Particle size analysis, size reduction laws, settling and fluidisation, sedimentation, cyclones and dust collection, filtration and agitation from the ASTU CHE241303 syllabus.
What is inside
- Screen analysis and size reduction
- Settling, Ergun and fluidisation
- Cyclones, filtration and conveying
- Mixing power and scale-up
Syllabus: ASTU CHE241303 Mechanical Operations, semester 3, NEP 2020 (2024-25 onwards). Official syllabus PDF.
Particulate solids
Topics: Characterisation of solid particles: shape, size, sphericity, mixed particle sizes and size analysis; specific surface; average particle size; screen analysis, standard screen series; properties of masses of particles; storage of solids.
Particle size and screen analysis
Particle size is measured by sieving (Tyler or IS sieves), described by mesh number (openings per inch). A 200-mesh Tyler screen has 74 µm openings. Shape is described by sphericity: the surface area of a sphere with the same volume divided by the particle’s actual surface area (1 for a sphere, about 0.81 for a cube).
Screen effectiveness compares the oversize recovered in the overflow and the undersize in the underflow with the ideal separation.
- 200 mesh ≈ 74 µm
- Sphericity ≤ 1 (sphere = 1)
- Cumulative analysis gives the size distribution
Example: Find the sphericity of a cube.
- Sphericity = π^(1/3)(6V)^(2/3)/A; for a cube of edge 1, V = 1, A = 6.
- = π^(1/3) × 6^(2/3) / 6 ≈ 0.806.
Answer: ≈ 0.81
Example: What is the opening of a 200-mesh Tyler screen?
- Standard Tyler value.
- 0.074 mm (74 µm).
Answer: 74 µm
Particles are described by size (sieve opening or equivalent diameter) and shape (sphericity ψ = surface of equal-volume sphere/actual surface; 1 for a sphere, 0.874 for a cube-like crushed solid ≈ 0.6–0.8). Screen analysis gives mass fractions x_i on each screen; from them: specific surface A_w = (6/ψρ) Σ x_i/D̄_i, volume–surface (Sauter) mean D_s = 1/Σ(x_i/D̄_i), mass mean D_w = Σ x_i D̄_i. Tyler series screens step by √2 in opening.
- Sphericity ψ = 6/(D_p × S/V).
- Differential analysis: mass on each screen; cumulative: mass smaller than each size.
- Mesh number = openings per linear inch.
- Bulk solids have an angle of repose; Janssen: pressure in a bin levels off with depth.
Key formulas
- ψ = 6V_p/(D_p S_p)
- A_w = (6/(ψρ_p)) Σ x_i/D̄_i
- D_s = 1/Σ(x_i/D̄_i)
- N_w = (1/(aρ_p)) Σ x_i/D̄_i³
Practice questions
Sphericity of a sphere is
- 0
- 0.5
- 1
- 6
Show the answer
Answer: C. 1 By definition.
Successive Tyler screens differ in opening by
- 2
- √2
- 10
- 1.5
Show the answer
Answer: B. √2 Area doubles.
The volume–surface mean diameter is also called the
- Sauter mean
- arithmetic mean
- median
- mode
Show the answer
Answer: A. Sauter mean D_s.
Specific surface of a powder increases when particles are
- larger
- smaller
- denser
- spherical only
Show the answer
Answer: B. smaller A_w ∝ 1/D.
Theory questions
A powder (ρ = 2650 kg/m³, ψ = 0.8) has 40 % at 200 µm, 35 % at 100 µm and 25 % at 50 µm. Find D_s and A_w. (5 marks)
Show the model answer
Σx/D = 0.4/200 + 0.35/100 + 0.25/50 = 0.002 + 0.0035 + 0.005 = 0.0105 µm⁻¹, so D_s = 95.2 µm. A_w = 6/(0.8 × 2650 × 95.2e-6) ≈ 29.7 m²/kg.
Define sphericity and explain differential and cumulative screen analysis. (4 marks)
Show the model answer
ψ = surface of a sphere of equal volume divided by particle surface. Differential: mass fraction retained between two screens vs mean size. Cumulative: fraction smaller (or larger) than each opening, a smooth S-curve used to read medians.
Size reduction
Topics: Principles of comminution; computer simulation of milling; size-reduction equipment: crushers, grinders, ultrafine grinders, cutting machines; equipment operation; energy laws.
Size reduction and the ball mill
Energy laws: Rittinger (fine grinding) E = K_R(1/D₂ − 1/D₁), proportional to new surface; Kick (coarse crushing) E = K_K ln(D₁/D₂), the same energy for the same reduction ratio; Bond (in between) W = 10 Wi (1/√P − 1/√F) with sizes in µm.
Jaw and gyratory crushers for coarse, roll crushers for intermediate, ball and hammer mills for fine grinding. A ball mill runs at 65–80 % of its critical speed n_c = 42.3/√(D − d) rpm, at which the balls would centrifuge.
- Kick: E ∝ ln(D₁/D₂)
- Rittinger: E ∝ (1/D₂ − 1/D₁)
- n_c = 42.3/√(D − d) rpm (D, d in m)
Example: By Kick’s law, crushing 50 → 10 mm needs E. What does 10 → 2 mm need?
- Both have a reduction ratio of 5.
- Kick’s law gives the same energy: E.
Answer: E (the same)
Example: Find the critical speed of a 1.2 m mill with 50 mm balls, and a suitable running speed.
- n_c = 42.3/√(1.2 − 0.05) ≈ 39.4 rpm.
- At 75 %: about 29.6 rpm.
Answer: ≈ 39 rpm; run ≈ 30 rpm
Energy for size reduction follows empirical laws: Rittinger (new surface) E = K_R(1/D₂ − 1/D₁) for fine grinding, Kick (ratio) E = K_K ln(D₁/D₂) for coarse crushing, and Bond W = 10 W_i(1/√D_p − 1/√D_f) with D in µm and W_i the work index in kWh/t. Jaw and gyratory crushers handle coarse feed, roll crushers intermediate, ball and hammer mills fine; ultrafine grinders (fluid-energy, agitated mills) reach a few microns. A ball mill runs at 65–80 % of the critical speed n_c = 42.3/√(D − d) rpm.
- Reduction ratio = feed size/product size.
- Only about 1 % of the energy creates new surface; the rest is heat.
- Open circuit vs closed circuit with a classifier (reduces over-grinding).
- Free crushing vs choke feeding.
Key formulas
- Rittinger: P/ṁ = K_R(1/D_p − 1/D_f)
- Kick: P/ṁ = K_K ln(D_f/D_p)
- Bond: P/ṁ = 0.3162 W_i (1/√D_p − 1/√D_f) (D in mm, kWh/t)
- n_c = 42.3/√(D − d) rpm (D, d in m)
Practice questions
Rittinger’s law suits
- coarse crushing
- fine grinding
- all sizes equally
- liquids
Show the answer
Answer: B. fine grinding Energy ∝ new surface.
Critical speed of a ball mill of 1.2 m diameter with 50 mm balls is about
- 39 rpm
- 12 rpm
- 90 rpm
- 200 rpm
Show the answer
Answer: A. 39 rpm 42.3/√1.15 ≈ 39.4.
A jaw crusher is a
- primary crusher
- ultrafine grinder
- cutter
- classifier
Show the answer
Answer: A. primary crusher Coarse feed.
In Bond’s law the work index is the energy to reduce from infinite size to
- 100 µm (80 % passing)
- 1 mm
- 1 µm
- 10 cm
Show the answer
Answer: A. 100 µm (80 % passing) Definition.
Theory questions
Crushing 10 t/h from 50 mm to 10 mm takes 15 kW. Estimate the power from 10 mm to 2 mm by Kick and Rittinger. (5 marks)
Show the model answer
Kick: same ratio 5 ⇒ same power 15 kW. Rittinger: K_R from (1/10 − 1/50) = 0.08 mm⁻¹ ⇒ 15/0.08 = 187.5; new (1/2 − 1/10) = 0.4 ⇒ 75 kW.
Explain the critical speed of a ball mill and the operating speed. (3 marks)
Show the model answer
At n_c centrifugal force holds balls to the shell and grinding stops. n_c = (1/2π)√(g/(R − r)); below it, balls cascade and cataract; mills run at 65–80 % of n_c.
Motion of particles through fluids
Topics: Mechanics of particle motion; equations for one-dimensional motion; terminal velocity; drag coefficient; motion of spherical particles; Stokes’, intermediate and Newton’s law regimes; criterion for settling regime; hindered settling; Richardson–Zaki; flow through packed beds (Kozeny–Carman, Ergun); fluidisation.
Settling, filtration and mixing
A small particle falling through a fluid reaches a terminal velocity given by Stokes’ law (Re < 1): v = g d²(ρp − ρ)/(18μ). Thickeners and classifiers use the difference in settling speeds. Centrifuges multiply g to settle fine particles.
Filtration builds a cake whose resistance grows with the volume filtered; filter aids keep compressible cakes porous. Mixers: propellers and turbines for liquids; ribbon blenders and tumblers for powders.
- v = g d²(ρp − ρ)/18μ (Re < 1)
- v ∝ d²
- Cake resistance grows with filtrate volume
Example: Find the settling velocity of 50 µm sand (ρ = 2650) in water (μ = 0.001 Pa·s).
- v = 9.81 × (50 × 10⁻⁶)² × 1650 / (18 × 0.001).
- ≈ 2.25 × 10⁻³ m/s = 2.25 mm/s.
Answer: ≈ 2.25 mm/s
Example: If the particle diameter is halved, how does the Stokes velocity change?
- v ∝ d².
- (1/2)² = 1/4: it falls four times slower.
Answer: one quarter
A settling particle reaches terminal velocity when gravity minus buoyancy equals drag. In the Stokes regime (Re_p < 1) u_t = g D²(ρ_p − ρ)/(18μ); in Newton’s regime (500 < Re < 2×10⁵) u_t = 1.74√(gD(ρ_p − ρ)/ρ). The criterion K = D[gρ(ρ_p − ρ)/μ²]^(1/3) picks the regime (K < 2.6 Stokes, K > 68.9 Newton). Crowded suspensions settle slower: u = u_t ε^n (Richardson–Zaki). Packed-bed pressure drop follows Ergun; a bed fluidises when ΔP equals bed weight per area.
- C_D = 24/Re in Stokes regime, ≈ 0.44 in Newton regime.
- Ergun: ΔP/L = 150μu(1 − ε)²/(ε³D²) + 1.75ρu²(1 − ε)/(ε³D).
- Minimum fluidisation: ΔP = L(1 − ε)(ρ_p − ρ)g.
- Hindered settling exponent n ≈ 4.65 at low Re.
Key formulas
- u_t = gD²(ρ_p − ρ)/(18μ) (Stokes)
- u_t = 1.74√(gD(ρ_p − ρ)/ρ) (Newton)
- K = D[gρ(ρ_p − ρ)/μ²]^(1/3)
- ΔP/L (Ergun) as above
Practice questions
In Stokes’ regime terminal velocity varies as
- D
- D²
- √D
- D³
Show the answer
Answer: B. D² u_t ∝ D².
Drag coefficient in the Newton regime is about
- 24/Re
- 0.44
- 18.5/Re^0.6
- 1
Show the answer
Answer: B. 0.44 Nearly constant.
Hindered settling is slower because of
- lower viscosity
- upflow of displaced fluid and crowding
- larger particles
- temperature
Show the answer
Answer: B. upflow of displaced fluid and crowding Richardson–Zaki.
A bed starts to fluidise when the pressure drop equals
- zero
- bed weight per unit area (buoyed)
- twice bed weight
- atmospheric
Show the answer
Answer: B. bed weight per unit area (buoyed) Force balance.
Theory questions
Find the terminal velocity of a 50 µm sand particle (2650 kg/m³) in water at 20 °C (μ = 0.001 Pa s). (4 marks)
Show the model answer
K = 50e-6 × [9.81 × 1000 × 1650/1e-6]^(1/3) = 50e-6 × 25 300 ≈ 1.26 < 2.6, Stokes. u_t = 9.81 × (50e-6)² × 1650/(18 × 0.001) = 2.25 × 10⁻³ m/s.
Write the Ergun equation and explain its two terms. (4 marks)
Show the model answer
ΔP/L = 150μu(1 − ε)²/(ε³D²) + 1.75ρu²(1 − ε)/(ε³D). The first is viscous (Kozeny–Carman, dominant at low Re); the second is inertial (Burke–Plummer, dominant at high Re).
Sedimentation and classification
Topics: Gravity settling processes; classifiers; clarifiers and thickeners; flocculation; batch sedimentation; Kynch theory; thickener area; centrifugal separation; cyclones and hydrocyclones.
Thickeners concentrate slurries; a batch settling test (interface height vs time) gives settling rates at each concentration. The Kynch method and the Coe–Clevenger balance give the area: A = Q_s(1/C − 1/C_u)/u for each concentration, taking the maximum. Classifiers separate by settling velocity (size or density). Centrifuges multiply g by ω²r/g (often thousands); the cut size of a cyclone falls with higher inlet velocity and smaller diameter.
- Settling zones: clear liquid, constant-concentration zone, transition, compression.
- Flocculants increase effective particle size.
- Centrifugal force factor = ω²r/g.
- Sigma theory: Q = 2u_t Σ for a centrifuge.
Key formulas
- A = Q_s (1/C − 1/C_u)/u_C (take max)
- Centrifugal factor = ω²r/g
- Settling in a centrifuge: u = ω²r D²(ρ_p − ρ)/(18μ)
Practice questions
A thickener is mainly designed for its
- height only
- area
- colour
- motor
Show the answer
Answer: B. area Area from settling flux.
Centrifugal factor at r = 0.1 m and 3000 rpm is about
- 100
- 1000
- 10 000
- 10
Show the answer
Answer: B. 1000 ω = 314 rad/s; ω²r/g ≈ 1006.
Kynch theory is used for
- filtration
- batch sedimentation analysis
- grinding
- conveying
Show the answer
Answer: B. batch sedimentation analysis Settling curves.
Flocculation helps settling by
- making particles larger
- reducing density
- heating
- grinding
Show the answer
Answer: A. making particles larger Larger flocs settle faster.
Theory questions
Describe a batch settling test and the zones seen. (4 marks)
Show the model answer
A uniform slurry in a cylinder separates into clear liquid at top, a zone of feed concentration, a transition zone and compression sludge at bottom; the interface height vs time curve is used for thickener design.
Explain how a hydrocyclone separates particles. (3 marks)
Show the model answer
Tangential inlet makes a vortex; coarse/dense particles move outward to the wall and leave at the apex (underflow); fine particles and most liquid leave by the vortex finder (overflow). Cut size depends on diameter, pressure drop and densities.
Conveying and gas–solid separation
Topics: Pneumatic and hydraulic conveying; belt, screw and bucket conveyors; solid–gas separations: settling chambers, cyclones, bag filters, scrubbers and electrostatic precipitators.
Pneumatic conveying moves powders in air (dilute phase at high velocity, dense phase at low velocity and high pressure). Mechanical conveyors (belt, screw, bucket elevator) carry bulk solids. Dust is removed by settling chambers (coarse, > 50 µm), cyclones (5–200 µm), bag filters (> 0.5 µm, high efficiency) and electrostatic precipitators (fine particles, 99 %+). A settling chamber catches a particle when its settling time is less than the residence time: u_t ≥ H u/L.
- Lapple cyclone cut size d₅₀ = √(9μW/(2πN_e v_i(ρ_p − ρ))).
- Grade efficiency η = 1/(1 + (d₅₀/d)²).
- ESP: Deutsch equation η = 1 − exp(−wA/Q).
- Bag filters need cleaning by shaking or pulse jet.
Key formulas
- Settling chamber: η = u_t L W/Q (laminar)
- d₅₀ = √(9μW/(2πN_e v_i Δρ))
- η_ESP = 1 − exp(−wA/Q)
Practice questions
An electrostatic precipitator efficiency follows the
- Deutsch equation
- Ergun equation
- Kick law
- Darcy law
Show the answer
Answer: A. Deutsch equation η = 1 − e^(−wA/Q).
Cyclone efficiency increases with
- larger diameter
- higher inlet velocity
- lower particle density
- smaller particles
Show the answer
Answer: B. higher inlet velocity Stronger vortex.
A bucket elevator moves solids
- horizontally
- vertically
- in air
- in water
Show the answer
Answer: B. vertically Lifting.
Dense-phase pneumatic conveying uses
- high velocity, low pressure
- low velocity, high pressure
- no gas
- water
Show the answer
Answer: B. low velocity, high pressure Plug flow.
Theory questions
An ESP treats 10 m³/s with plate area 2000 m² and drift velocity 0.1 m/s. Find efficiency. (3 marks)
Show the model answer
η = 1 − exp(−0.1 × 2000/10) = 1 − e^(−20) ≈ 100 %. With w = 0.01 m/s, η = 1 − e^(−2) = 86.5 %.
Compare cyclones, bag filters and electrostatic precipitators. (4 marks)
Show the model answer
Cyclone: cheap, no moving parts, poor below 5 µm. Bag filter: very high efficiency for fine dust, limited by temperature and moisture. ESP: handles large hot gas volumes with very low pressure drop and high efficiency, high capital cost.
Filtration
Topics: Cake filters, centrifugal filters, clarifying filters, cross-flow filters, filter media and aids; principles of cake filtration; constant-pressure and constant-rate filtration; washing; continuous rotary vacuum filters.
Flow through a growing cake follows dV/dt = A²ΔP/(μ(αcV + AR_m)). At constant pressure this integrates to t/V = (K_p/2)V + 1/q₀ with K_p = μcα/(A²ΔP): a plot of t/V against V is a line whose slope gives the specific cake resistance α and intercept the medium resistance R_m. Compressible cakes have α = α₀ΔP^s. Rotary drum filters run continuously; filter aids (diatomaceous earth) keep cakes porous.
- Slope of t/V vs V = μcα/(2A²ΔP).
- Intercept = μR_m/(AΔP).
- Washing rate in plate-and-frame = ¼ final filtration rate (thorough washing).
- Rotary drum: filtration time = fraction submerged/speed.
Key formulas
- dV/dt = A²ΔP/(μ(αcV + AR_m))
- t/V = (μαc/(2A²ΔP))V + μR_m/(AΔP)
- α = α₀ ΔP^s (compressible)
Practice questions
In constant-pressure filtration t/V vs V is
- a straight line
- a parabola
- a hyperbola
- constant
Show the answer
Answer: A. a straight line Ruth equation.
Filter aids are used to
- reduce porosity
- keep cakes porous
- increase viscosity
- heat the slurry
Show the answer
Answer: B. keep cakes porous Diatomite.
For a compressible cake, α
- is constant
- increases with pressure
- decreases with pressure
- is zero
Show the answer
Answer: B. increases with pressure α = α₀ΔP^s.
Continuous vacuum filtration uses a
- plate-and-frame press
- rotary drum filter
- sand bed
- cyclone
Show the answer
Answer: B. rotary drum filter Rotating drum.
Theory questions
Constant-pressure data give t/V = 2000V + 500 (s/m³, V in m³). How long to collect 1 m³, and 2 m³? (3 marks)
Show the model answer
t = 2000V² + 500V: 1 m³ ⇒ 2500 s; 2 m³ ⇒ 9000 s. Time grows faster than volume as the cake thickens.
Derive the constant-pressure filtration equation. (5 marks)
Show the model answer
Darcy: dV/(A dt) = ΔP/(μ(αW/A + R_m)), with cake mass W = cV. So dt/dV = μαcV/(A²ΔP) + μR_m/(AΔP). Integrating at constant ΔP: t/V = (μαc/(2A²ΔP))V + μR_m/(AΔP).
Mixing and agitation
Topics: Agitated vessels; impellers; flow patterns; power consumption; power number, Reynolds and Froude numbers; scale-up; mixing of solids and pastes.
Impellers (propellers and pitched turbines for axial flow, flat-blade turbines for radial flow, anchors for viscous liquids) drive circulation; baffles prevent swirling and vortexing. Power P = N_p ρn³D_a⁵; the power number is constant (~5 for a baffled six-blade Rushton turbine) in the turbulent range (Re > 10⁴) and N_p = K_L/Re in the laminar range, so P = K_L μn²D_a³. Scale-up at constant power per volume makes n ∝ D^(−2/3).
- Re = D_a²nρ/μ for impellers.
- Baffles: four, each about 1/12 of tank diameter.
- Scale-up rules: equal P/V, equal tip speed or equal blend time.
- Solids mixing: tumblers, ribbon blenders; pastes: kneaders, muller mixers.
Key formulas
- Re = D_a² n ρ/μ
- P = N_p ρ n³ D_a⁵ (turbulent)
- P = K_L μ n² D_a³ (laminar)
- Equal P/V: n₂ = n₁(D₁/D₂)^(2/3)
Practice questions
Baffles in a mixing tank are used to
- reduce power
- prevent vortex and swirl
- heat liquid
- support the shaft
Show the answer
Answer: B. prevent vortex and swirl Turbulent mixing.
In turbulent flow, power varies with speed as
- n
- n²
- n³
- n⁵
Show the answer
Answer: C. n³ P ∝ n³D⁵.
An anchor agitator is suited to
- low-viscosity liquids
- very viscous liquids
- gases
- powders
Show the answer
Answer: B. very viscous liquids Close clearance.
A Rushton turbine produces mainly
- axial flow
- radial flow
- no flow
- tangential only
Show the answer
Answer: B. radial flow Flat blades.
Theory questions
A Rushton turbine (D_a = 0.5 m, N_p = 5) runs at 2 rev/s in water. Find the power. (3 marks)
Show the model answer
Re = 0.25 × 2 × 1000/0.001 = 5 × 10⁵ turbulent. P = 5 × 1000 × 8 × 0.03125 = 1250 W.
Explain scale-up of agitated vessels. (4 marks)
Show the model answer
Keep geometric similarity, then hold one criterion: equal power per volume (mass transfer, dispersion) gives n ∝ D^(−2/3); equal tip speed (shear) gives n ∝ 1/D; equal blend time needs much more power. Choose by the process result.
Notes, examples and questions were written for this studio; the prescribed books are listed in the studio for reference.
Frequently asked questions
What is the Mechanical Operation Studio?
Crush, settle, filter, mix. Particle size analysis, size reduction laws, settling and fluidisation, sedimentation, cyclones and dust collection, filtration and agitation from the ASTU CHE241303 syllabus.
What can I do in the Mechanical Operation Studio?
Screen analysis and size reduction; Settling, Ergun and fluidisation; Cyclones, filtration and conveying; Mixing power and scale-up.
Is the Mechanical Operation Studio free?
Yes. It is free and runs in your browser with no sign-up.