Network theorems, resonance and filters
Topics: DC and AC circuits; superposition, Thevenin, Norton and maximum power transfer theorems; star–delta; resonance and Q factor; RC and RL transients; filters and attenuators; two-port parameters.
Network theorems
Thevenin and Norton reduce any linear two-terminal network to a source with a resistance; they convert into each other with I_N = V_th/R_th. Superposition handles several sources one at a time (other voltage sources shorted, current sources opened). Maximum power reaches the load when R_L = R_th.
- I_N = V_th/R_th
- Superposition: one source at a time
- P_max at R_L = R_th
Example: Convert V_th = 10 V, R_th = 5 Ω into a Norton equivalent.
- I_N = 10/5 = 2 A.
- R_N = 5 Ω in parallel.
Answer: 2 A ∥ 5 Ω
Example: In superposition, how is an ideal voltage source removed?
- Its voltage is set to zero.
- It is replaced by a short circuit.
Answer: Short-circuited
Resonance and Q factor
In a series RLC circuit at resonance f₀ = 1/(2π√LC), the impedance is purely R and the current is a maximum. The quality factor Q = (1/R)√(L/C) = f₀/BW measures sharpness: high Q, narrow bandwidth, good selectivity. A parallel (tank) circuit has maximum impedance at resonance.
- f₀ = 1/(2π√LC)
- Q = (1/R)√(L/C)
- BW = f₀/Q
Example: R = 10 Ω, L = 0.1 H, C = 10 µF. Find f₀, Q and the bandwidth.
- f₀ = 1/(2π√(10⁻⁶)) ≈ 159 Hz; Q = (1/10)√(0.1/10⁻⁵) = 10.
- BW = 159/10 ≈ 15.9 Hz.
Answer: 159 Hz, Q 10, BW ≈ 16 Hz
Transients, filters and attenuators
An RC or RL circuit responds to a step exponentially with time constant τ = RC or L/R. A simple RC low-pass filter has cut-off f_c = 1/(2πRC), where the output is 3 dB down; high-pass swaps R and C. Attenuation in dB = 20 log(V_in/V_out). Two-port networks are described by Z, Y, h or ABCD parameters.
- f_c = 1/(2πRC) (−3 dB)
- Attenuation = 20 log(V₁/V₂)
- τ = RC or L/R
Example: Find the cut-off frequency of an RC low-pass filter with 1 kΩ and 0.1 µF.
- f_c = 1/(2π × 10³ × 10⁻⁷).
- ≈ 1592 Hz.
Answer: ≈ 1.6 kHz
Example: An attenuator reduces 10 V to 1 V. Find the attenuation.
- 20 log(10/1).
- = 20 dB.
Answer: 20 dB
Network theorems simplify linear circuits. Thevenin gives V_th and R_th; Norton gives I_N in parallel with R_N, and V_th = I_N R_N. Maximum power transfer in AC needs Z_L = Z_s*. Series resonance has f₀ = 1/(2π√LC), minimum impedance, and bandwidth f₀/Q. Filters pass selected bands: low-pass, high-pass, band-pass, and band-stop; a first-order RC filter has cutoff f_c = 1/(2πRC), with −3 dB at cutoff. Two-port parameters include Z, Y, h and ABCD; h parameters model BJTs, and a network is reciprocal when AD − BC = 1.
- Half-power points are at 0.707 of the peak.
- Attenuation in nepers: 1 Np = 8.686 dB.
- T and π attenuators keep impedance constant.
- Capacitor charging: V = V_s(1 − e^(−t/RC)).
- Node: junction; branch: element between nodes; loop: closed path.
Key formulas
- f₀ = 1/(2π√LC)
- Q = ω₀L/R
- BW = f₀/Q
- f_c = 1/(2πRC)
- V_th = I_N R_N
Practice questions
A Norton equivalent has
- a current source in parallel with resistance
- a voltage source in series
- only resistors
- no source
Show the answer
Answer: A. a current source in parallel with resistance Dual of Thevenin.
At half-power frequency the voltage gain falls by
- 1 dB
- 3 dB
- 6 dB
- 10 dB
Show the answer
Answer: B. 3 dB 0.707.
A low-pass filter passes
- low frequencies
- high frequencies
- one frequency only
- no frequencies
Show the answer
Answer: A. low frequencies Name.
Bandwidth of a resonant circuit is
- f₀Q
- f₀/Q
- Q/f₀
- f₀ + Q
Show the answer
Answer: B. f₀/Q Selectivity.
Higher Q gives
- wider bandwidth
- narrower bandwidth
- no resonance
- more resistance
Show the answer
Answer: B. narrower bandwidth Sharper peak.
BJT small-signal models commonly use
- Z parameters
- h parameters
- ABCD only
- S only
Show the answer
Answer: B. h parameters Hybrid.
For maximum AC power, Z_L should be
- Z_s
- the conjugate of Z_s
- 0
- infinite
Show the answer
Answer: B. the conjugate of Z_s Reactances cancel.
RC time constant has the unit
- ohm
- second
- farad
- hertz
Show the answer
Answer: B. second τ = RC.
A band-stop filter
- rejects a band
- passes only one band
- passes all
- blocks DC only
Show the answer
Answer: A. rejects a band Notch.
One neper is about
- 1 dB
- 3 dB
- 8.686 dB
- 20 dB
Show the answer
Answer: C. 8.686 dB Conversion.
The practice questions were written for this studio; they are not copied from ASTU papers. ASTU publishes no topic syllabus for these exams, so the topics are an informed guide based on diploma courses, not an official list.