IITIAN1997 STUDIO

Fluid mechanics and fluid machines

JLEE ME · 10 practice questions with answers

Practise and take a mock test →

Fluid flow, turbines and pumps

Topics: Fluid properties, pressure and its measurement, buoyancy, continuity and Bernoulli equations, flow measurement, flow through pipes, impact of jets; hydraulic turbines (Pelton, Francis, Kaplan); centrifugal and reciprocating pumps.

Pressure and buoyancy

Pressure head h = p/(ρg); a given pressure supports a taller column of a lighter liquid. Archimedes’ principle: the buoyant force equals the weight of fluid displaced. A floating body sinks until it displaces its own weight, so the submerged fraction equals the ratio of densities. Stability of floating bodies depends on the metacentric height (positive for stable).

  • h = p/ρg
  • Buoyancy = weight of displaced fluid
  • Submerged fraction = ρ_body/ρ_fluid

Example: Find the head of oil (SG 0.8) equivalent to 100 kPa.

  1. h = 100 000/(800 × 9.81).
  2. ≈ 12.7 m.

Answer: ≈ 12.7 m

Example: A wooden block of density 600 kg/m³ floats in water. What fraction is submerged?

  1. Fraction = 600/1000.
  2. = 0.6 (60 %).

Answer: 60 %

Bernoulli and flow measurement

Bernoulli: p/ρg + v²/2g + z = constant along a streamline (ideal flow). A pitot tube converts velocity head into a rise h: v = √(2gh). Venturi and orifice meters read a pressure drop; Q ∝ √Δp. Real flow loses head to friction: h_f = fLv²/(2gD).

  • Pitot: v = √(2gh)
  • Q ∝ √Δp
  • h_f = fLv²/2gD

Example: A pitot tube shows a 0.2 m rise of water. Find the velocity.

  1. v = √(2 × 9.81 × 0.2).
  2. ≈ 1.98 m/s.

Answer: ≈ 2 m/s

Jets, turbines and pumps

A jet striking a fixed flat plate normally exerts F = ρav². Hydraulic turbines: Pelton (impulse, high head, low specific speed), Francis (reaction, medium head), Kaplan (reaction, low head, high flow, high specific speed). Power P = ρgQHη.

Centrifugal pumps must be primed and are rated by manometric head; reciprocating pumps are positive-displacement, suited to high head and small flow, and use air vessels to smooth flow.

  • F = ρav² (normal jet, fixed plate)
  • P = ρgQHη
  • Pelton: high head; Kaplan: low head

Example: A 0.002 m² jet at 20 m/s hits a fixed plate normally. Find the force.

  1. F = 1000 × 0.002 × 20².
  2. = 800 N.

Answer: 800 N

Example: A turbine uses 2 m³/s under 50 m head at 90 % efficiency. Find its power.

  1. P = 1000 × 9.81 × 2 × 50 × 0.9.
  2. ≈ 883 kW.

Answer: ≈ 883 kW

Example: Which turbine suits a 400 m head with small flow?

  1. High head and small flow mean low specific speed.
  2. Pelton wheel.

Answer: Pelton

Viscosity is resistance to shear: τ = μ du/dy for Newtonian fluids. Pressure at depth is ρgh, and a floating body is stable when its metacentre is above its centre of gravity. Continuity gives A₁V₁ = A₂V₂, and Bernoulli conserves p/ρg + V²/2g + z. Darcy’s loss is h_f = fLV²/2gD. Turbines are chosen by head: Pelton (impulse, high head), Francis (reaction, medium head) and Kaplan (reaction, low head). A draft tube recovers exit head in reaction turbines. Centrifugal pumps need priming and suffer cavitation when suction pressure falls to vapour pressure; reciprocating pumps give high head with pulsating flow, smoothed by air vessels.

  • Specific speed N_s = N√P/H^(5/4) for turbines; N√Q/H^(3/4) for pumps.
  • Reynolds number Re = ρVD/μ: laminar below 2000 in pipes.
  • Slip of a reciprocating pump = Q_theoretical − Q_actual.
  • Affinity laws: Q ∝ N, H ∝ N², P ∝ N³.
  • Archimedes: buoyant force = weight of displaced fluid.

Key formulas

  • τ = μ du/dy
  • A₁V₁ = A₂V₂
  • h_f = fLV²/2gD
  • P = ρgQH
  • N_s = N√P/H^(5/4)

Practice questions

A Pelton wheel suits

  1. low head
  2. medium head
  3. high head
  4. no head
Show the answer

Answer: C. high head Impulse turbine.

A Kaplan turbine is

  1. an impulse turbine for high head
  2. a reaction turbine for low head
  3. a pump
  4. a compressor
Show the answer

Answer: B. a reaction turbine for low head Axial flow.

A draft tube is used with

  1. Pelton wheels
  2. reaction turbines
  3. reciprocating pumps
  4. gear pumps
Show the answer

Answer: B. reaction turbines Recovers head.

Priming is needed for

  1. reciprocating pumps
  2. centrifugal pumps
  3. gear pumps
  4. screw pumps
Show the answer

Answer: B. centrifugal pumps Impeller cannot lift air.

Air vessels are fitted to

  1. centrifugal pumps
  2. reciprocating pumps
  3. turbines
  4. nozzles
Show the answer

Answer: B. reciprocating pumps Smooth the flow.

Cavitation occurs when pressure falls to

  1. atmospheric
  2. vapour pressure
  3. gauge zero
  4. critical pressure
Show the answer

Answer: B. vapour pressure Bubbles collapse.

A floating body is stable if the metacentre is

  1. below the centre of gravity
  2. above the centre of gravity
  3. at the centre of gravity
  4. at the base
Show the answer

Answer: B. above the centre of gravity Positive metacentric height.

Pump power varies with speed as

  1. N
  2. N²
  3. N³
  4. √N
Show the answer

Answer: C. N³ Affinity law.

Viscosity of liquids with rising temperature

  1. increases
  2. decreases
  3. does not change
  4. becomes zero
Show the answer

Answer: B. decreases Cohesion reduces.

Bernoulli’s equation represents conservation of

  1. mass
  2. energy
  3. momentum
  4. force
Show the answer

Answer: B. energy Total head.

The practice questions were written for this studio; they are not copied from ASTU papers. ASTU publishes no topic syllabus for these exams, so the topics are an informed guide based on diploma courses, not an official list.

Practise and take a mock test →