dispersion; particles in Brownian motion cause the scattered intensity at a detector to fluctuate; small particles move faster, so fluctuations decay faster. The intensity autocorrelation function g(τ) decays as exp(−2Γτ) with Γ = Dq², q = (4πn/λ)sin(θ/2); fitting (cumulants) gives D and polydispersity; the Stokes–Einstein equation d_H = kT/(3πηD) gives hydrodynamic diameter (includes solvation layer, intensity-weighted, sensitive to aggregates). Zeta potential: an electric field is applied across the cell; charged particles move with electrophoretic velocity; the Doppler shift of scattered light (electrophoretic light scattering) gives mobility μ_e; Smoluchowski ζ = μ_eη/(εε₀) (Hückel for small particles in low-salt media). Interpretation: |ζ| > 30 mV stable, < 15 mV prone to aggregation; isoelectric point found by measuring ζ vs pH.

Applications of nanomaterials

Topics: Nanosensors; nanocatalysts; water treatment and the environment; paints; food and agriculture; cosmetics and consumer goods.

Where nanomaterials are used

Nanosensors exploit the high surface area and size-dependent signals of nanomaterials: gold-nanoparticle colorimetric sensors and lateral-flow tests (pregnancy, COVID antigen), SnO₂ and ZnO nanowire gas sensors (resistance changes on adsorption), CNT and graphene field-effect sensors, glucose sensors with nanostructured electrodes, quantum-dot fluorescent probes, surface-enhanced Raman scattering on silver and gold for trace detection. Nanocatalysts: supported Pt, Pd and Rh nanoparticles in automotive converters and hydrogenation, gold nanoparticles for low-temperature CO oxidation, zeolites and mesoporous silicas, TiO₂ photocatalysis (with UV or doped for visible light), electrocatalysts for fuel cells and water splitting; activity scales with exposed surface and specific facets.

Water and environment: nanofiltration and thin-film nanocomposite RO membranes, nano zero-valent iron for groundwater remediation (reduces chlorinated solvents, removes arsenic and chromium), iron oxide and alumina nanoadsorbents for arsenic and fluoride (relevant in Assam’s groundwater), silver nanoparticles in ceramic filters for disinfection, TiO₂ photocatalytic degradation of dyes and pesticides, CNT and graphene-oxide adsorbents, nanosensors for pollutants. Paints and coatings: nano-TiO₂ self-cleaning and air-purifying, nano-silica scratch resistance, ZnO and CeO₂ UV protection, silver antimicrobial paints, superhydrophobic coatings, nano-zinc corrosion protection.

Food and agriculture: nanoclay and nano-silver packaging (barrier, antimicrobial), nanoencapsulation of nutrients and flavours (liposomes, nanoemulsions), nanosensors for spoilage, nano-fertilisers (IFFCO nano urea and nano DAP in India), nano-pesticide formulations for controlled release, soil-moisture sensors. Cosmetics and consumer goods: TiO₂ and ZnO sunscreens (transparent at nanoscale), liposomes and nanoemulsions in creams, silver in socks and fabrics, CNT-reinforced sports equipment, nano-coated glasses and displays. Concerns: toxicity, environmental release, regulation and labelling; life-cycle and safe-by-design approaches.

  • Sensors: AuNP colorimetry, SnO₂ gas, SERS, QD probes.
  • Catalysts: Pt/Pd/Rh, Au, TiO₂ photocatalysis.
  • Water: nZVI, iron oxide for arsenic, Ag filters, TFN membranes.
  • Paints, food packaging, nano-fertilisers, sunscreens.

Example: A nano-iron-oxide adsorbent holds 20 mg As per g. How much is needed to treat 1000 L/day of water from 0.2 to 0.01 mg/L for a year?

  1. Arsenic removed per day = 1000 × 0.19 = 190 mg.
  2. Per year = 190 × 365 = 69 350 mg.
  3. Adsorbent = 69 350/20 = 3470 g ≈ 3.5 kg.

Answer: About 3.5 kg per year (more in practice because phosphate and silicate compete).

Nanosensors (gold-nanoparticle colorimetric and lateral-flow tests, metal-oxide gas sensors, CNT/graphene FETs, SERS, QD probes); nanocatalysts (supported Pt/Pd/Rh, gold, zeolites, TiO₂ photocatalysis, electrocatalysts); water and environment (TFN membranes, nZVI remediation, iron-oxide arsenic and fluoride removal, silver disinfection, photocatalytic degradation); paints (self-cleaning, scratch-resistant, UV, antimicrobial, superhydrophobic); food and agriculture (nanoclay/Ag packaging, nanoencapsulation, nano urea, controlled-release pesticides); cosmetics and consumer goods (TiO₂/ZnO sunscreens, liposomes, silver textiles). Concerns: toxicity, environmental release, regulation.

  • Lateral-flow strips use gold nanoparticles.
  • nZVI reduces chlorinated solvents.
  • Nano TiO₂/ZnO sunscreens are transparent.
  • IFFCO nano urea is an Indian example.
  • Safe-by-design reduces risk.

Key formulas

  • adsorbent mass = Q(C₀ − C)t/q
  • A = εcl (Beer–Lambert)

Practice questions

Lateral-flow test strips commonly use

  1. CNTs
  2. gold nanoparticles
  3. quantum dots only
  4. nZVI
Show the answer

Answer: B. gold nanoparticles Red colour.

Nano zero-valent iron is used for

  1. sunscreens
  2. groundwater remediation
  3. food flavour
  4. paints only
Show the answer

Answer: B. groundwater remediation Reductive degradation.

TiO₂ nanoparticles in paints give

  1. magnetism
  2. photocatalytic self-cleaning
  3. conductivity
  4. radioactivity
Show the answer

Answer: B. photocatalytic self-cleaning UV-driven oxidation.

Why are nano-ZnO sunscreens transparent?

  1. they absorb visible light
  2. particles are too small to scatter visible light much
  3. they are liquid
  4. they are colourless only in water
Show the answer

Answer: B. particles are too small to scatter visible light much Rayleigh scattering ∝ d⁶.

SERS uses

  1. silver or gold nanostructures to enhance Raman signals
  2. X-rays
  3. magnetic fields
  4. neutrons
Show the answer

Answer: A. silver or gold nanostructures to enhance Raman signals Plasmonic hot spots.

Theory questions

Explain the use of nanomaterials as catalysts. (5 marks)

Show the model answer

Catalytic activity depends on accessible surface atoms; nanoparticles expose a large fraction of their atoms, many at edges, corners and defects that are especially active, so less precious metal is needed. Size and shape also change electronic structure: gold, inert in bulk, becomes an active oxidation catalyst below ~5 nm. Examples: Pt, Pd and Rh nanoparticles on alumina in automotive three-way converters; Pt on carbon in fuel-cell electrodes; Pd for hydrogenation; Ni for steam reforming; nano-zeolites and mesoporous silica supports; TiO₂ photocatalysts for pollutant degradation and water splitting; CeO₂ for oxygen storage; nanostructured electrocatalysts (IrO₂, MoS₂) for hydrogen evolution. Issues: sintering and deactivation at high temperature, leaching, and cost; supports and alloying are used to stabilise particles.

Discuss the applications of nanomaterials in water treatment and the environment. (10 marks)

Show the model answer

Membranes: thin-film nanocomposite RO/NF membranes with zeolite or silica nanoparticles (higher flux), CNT and graphene-oxide membranes, antifouling and antibacterial nano-coatings. Adsorbents: nano-iron oxides, alumina, ceria and titania have high area and affinity for arsenic, fluoride, phosphate and heavy metals; CNTs, graphene oxide and activated nanocarbons for organics and dyes; magnetic nanoadsorbents can be separated with magnets. Reactive nanomaterials: nano zero-valent iron (nZVI) injected into aquifers reduces chlorinated solvents (TCE, PCE), nitrate, Cr(VI) and immobilises arsenic and uranium; bimetallic Fe/Pd faster. Photocatalysis: TiO₂ and ZnO under UV (or doped/visible-light catalysts) generate hydroxyl radicals that mineralise dyes, pesticides, pharmaceuticals and kill microbes. Disinfection: silver nanoparticles in ceramic and cloth filters, copper oxide. Sensing: nanosensors for heavy metals, pathogens and pesticides at trace levels. Air: nano-catalysts in exhaust converters, photocatalytic coatings to oxidise NO_x and VOCs, nanofibre filters for PM2.5. Concerns: release of nanoparticles, toxicity to aquatic life, cost and long-term behaviour; need for life-cycle assessment and recovery of spent materials.

Notes, examples and questions were written for this studio; the prescribed books are listed in the studio for reference.

Frequently asked questions

What is the Nanomaterials Studio?

Why small is different. Classification and size effects, quantum dots, carbon dots, nanotubes and metal oxides, nanotechnology in polymers, ceramics, fibres and metals, XRD, SEM, TEM, AFM, UV–Vis and Delsa Nano characterisation, and applications from the ASTU CHE1817PE32 syllabus (2018-19 scheme).

What can I do in the Nanomaterials Studio?

Size and quantum effects; Quantum dots, carbon dots and nanotubes; XRD, electron microscopy, AFM, DLS and zeta potential; Sensors, catalysts, water treatment and consumer uses.

Is the Nanomaterials Studio free?

Yes. It is free and runs in your browser with no sign-up.

Open the interactive studio →