IITIAN1997 STUDIO

PC systems, consumer electronics, PCB and troubleshooting

JLEE ECE / ETE · 10 practice questions with answers

Practise and take a mock test →

PC hardware, audio-video, PCBs and fault finding

Topics: Motherboard, buses, memory and storage, BIOS, peripherals, SMPS; audio systems, microphones and speakers; TV and display technology, DTH, cameras; home appliances; PCB design and fabrication; component testing and troubleshooting.

PC hardware

A PC has a motherboard with CPU, chipset, RAM slots and expansion buses (PCIe), storage (SSD, HDD), and an SMPS giving +12 V, +5 V and +3.3 V. At power-on the firmware (BIOS/UEFI) runs the POST, then loads the boot loader and the operating system. Memory bandwidth = bus width (bytes) × transfers per second.

  • SMPS: 12, 5, 3.3 V
  • POST → firmware → boot loader → OS
  • Bandwidth = bytes per transfer × rate

Example: A 64-bit memory bus runs at 3200 million transfers per second. Find its bandwidth.

  1. 64 bits = 8 bytes per transfer.
  2. 8 × 3.2 × 10⁹ = 25.6 GB/s.

Answer: 25.6 GB/s

Example: A PC beeps and shows nothing on screen after power-on. Which stage failed?

  1. Beep codes come from the firmware’s self-test.
  2. The POST found a hardware fault (often RAM or graphics).

Answer: POST

Audio, video and display

Microphones (dynamic, condenser) turn sound into voltage; speakers (typically 4 or 8 Ω) do the reverse. Power into a speaker P = V²/R. Displays: LCD (backlit), LED-backlit LCD, OLED (each pixel emits light); resolution such as 1920 × 1080 (Full HD, 16:9). DTH television uses satellite dishes and set-top boxes.

  • P = V²/R
  • Full HD = 1920 × 1080
  • OLED: self-emissive pixels

Example: 8 V RMS drives an 8 Ω speaker. Find the power.

  1. P = 8²/8.
  2. = 8 W.

Answer: 8 W

Example: How many pixels does a Full HD screen have?

  1. 1920 × 1080.
  2. ≈ 2.07 million.

Answer: ≈ 2.07 MP

PCBs, components and troubleshooting

PCBs are made by printing a pattern, etching copper, drilling and soldering (through-hole or surface mount). Read resistor colour bands (digit, digit, multiplier, tolerance) and capacitor codes (104 = 10 × 10⁴ pF = 100 nF). Troubleshooting moves from symptoms to power checks, signal tracing and component tests with a multimeter.

  • Colour code: digit, digit, multiplier, tolerance
  • Capacitor 104 = 100 nF
  • Check power first

Example: Read brown–black–red–gold.

  1. 1, 0, ×100.
  2. 1000 Ω = 1 kΩ, ±5 %.

Answer: 1 kΩ ±5 %

Example: What value is a capacitor marked 104?

  1. 10 followed by 4 zeros, in pF: 100 000 pF.
  2. = 100 nF (0.1 µF).

Answer: 100 nF

A PC has a motherboard with CPU socket, chipset, RAM slots and expansion buses; POST runs at boot, and BIOS or UEFI starts the OS. Storage is HDD or SSD on SATA or NVMe. A desktop SMPS gives +12 V, +5 V and +3.3 V. Moving-coil speakers and dynamic microphones use magnetic coils; condenser microphones use capacitance. LED and OLED displays have replaced CRTs; HDMI carries digital audio-video. PCB fabrication runs from layout to etching (ferric chloride), drilling and soldering (60/40 tin-lead classic solder). Troubleshooting checks power first, then signals stage by stage; resistor colour codes give values, and a multimeter tests diodes and continuity.

  • Colour code order: BBROYGBVGW (0–9); gold ±5%, silver ±10%.
  • OLED needs no backlight.
  • Remote controls commonly use infrared LEDs.
  • SMD components mount on the board surface.
  • Fibre-glass (FR-4) is the common PCB base.

Key formulas

  • Colour code: ab × 10ᶜ Ω
  • P = V²/R (rating check)

Practice questions

A resistor with bands red, red, orange is

  1. 22 Ω
  2. 220 Ω
  3. 22 kΩ
  4. 2.2 kΩ
Show the answer

Answer: C. 22 kΩ 22 × 10³.

Silver tolerance band means

  1. ±1%
  2. ±5%
  3. ±10%
  4. ±20%
Show the answer

Answer: C. ±10% Gold is ±5%.

PCBs are etched with

  1. ferric chloride
  2. sugar
  3. ammonia gas
  4. petrol
Show the answer

Answer: A. ferric chloride Removes copper.

POST runs at

  1. shutdown
  2. boot
  3. printing
  4. copying
Show the answer

Answer: B. boot Power-on self-test.

A common PCB base is

  1. FR-4
  2. glass bulb
  3. wood only
  4. mica sheet
Show the answer

Answer: A. FR-4 Glass epoxy.

OLED pixels

  1. need a backlight
  2. emit their own light
  3. use a CRT gun
  4. need phosphor plasma
Show the answer

Answer: B. emit their own light Self-emissive.

HDMI carries

  1. digital audio and video
  2. analogue video only
  3. mains power
  4. RF only
Show the answer

Answer: A. digital audio and video Digital interface.

TV remotes commonly use

  1. infrared
  2. X-rays
  3. UV
  4. gamma
Show the answer

Answer: A. infrared IR LED.

First step in troubleshooting is checking

  1. power supply
  2. colour of cabinet
  3. software licence
  4. warranty card
Show the answer

Answer: A. power supply Common fault.

SMD means

  1. surface-mount device
  2. single-mode diode
  3. signal modulator
  4. solid metal disc
Show the answer

Answer: A. surface-mount device Mounted on the surface.

The practice questions were written for this studio; they are not copied from ASTU papers. ASTU publishes no topic syllabus for these exams, so the topics are an informed guide based on diploma courses, not an official list.

Practise and take a mock test →