IITIAN1997 STUDIO

Principles of electrical engineering

JLEE EE · 10 practice questions with answers

Practise and take a mock test →

DC circuits, magnetism, capacitors, AC fundamentals, batteries

Topics: Current, voltage, resistance, work, power and energy; Ohm’s and Kirchhoff’s laws; series and parallel circuits; magnetic field, electromagnetic induction, Faraday’s and Lenz’s laws, inductance; capacitors; AC waveform, RMS and average values; cells and batteries.

DC circuits, power and energy

Ohm’s law V = IR; resistances add in series and their reciprocals add in parallel. Kirchhoff’s current law: currents into a node sum to zero; voltage law: voltages round a loop sum to zero. Resistance depends on the material and shape, R = ρL/A, and rises with temperature in metals, R_t = R₀(1 + αt).

Power P = VI = I²R = V²/R; energy in kilowatt-hours (units) = kW × hours.

  • Series: R = R₁ + R₂; parallel: 1/R = 1/R₁ + 1/R₂
  • R = ρL/A
  • Energy (units) = kW × h

Example: 6 Ω and 3 Ω in parallel are in series with 4 Ω across 12 V. Find the current.

  1. 6 ∥ 3 = 18/9 = 2 Ω; total = 6 Ω.
  2. I = 12/6 = 2 A.

Answer: 2 A

Example: Find the resistance of 100 m of copper wire of 1 mm² (ρ = 1.72 × 10⁻⁸ Ω·m).

  1. R = 1.72 × 10⁻⁸ × 100/10⁻⁶.
  2. = 1.72 Ω.

Answer: 1.72 Ω

Example: A 1 kW heater runs 3 hours a day for 30 days. How many units does it use?

  1. 1 × 3 × 30.
  2. = 90 kWh (units).

Answer: 90 units

Magnetism and electromagnetic induction

A current-carrying conductor in a magnetic field feels F = BIL (Fleming’s left-hand rule, the motor principle). A changing flux linking a coil induces e = N dΦ/dt (Faraday), in a direction opposing the change (Lenz); Fleming’s right-hand rule gives the direction in generators.

Self-inductance L stores energy ½LI²; mutual inductance links two coils, the basis of the transformer.

  • F = BIL
  • e = N dΦ/dt; Lenz opposes the change
  • Energy in an inductor = ½LI²

Example: A 200-turn coil’s flux changes by 0.01 Wb in 0.1 s. Find the induced EMF.

  1. e = 200 × 0.01/0.1.
  2. = 20 V.

Answer: 20 V

Example: A 0.2 m conductor carries 10 A at right angles to a 0.5 T field. Find the force.

  1. F = BIL = 0.5 × 10 × 0.2.
  2. = 1 N.

Answer: 1 N

Capacitors, AC quantities and batteries

Capacitors in parallel add; in series their reciprocals add. Energy stored = ½CV². For a sine wave V_rms = V_m/√2 (0.707V_m), V_avg = 0.637V_m (half cycle), form factor 1.11 and peak factor 1.414. Our 230 V supply is an RMS value with a peak of about 325 V.

Battery capacity is in ampere-hours: a 100 Ah battery gives 5 A for about 20 hours. Lead–acid cells are 2 V each; lithium-ion about 3.6–3.7 V.

  • V_rms = V_m/√2
  • Form factor 1.11; peak factor 1.414
  • Series capacitors: 1/C = 1/C₁ + 1/C₂

Example: A sine wave peaks at 325 V. Find its RMS and average values.

  1. V_rms = 325/√2 ≈ 230 V.
  2. V_avg = 0.637 × 325 ≈ 207 V.

Answer: ≈ 230 V and 207 V

Example: Two 4 µF capacitors are joined in series. Find the total capacitance.

  1. 1/C = 1/4 + 1/4.
  2. C = 2 µF.

Answer: 2 µF

Ohm’s law is V = IR, power is P = VI = I²R = V²/R, and energy of 1 kWh is one Board of Trade unit. Resistances add in series; in parallel, reciprocals add. Faraday’s law gives induced EMF e = −N dΦ/dt, and Lenz’s law gives its direction, opposing the change. Fleming’s left-hand rule gives motor force, the right-hand rule generator EMF. Capacitors in parallel add and in series add reciprocally (opposite to resistors). A sine wave has RMS value V_m/√2, average 2V_m/π, form factor 1.11 and peak factor 1.414. A lead-acid cell gives about 2 V, with battery capacity in ampere-hours.

  • R = ρl/A; resistance of metals rises with temperature.
  • Force on a conductor F = BIl; induced EMF e = Blv.
  • Energy in an inductor ½LI²; in a capacitor ½CV².
  • Series capacitors: 1/C = Σ1/Cᵢ; parallel: C = ΣCᵢ.
  • Ni-Cd cell ≈ 1.2 V; lithium-ion ≈ 3.7 V.

Key formulas

  • V = IR
  • P = VI
  • R = ρl/A
  • e = −N dΦ/dt
  • V_rms = V_m/√2
  • V_av = 2V_m/π

Practice questions

The unit of electrical energy billed by suppliers is

  1. kW
  2. kWh
  3. kVA
  4. kV
Show the answer

Answer: B. kWh One unit = 1 kWh.

Fleming’s left-hand rule is used for

  1. generators
  2. motors
  3. transformers
  4. rectifiers
Show the answer

Answer: B. motors Direction of force.

Lenz’s law is a consequence of conservation of

  1. charge
  2. energy
  3. mass
  4. flux
Show the answer

Answer: B. energy Opposes the cause.

Doubling the length and diameter of a wire makes its resistance

  1. half
  2. double
  3. four times
  4. same
Show the answer

Answer: A. half R ∝ l/d².

Two capacitors in parallel have total capacitance

  1. C₁ + C₂
  2. C₁C₂/(C₁ + C₂)
  3. 1/C₁ + 1/C₂
  4. C₁ − C₂
Show the answer

Answer: A. C₁ + C₂ Adds.

The form factor of a sine wave is

  1. 1.11
  2. 1.414
  3. 0.707
  4. 0.637
Show the answer

Answer: A. 1.11 RMS/average.

The peak factor of a sine wave is

  1. 1.11
  2. 1.414
  3. 0.707
  4. 2
Show the answer

Answer: B. 1.414 Peak/RMS.

The voltage of a fully charged lead-acid cell is about

  1. 1.2 V
  2. 2 V
  3. 3.7 V
  4. 6 V
Show the answer

Answer: B. 2 V Nominal 2 V.

Battery capacity is rated in

  1. volts
  2. ampere-hours
  3. ohms
  4. watts
Show the answer

Answer: B. ampere-hours Ah.

The unit of magnetic flux is

  1. tesla
  2. weber
  3. henry
  4. farad
Show the answer

Answer: B. weber Tesla is flux density.

The practice questions were written for this studio; they are not copied from ASTU papers. ASTU publishes no topic syllabus for these exams, so the topics are an informed guide based on diploma courses, not an official list.

Practise and take a mock test →