IITIAN1997 STUDIO

Thermodynamics and kinetics (Ch-404)

JLEE CHE · 260 practice questions with answers

Practise and take a mock test →

Laws of thermodynamics, properties and reaction kinetics

Topics: First and second laws, internal energy, enthalpy, entropy, heat capacities, reversible and irreversible processes, Carnot cycle, refrigeration (COP), phase equilibria, Gibbs free energy, fugacity, equilibrium constant; rate of reaction, order and molecularity, rate constant and Arrhenius equation, half-life, batch, CSTR and PFR reactors, catalysis.

Laws of thermodynamics

First law: ΔU = Q − W for a closed system; for flow systems the enthalpy H = U + PV is the useful energy. Heat capacities: Cp − Cv = R for ideal gases. Second law: heat flows from hot to cold by itself; entropy of an isolated system never decreases. For a reversible transfer, ΔS = Q/T.

Isothermal ideal-gas work W = nRT ln(V₂/V₁); adiabatic reversible process: PV^γ = constant.

  • ΔU = Q − W
  • Isothermal W = nRT ln(V₂/V₁)
  • ΔS = Q_rev/T

Example: 1 mol of ideal gas expands isothermally and reversibly at 300 K to double its volume. Find W.

  1. W = nRT ln 2 = 1 × 8.314 × 300 × 0.693.
  2. ≈ 1729 J.

Answer: ≈ 1.73 kJ

Example: Find the entropy change when 1 kg of ice melts at 0 °C (latent heat 334 kJ/kg).

  1. ΔS = Q/T = 334 000 / 273.15.
  2. ≈ 1223 J/K.

Answer: ≈ 1.22 kJ/K

Cycles, refrigeration and equilibrium

The Carnot cycle sets the limit: η = 1 − T_c/T_h. A refrigerator’s coefficient of performance is COP = T_c/(T_h − T_c) for a Carnot machine. Real cycles fall short because of irreversibilities.

Gibbs free energy G = H − TS decides spontaneity at constant T and P (ΔG < 0). At equilibrium ΔG° = −RT ln K.

  • η_Carnot = 1 − T_c/T_h
  • COP_ref = T_c/(T_h − T_c)
  • ΔG° = −RT ln K

Example: Find the Carnot efficiency between 500 K and 300 K.

  1. η = 1 − 300/500.
  2. = 0.4 = 40 %.

Answer: 40 %

Example: Find the Carnot COP of a refrigerator between −10 °C and 30 °C.

  1. T_c = 263 K, T_h = 303 K.
  2. COP = 263/40 ≈ 6.6.

Answer: ≈ 6.6

Reaction kinetics

Rate = k[A]ⁿ, where n is the order (found by experiment) and k depends on temperature by the Arrhenius equation k = A e^(−Ea/RT). The units of k reveal the order: s⁻¹ for first order, L mol⁻¹ s⁻¹ for second.

A first-order reaction has a constant half-life t½ = 0.693/k, independent of concentration. Catalysts lower the activation energy without being consumed.

  • First order: t½ = 0.693/k
  • k = A e^(−Ea/RT)
  • Units of k give the order

Example: A first-order reaction has k = 0.0231 min⁻¹. Find its half-life.

  1. t½ = 0.693/0.0231.
  2. = 30 min.

Answer: 30 min

Example: A rate doubles from 300 K to 310 K. Estimate Ea.

  1. ln 2 = (Ea/R)(1/300 − 1/310).
  2. Ea = 8.314 × 0.693 / 1.075 × 10⁻⁴ ≈ 53.6 kJ/mol.

Answer: ≈ 54 kJ/mol

The first law conserves energy: ΔU = Q − W for a closed system and ΔH = Q for a flow process with no shaft work. The second law says entropy of an isolated system never decreases; the Carnot efficiency 1 − T_c/T_h is the maximum for any engine between those reservoirs. For an ideal gas Cₚ − C_v = R, and γ = Cₚ/C_v (1.4 for air). A reaction is spontaneous when ΔG < 0, and ΔG° = −RT ln K. Rate constants follow Arrhenius, k = A e^(−E/RT). A first-order reaction has half-life 0.693/k, independent of concentration. For the same conversion and positive order, a plug-flow reactor needs a smaller volume than a CSTR.

  • Isothermal ideal gas: W = nRT ln(V₂/V₁); adiabatic: PV^γ = constant.
  • COP of a refrigerator = T_c/(T_h − T_c) (Carnot).
  • Clausius–Clapeyron: ln(P₂/P₁) = (ΔH_vap/R)(1/T₁ − 1/T₂).
  • Zero-order half-life ∝ C₀; second-order half-life ∝ 1/C₀.
  • A catalyst lowers activation energy but does not shift equilibrium.

Key formulas

  • ΔU = Q − W
  • η_Carnot = 1 − T_c/T_h
  • ΔG° = −RT ln K
  • k = A e^(−E/RT)
  • t½ = 0.693/k

Practice questions

For an ideal gas Cₚ − C_v =

  1. 0
  2. R
  3. γ
  4. R/γ
Show the answer

Answer: B. R Mayer’s relation.

A reaction is spontaneous when

  1. ΔG > 0
  2. ΔG < 0
  3. ΔH > 0
  4. ΔS < 0
Show the answer

Answer: B. ΔG < 0 Gibbs criterion.

The half-life of a first-order reaction is

  1. 0.693/k
  2. k/0.693
  3. C₀/2k
  4. 1/(kC₀)
Show the answer

Answer: A. 0.693/k ln 2/k.

A Carnot engine works between 500 K and 300 K. Its efficiency is

  1. 40%
  2. 60%
  3. 25%
  4. 50%
Show the answer

Answer: A. 40% 1 − 300/500.

A catalyst

  1. shifts equilibrium
  2. lowers activation energy
  3. increases ΔH
  4. is consumed
Show the answer

Answer: B. lowers activation energy Faster approach to equilibrium.

For the same conversion, which reactor needs the smaller volume (positive order)?

  1. CSTR
  2. PFR
  3. both equal
  4. batch always
Show the answer

Answer: B. PFR Higher average concentration.

Entropy of an isolated system in a spontaneous process

  1. decreases
  2. increases
  3. is constant
  4. is zero
Show the answer

Answer: B. increases Second law.

In an adiabatic process

  1. Q = 0
  2. W = 0
  3. ΔU = 0
  4. ΔT = 0
Show the answer

Answer: A. Q = 0 No heat exchange.

The Arrhenius equation relates rate constant to

  1. pressure
  2. temperature
  3. volume
  4. concentration
Show the answer

Answer: B. temperature k = A e^(−E/RT).

γ for air is about

  1. 1.67
  2. 1.4
  3. 1.3
  4. 1.0
Show the answer

Answer: B. 1.4 Diatomic gas.

Which of these properties is extensive (depends on the amount of material)?

  1. Heat capacity
  2. Molal heat capacity
  3. Pressure
  4. Concentration
Show the answer

Answer: A. Heat capacity

Which of the following is a property introduced by the second law of thermodynamics?

  1. Concentration
  2. Mass
  3. Temperature
  4. Entropy
Show the answer

Answer: D. Entropy

The first law of thermodynamics, with Q heat added and W work done by the system, is written as

  1. dQ = dE + dW
  2. dQ = dE-dW
  3. dE = dQ + dW
  4. dW = dQ + dE
Show the answer

Answer: A. dQ = dE + dW

The first law of thermodynamics is concerned with

  1. direction of energy transfer only.
  2. reversible processes only.
  3. irreversible processes only.
  4. none of these (it states conservation of energy).
Show the answer

Answer: D. none of these (it states conservation of energy).

Which statement about an irreversible process is correct?

  1. is the analog of linear frictionless motion in machines.
  2. is an idealised visualisation of behaviour of a system.
  3. yields the maximum amount of work.
  4. yields an amount of work less than that of a reversible process.
Show the answer

Answer: D. yields an amount of work less than that of a reversible process.

In an adiabatic process,

  1. heat transfer is zero.
  2. temperature change is zero.
  3. work done is a path function.
  4. enthalpy remains constant.
Show the answer

Answer: A. heat transfer is zero.

Enthalpy is defined by the relation

  1. H = E - PV
  2. H = F - TS
  3. H - E = PV
  4. none of these
Show the answer

Answer: C. H - E = PV

The efficiency of a Carnot engine operating between two reservoirs depends on

  1. two temperatures only.
  2. pressure of working fluid.
  3. mass of the working fluid.
  4. mass and pressure both of the working fluid.
Show the answer

Answer: A. two temperatures only.

Liquid water in equilibrium with its own vapour has how many degrees of freedom?

  1. 0
  2. 1
  3. 2
  4. 3
Show the answer

Answer: B. 1

A Carnot engine works between a cold reservoir T₁ and a hot reservoir T₂ (T₁ < T₂). Its efficiency is

  1. (T₂-T₁)/T₂
  2. (T₂-T₁)/T₁
  3. (T₁-T₂)/T₂
  4. (T₁-T₂)/T₁
Show the answer

Answer: A. (T₂-T₁)/T₂

For a reversible process at constant pressure, the enthalpy change of the system is

  1. Cv.dT
  2. Cp.dT
  3. ∫Cp dT
  4. ∫Cv dT
Show the answer

Answer: C. ∫Cp dT

The internal energy of an ideal gas

  1. increases with increase in pressure.
  2. decreases with increase in temperature.
  3. is independent of temperature.
  4. none of these.
Show the answer

Answer: D. none of these.

A relation between pressure, volume and temperature of a gas is known as

  1. equation of state
  2. Gibbs Duhem equation
  3. ideal gas equation
  4. none of these
Show the answer

Answer: A. equation of state

An isobaric process takes place at constant

  1. temperature
  2. pressure
  3. volume
  4. entropy
Show the answer

Answer: B. pressure

An isentropic process takes place at constant

  1. enthalpy
  2. pressure
  3. volume
  4. none of these
Show the answer

Answer: D. none of these

Throttling (the Joule–Thomson process) occurs at constant

  1. enthalpy
  2. entropy
  3. pressure
  4. none of these
Show the answer

Answer: A. enthalpy

The state where solid, liquid and vapour of a substance coexist is the ____ point.

  1. freezing
  2. triple
  3. boiling
  4. Boyle
Show the answer

Answer: B. triple

During an isothermal process, the internal energy of an ideal gas

  1. increases
  2. decreases
  3. remains unchanged
  4. data insufficient, can't be predicted
Show the answer

Answer: C. remains unchanged

For an ideal gas, PVᵞ = constant (γ = Cp/Cv) applies to a reversible ____ process.

  1. isothermal
  2. adiabatic
  3. isobaric
  4. isochoric
Show the answer

Answer: B. adiabatic

When an ideal gas is compressed isothermally and reversibly,

  1. only ΔE = 0
  2. only ΔH = 0
  3. ΔE = ΔH = 0
  4. dQ = dE
Show the answer

Answer: C. ΔE = ΔH = 0

Boyle’s law states that

  1. P ∝ 1/V at constant temperature only.
  2. P ∝ 1/V when temperature and mass of gas are constant.
  3. P ∝ V at constant temperature and mass.
  4. P/V = constant for any gas.
Show the answer

Answer: B. P ∝ 1/V when temperature and mass of gas are constant.

Real gases follow PV = nRT most closely at

  1. low pressure & high temperature.
  2. high pressure & low temperature.
  3. low pressure & low temperature.
  4. none of these.
Show the answer

Answer: A. low pressure & high temperature.

The reduced pressure of a gas is the ratio of its

  1. pressure to critical pressure.
  2. critical pressure to pressure.
  3. pressure to pseudocritical pressure.
  4. pseudocritical pressure to pressure.
Show the answer

Answer: A. pressure to critical pressure.

Which form of the Gibbs phase rule (C components, P phases, F degrees of freedom) is correct?

  1. P+F-C=2
  2. C=P-F+2
  3. F = C - P - 2
  4. P = F - C - 2.
Show the answer

Answer: A. P+F-C=2

At the triple point of a pure substance, the number of degrees of freedom is

  1. 0
  2. 1
  3. 2
  4. 3
Show the answer

Answer: A. 0

The relation Cp − Cv = R holds for ____ gases.

  1. ideal
  2. all
  3. very high pressure
  4. very low temperature
Show the answer

Answer: A. ideal

An isolated system exchanges ____ with its surroundings.

  1. matter
  2. energy
  3. neither matter nor energy
  4. both matter and energy
Show the answer

Answer: C. neither matter nor energy

The standard heat of formation of an element in its standard state is

  1. 0
  2. < 0
  3. > 0
  4. a function of pressure
Show the answer

Answer: A. 0

The heat of reaction depends on

  1. dependent on pressure only.
  2. dependent on temperature only.
  3. dependent on both pressure and temperature
  4. independent of temperature changes.
Show the answer

Answer: C. dependent on both pressure and temperature

The second law of thermodynamics deals with

  1. amount of energy transferred.
  2. direction of energy transfer.
  3. irreversible processes only.
  4. non-cyclic processes only.
Show the answer

Answer: B. direction of energy transfer.

At absolute zero, a perfect crystalline substance has an absolute entropy of

  1. zero
  2. negative
  3. more than zero
  4. indeterminate
Show the answer

Answer: A. zero

The Joule–Thomson coefficient is defined as

  1. μ = (∂P/∂T)_H
  2. μ = (∂T/∂P)_H
  3. μ = (∂E/∂T)_H
  4. μ = (∂E/∂P)_H
Show the answer

Answer: B. μ = (∂T/∂P)_H

A Mollier diagram plots

  1. temperature vs. enthalpy
  2. pressure vs. volume
  3. enthalpy vs. entropy
  4. temperature vs. internal energy
Show the answer

Answer: C. enthalpy vs. entropy

Close to their critical temperature, real gases occupy ____ the volume predicted for an ideal gas.

  1. less than
  2. same as
  3. more than
  4. half
Show the answer

Answer: A. less than

Charles’ law can be written as

  1. V/T = Constant.
  2. V ∝ 1/T
  3. V ∝ 1/P
  4. PV/T = Constant
Show the answer

Answer: A. V/T = Constant.

Absolute zero is the temperature of the reservoir to which a Carnot engine would reject

  1. minimum temperature attainable,
  2. temperature of the heat reservoir to which a Carnot engine rejects all the heat that is taken in.
  3. temperature of the heat reservoir to which a Carnot engine rejects no heat.
  4. none of these.
Show the answer

Answer: C. temperature of the heat reservoir to which a Carnot engine rejects no heat.

Entropy is a measure of a system’s

  1. disorder
  2. orderly behaviour
  3. temperature changes only
  4. none of these
Show the answer

Answer: A. disorder

For a spontaneous change in an isolated system, the entropy change dS is

  1. ds = 0
  2. ds < 0
  3. ds > 0
  4. ds = Constant
Show the answer

Answer: C. ds > 0

For a reversible (equilibrium) process in an isolated system, dS is

  1. ds = 0
  2. ds < 0
  3. ds > 0
  4. ds = Constant
Show the answer

Answer: A. ds = 0

P, V, T and S are linked by the ____ relations.

  1. Gibbs-Duhem
  2. Gibbs-Helmholtz
  3. Maxwell's
  4. none of these
Show the answer

Answer: C. Maxwell's

For a process at constant volume,

  1. dE = Cp.dT
  2. dE = Cv.dT
  3. dQ = dE + p.dV
  4. dW = p.dV
Show the answer

Answer: B. dE = Cv.dT

For a reversible process (dW = work done by the system),

  1. Tds = dE + dW
  2. dE - dW = Tds
  3. dW - dE = Tds
  4. Tds - dW + dE > 0
Show the answer

Answer: A. Tds = dE + dW

For an irreversible process (dW = work done by the system),

  1. T dS = dE + dW
  2. T dS > dE + dW
  3. T dS < dE + dW
  4. T dS = 0
Show the answer

Answer: B. T dS > dE + dW

The heat capacity at constant volume, Cv, equals

  1. (∂E/∂T)_v
  2. (∂E/∂V)_T
  3. (∂E/∂P)_v
  4. (∂V/∂T)_p
Show the answer

Answer: A. (∂E/∂T)_v

The third law of thermodynamics deals with

  1. value of absolute entropy.
  2. energy transfer.
  3. direction of energy transfer.
  4. none of these.
Show the answer

Answer: A. value of absolute entropy.

Combining the first and second laws for a closed system of fixed mass gives

  1. dE = Tds - PdV
  2. dQ = CvdT + PdV
  3. dQ = CpdT + Vdp
  4. Tds = dE - PdV
Show the answer

Answer: A. dE = Tds - PdV

The fundamental relation linking T dS, dE and P dV applies to

  1. single phase fluid of varying composition.
  2. single phase fluid of constant composition.
  3. open as well as closed systems.
  4. both (b) and (c)
Show the answer

Answer: D. both (b) and (c)

In an exothermic reaction,

  1. only enthalpy change (ΔH) is negative.
  2. only internal energy change (ΔE) is negative.
  3. both ΔH and ΔE are negative.
  4. enthalpy change is zero
Show the answer

Answer: C. both ΔH and ΔE are negative.

The enthalpy change of a reaction is the same whatever route is followed. This is known as ____ law.

  1. Hess's
  2. Kirchoff's
  3. Lavosier and Laplace.
  4. none of these
Show the answer

Answer: A. Hess's

The heat released when one mole of a compound burns completely in oxygen at constant pressure is its

  1. calorific value
  2. heat of reaction
  3. heat of combustion
  4. heat of formation
Show the answer

Answer: C. heat of combustion

For which reaction is the rate independent of reactant concentration?

  1. zero order
  2. third order
  3. consecutive
  4. none of these
Show the answer

Answer: A. zero order

Which of these is NOT a valid unit for reaction rate?

  1. Moles formed/(surface of catalyst)(time)
  2. Moles formed/(volume of reactor)(time)
  3. Mole formed/(volume of catalyst)(time)
  4. None of these
Show the answer

Answer: D. None of these

For a reaction of order n, the rate constant has units of

  1. 1/((time)(concentration)^(n-1))
  2. (time)⁻¹(concentration)^(n-1)
  3. (time)^(n-1)(concentration)
  4. none of these
Show the answer

Answer: A. 1/((time)(concentration)^(n-1))

In a very fast heterogeneous reaction, the controlling factor is usually

  1. Heat and mass transfer effects
  2. Pressure
  3. Temperature
  4. Composition of reactant
Show the answer

Answer: A. Heat and mass transfer effects

The rate of a homogeneous reaction depends on

  1. pressure and temperature only.
  2. temperature and composition only.
  3. pressure and composition only.
  4. pressure, temperature and composition.
Show the answer

Answer: D. pressure, temperature and composition.

In a multi-step reaction with steps in series, the rate-determining step is the

  1. fastest
  2. slowest
  3. intermediate
  4. data insufficient; can't be predicted
Show the answer

Answer: B. slowest

Chemical kinetics can tell us the ____ of a reaction.

  1. rate
  2. feasibility
  3. both (a) and (b)
  4. neither (a) nor (b)
Show the answer

Answer: A. rate

The speed of a chemical reaction

  1. decreases with increase in temperature.
  2. increases with increase in pressure of reactants for all reactions.
  3. decreases with increase of reactant concentration.
  4. none of these.
Show the answer

Answer: D. none of these.

The sum of the exponents of concentrations in a rate law is the

  1. order
  2. overall order
  3. molecularity
  4. none of these
Show the answer

Answer: B. overall order

The molecularity of a reaction

  1. is always equal to the overall order of reaction.
  2. may not be equal to the order of reaction.
  3. can't have a fractional value.
  4. both (b) and (c).
Show the answer

Answer: D. both (b) and (c).

For a first-order reaction with initial concentration a and amount x reacted by time t,

  1. k.t = ln(a/(a-x))
  2. k.t = x/(a(a-x))
  3. k.t = ln((a-x)/a)
  4. k.t = a(a-x)/x
Show the answer

Answer: A. k.t = ln(a/(a-x))

The half-life of a reaction is

  1. the time required to reduce the concentration of the reacting substance to half its initial value.
  2. inversely proportional to the rate constant for all reactions.
  3. independent of the initial concentration for first order reaction.
  4. none of these.
Show the answer

Answer: A. the time required to reduce the concentration of the reacting substance to half its initial value.

For a first-order reaction, the half-life is ____ the initial concentration.

  1. directly proportional to
  2. inversely proportional to
  3. independent of
  4. none of these
Show the answer

Answer: C. independent of

In a first-order reaction, the time to go from 1 mol/L to 0.5 mol/L, compared with the time to go from 10 mol/L to 5 mol/L, is

  1. more than
  2. less than
  3. same as
  4. data insufficient; can't be predicted.
Show the answer

Answer: C. same as

The specific rate constant of a second-order reaction

  1. is independent of temperature.
  2. varies with temperature.
  3. depends on the nature of the reactants.
  4. both (b) and (c).
Show the answer

Answer: D. both (b) and (c).

A reaction whose rate law follows directly from its stoichiometric equation is called

  1. elementary
  2. non-elementary
  3. parallel
  4. autokinetic
Show the answer

Answer: A. elementary

In a zero-order reaction, product concentration rises with

  1. increase of reaction time.
  2. increase in initial concentration.
  3. total pressure.
  4. decrease in total pressure.
Show the answer

Answer: A. increase of reaction time.

The Arrhenius equation describes how ____ changes with temperature.

  1. reaction rate
  2. rate constant
  3. energy of activation
  4. frequency factor
Show the answer

Answer: B. rate constant

The activation energy of a reaction

  1. is same as heat of reaction at constant pressure.
  2. is the minimum energy which the molecules must have before the reaction can take place.
  3. varies as fifth power of the temperature.
  4. both (b) and (c).
Show the answer

Answer: B. is the minimum energy which the molecules must have before the reaction can take place.

According to collision theory, the rate constant of a bimolecular reaction varies with absolute temperature as

  1. k ∝ T^1.5
  2. k ∝ e^(−E/RT) only
  3. k ∝ √T·e^(−E/RT)
  4. k ∝ T
Show the answer

Answer: C. k ∝ √T·e^(−E/RT)

Transition-state theory predicts that the rate constant varies as

  1. k ∝ e^(-E/RT)
  2. k ∝ T·e^(-E/RT)
  3. k ∝ √T
  4. k ∝ T^1.5
Show the answer

Answer: B. k ∝ T·e^(-E/RT)

Reactions with a high activation energy are

  1. very temperature sensitive
  2. temperature insensitive
  3. always irreversible
  4. always reversible
Show the answer

Answer: A. very temperature sensitive

In an autocatalytic reaction,

  1. one of the reactants acts as a catalyst.
  2. one of the products acts as a catalyst.
  3. catalysts have very high selectivity.
  4. no catalyst is used.
Show the answer

Answer: B. one of the products acts as a catalyst.

Raising the temperature of a reversible exothermic reaction makes its equilibrium conversion

  1. decreases
  2. increases
  3. remains unaffected
  4. decreases linearly with temperature
Show the answer

Answer: A. decreases

Lowering the temperature of a reversible endothermic reaction makes its equilibrium conversion

  1. decreases
  2. increases
  3. remains unaffected
  4. increases linearly with temperature
Show the answer

Answer: A. decreases

Adding a catalyst makes the equilibrium constant of a reaction

  1. increases
  2. decreases
  3. remains unaffected
  4. can either increase or decrease (depends on the type of catalyst)
Show the answer

Answer: C. remains unaffected

For which type of reaction does conversion rise as temperature rises?

  1. autocatalytic
  2. irreversible
  3. reversible endothermic
  4. reversible exothermic
Show the answer

Answer: C. reversible endothermic

The heat of a reaction

  1. depends on the pressure only.
  2. depends on the mechanism of reaction only.
  3. depends on both pressure and mechanism of reaction.
  4. is independent of the mechanism of reaction.
Show the answer

Answer: D. is independent of the mechanism of reaction.

Forming a latent image on a photographic plate is an example of a reaction that is

  1. very slow
  2. very fast
  3. photochemical
  4. both (b) and (c)
Show the answer

Answer: D. both (b) and (c)

A trickle-bed reactor

  1. has altogether three streams either entering or leaving.
  2. processes three reactants at different flow rates.
  3. processes three reactants with same flow rate.
  4. employs all the three phases (i.e. solid, liquid and gas).
Show the answer

Answer: D. employs all the three phases (i.e. solid, liquid and gas).

For an elementary reaction, the Arrhenius law gives

  1. k ∝ √T
  2. k ∝ e^(-E/RT)
  3. k ∝ Te^(-E/RT)
  4. none of these
Show the answer

Answer: B. k ∝ e^(-E/RT)

A rate constant that follows the Arrhenius law, when temperature increases,

  1. increases.
  2. decreases.
  3. decreases exponentially.
  4. can either increase or decrease; depends on the frequency factor.
Show the answer

Answer: A. increases.

A batch reactor is marked by

  1. constant residence time.
  2. variation in extent of reaction and properties of the reaction mixture with time.
  3. variation in reactor volume.
  4. very low conversion.
Show the answer

Answer: B. variation in extent of reaction and properties of the reaction mixture with time.

An ideal plug-flow reactor is marked by

  1. high capacity.
  2. complete mixing in the axial direction.
  3. complete mixing across the cross-section (radially) but none along the length.
  4. uniform composition and temperature throughout.
Show the answer

Answer: C. complete mixing across the cross-section (radially) but none along the length.

In a semi-batch reactor,

  1. velocity of reaction can be controlled.
  2. maximum conversion can be controlled,
  3. both the reactants flow counter-currently.
  4. residence time is constant.
Show the answer

Answer: A. velocity of reaction can be controlled.

A back-mix reactor is

  1. is same as plug-flow reactor.
  2. is same as ideal stirred tank reactor.
  3. employs mixing in axial direction only.
  4. is most suitable for gas phase reaction.
Show the answer

Answer: B. is same as ideal stirred tank reactor.

In a continuous stirred-tank reactor, the outlet stream composition

  1. is same as that in the reactor.
  2. is different than that in the reactor.
  3. depends upon the flow rate of inlet stream.
  4. none of these.
Show the answer

Answer: A. is same as that in the reactor.

An ideal tubular flow reactor has

  1. there is no mixing in longitudinal direction.
  2. mixing takes place in radial direction.
  3. there is a uniform velocity across the radius.
  4. all (a), (b) and (c).
Show the answer

Answer: D. all (a), (b) and (c).

Space velocity

  1. describes the extensive operating characteristics of a tubular flow reactor.
  2. is the maximum feed rate per unit volume of reactor for a given conversion.
  3. is a measure of the ease of the reaction.
  4. all (a), (b) and (c)
Show the answer

Answer: D. all (a), (b) and (c)

A high space velocity indicates that

  1. reaction can be accomplished with small reactor.
  2. conversion can be obtained with a high feed rate.
  3. both (a) and (b).
  4. none of these.
Show the answer

Answer: C. both (a) and (b).

The space time of a flow reactor

  1. usually equal to the residence time.
  2. the reciprocal of the space velocity.
  3. a measure of its capacity.
  4. both (a) and (b).
Show the answer

Answer: D. both (a) and (b).

A flow reactor has a space time of 3 h. This means

  1. the time required to process one reactor volume of feed (measured at specified conditions) is 3 hours.
  2. three reactor volumes of feed can be processed every hour.
  3. it takes three hours to dump the entire volume of the reactor with feed.
  4. conversion is cent per cent after three hours.
Show the answer

Answer: A. the time required to process one reactor volume of feed (measured at specified conditions) is 3 hours.

Space time and mean residence time are equal

  1. when the density of the reaction mixture is constant.
  2. for large diameter tubular reactor.
  3. for narrow diameter tubular reactor.
  4. for CSTR.
Show the answer

Answer: A. when the density of the reaction mixture is constant.

A batch reactor is best suited to

  1. suitable for gas-phase reactions on commercial scale.
  2. suitable for liquid phase reactions involving small production rate.
  3. least expensive to operate for a given rate.
  4. most suitable for very large production rate.
Show the answer

Answer: B. suitable for liquid phase reactions involving small production rate.

Which reactor suits a gas-phase reaction at very high pressure?

  1. Batch reactor
  2. Tubular flow reactor
  3. Stirred tank reactor
  4. Fluidised bed reactor
Show the answer

Answer: B. Tubular flow reactor

A slow liquid-phase reaction that must be kept almost isothermal is best run in a

  1. stirred tank
  2. tubular flow
  3. batch
  4. fixed bed
Show the answer

Answer: A. stirred tank

With the same total residence time, which arrangement gives the highest conversion for a positive-order reaction?

  1. Single stirred tank (v = 5 litres).
  2. Two stirred tank (each of 2.5 litres) in series.
  3. Stirred tank followed by tubular flow reactor (each of 2.5 litres).
  4. Single tubular flow reactor (v = 5 litres).
Show the answer

Answer: D. Single tubular flow reactor (v = 5 litres).

Vegetable oil is hydrogenated over nickel in a ____ reactor.

  1. batch
  2. slurry
  3. fluidised bed
  4. fixed bed
Show the answer

Answer: B. slurry

A second-order reaction A + B → C behaves like a pseudo-first-order reaction when

  1. C_A0 = C_B0
  2. C_A0 ≫ C_B0
  3. C_B0 ≫ C_A0
  4. C_B0 = 0
Show the answer

Answer: C. C_B0 ≫ C_A0

A first-order irreversible reaction A → B runs for the same time in a constant-volume and in a variable-volume reactor. Then

  1. both conversion as well as concentration are same
  2. conversion in both will be the same but concentrations will be different
  3. both the conversion as well as concentrations will be different
  4. none of these.
Show the answer

Answer: B. conversion in both will be the same but concentrations will be different

A space velocity of 5 h⁻¹ means

  1. five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour.
  2. after every 5 hours, reactor is being filled with the feed.
  3. cent per cent conversion can be achieved in at least 5 hours.
  4. a fixed conversion of a given batch of feed takes 5 hours.
Show the answer

Answer: A. five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour.

In a steadily operating CSTR, which of these changes with time?

  1. reaction rate
  2. concentration
  3. both (a) and (b)
  4. neither (a) nor (b)
Show the answer

Answer: D. neither (a) nor (b)

For any positive reaction order,

  1. mixed reactor is always larger than the plug-flow reactor.
  2. ratio of the volume of the mixed reactor to that of the plug-flow reactor decreases with order.
  3. reactor size is independent of the type of flow.
  4. density variation during reaction affects design.
Show the answer

Answer: A. mixed reactor is always larger than the plug-flow reactor.

The reaction 2A → B is run in a CSTR and in a plug-flow reactor of equal volume with the same feed. Conversion is

  1. higher in P.F. reactor
  2. higher in CSTR
  3. same in both the reactors
  4. data insufficient; can't be predicted
Show the answer

Answer: A. higher in P.F. reactor

Which reactor arrangement suits an autocatalytic reaction best?

  1. P.F. reactors in series.
  2. CSTR in series.
  3. CSTR followed by P.F. reactor.
  4. P.F. reactor followed by CSTR.
Show the answer

Answer: C. CSTR followed by P.F. reactor.

For a first-order reaction in two CSTRs of unequal size in series,

  1. Large reactor followed by smaller one.
  2. Smaller reactor followed by larger one.
  3. Either of the arrangement (a) or (b) will give the same yield.
  4. Data insufficient, can't be predicted.
Show the answer

Answer: C. Either of the arrangement (a) or (b) will give the same yield.

For a first-order reaction in two equal CSTRs, conversion is

  1. less when they are connected in series.
  2. more when they are connected in series.
  3. more when they are connected in parallel.
  4. same whether they are connected in series or in parallel.
Show the answer

Answer: B. more when they are connected in series.

In a first-order reaction A → B, the concentration of A falls

  1. linearly with time.
  2. exponentially with time.
  3. very abruptly towards the end of the reaction.
  4. logarithmically with time.
Show the answer

Answer: B. exponentially with time.

Which reactor makes isothermal operation easiest?

  1. Batch reactor
  2. Back-mix reactor
  3. Plug-flow reactor
  4. Fixed bed reactor
Show the answer

Answer: B. Back-mix reactor

Increasing the space time of an isothermal irreversible reaction in a plug-flow reactor makes conversion

  1. increase
  2. decrease
  3. remain same
  4. data is insufficient; can't be predicted
Show the answer

Answer: A. increase

Reactors operating in parallel perform best when

  1. space time for each parallel line is same.
  2. space time for parallel lines is different.
  3. larger reactors have more space time compared to smaller ones.
  4. none of these.
Show the answer

Answer: A. space time for each parallel line is same.

Back-mixing is greatest in

  1. a well stirred batch reactor.
  2. a plug-flow reactor.
  3. a single CSTR.
  4. CSTR's connected in series.
Show the answer

Answer: C. a single CSTR.

Moles of reactant forming the desired product divided by moles forming unwanted product is called

  1. operational yield
  2. relative yield
  3. selectivity
  4. none of these
Show the answer

Answer: C. selectivity

A cascade of CSTRs can be made to perform better by

  1. a P.F. reactor in series.
  2. a P.F. reactor in parallel.
  3. more CSTR's in series.
  4. more CSTR's in parallel.
Show the answer

Answer: C. more CSTR's in series.

An autothermal reactor

  1. most suitable for a second order reaction.
  2. most suitable for a reversible reaction.
  3. completely self-supporting in its thermal energy requirements.
  4. isothermal in nature.
Show the answer

Answer: C. completely self-supporting in its thermal energy requirements.

For reactions in series, the relative yield

  1. is always greater for plug-flow reactor than for the single CSTR of the same volume.
  2. statement in (a) is wrong.
  3. decreases with increasing conversion.
  4. both (a) and (c) hold good.
Show the answer

Answer: D. both (a) and (c) hold good.

For parallel reactions A → P (wanted) and A → Q (unwanted), when the wanted reaction has the higher order,

  1. batch reactor is preferred over a single CSTR for high yield.
  2. tubular reactor is preferred over a single CSTR for high yield.
  3. both (a) and (b).
  4. single CSTR is the most suitable.
Show the answer

Answer: C. both (a) and (b).

When all the limiting reactant has been consumed, the operational yield ____ the relative yield.

  1. is greater than
  2. is smaller than
  3. equals
  4. can be either greater or smaller than (depends on the type of reaction)
Show the answer

Answer: C. equals

Which statement about catalysts is wrong?

  1. A catalyst does not alter the final position of equilibrium in a reversible reaction.
  2. A catalyst initiates a reaction.
  3. A catalyst is specific in reaction.
  4. A catalyst remains unchanged in chemical composition at the end of the reaction.
Show the answer

Answer: B. A catalyst initiates a reaction.

The most efficient thermodynamic cycle is the

  1. Diesel
  2. Otto
  3. Rankine
  4. Carnot
Show the answer

Answer: D. Carnot

An engine gives 4 kW output for 10 000 J/s input. Its thermal efficiency is ____ %.

  1. 40
  2. 80
  3. 10
  4. 25
Show the answer

Answer: A. 40

One ton of refrigeration is NOT equal to

  1. 200 BTU/minute
  2. 50 kcal/minute
  3. 50 kJ/sec
  4. 3.5 KW
Show the answer

Answer: C. 50 kJ/sec

Cryogenics deals with temperatures of about

  1. 0°K to 123°K
  2. 0°C to - 123°C
  3. 0°C to - 273°C
  4. 0°K to 273°K
Show the answer

Answer: A. 0°K to 123°K

An internal combustion engine has a thermal efficiency of roughly ____ %.

  1. 8
  2. 35
  3. 65
  4. 80
Show the answer

Answer: B. 35

In a diesel engine, fuel is ignited by

  1. spark
  2. hot compressed air
  3. fuel injection
  4. none of these
Show the answer

Answer: B. hot compressed air

The air–petrol ratio in a car engine is about

  1. 14:1
  2. 22:1
  3. 25:1
  4. 4:1
Show the answer

Answer: A. 14:1

Superheating of steam is carried out at constant

  1. enthalpy
  2. entropy
  3. pressure
  4. volume
Show the answer

Answer: C. pressure

An aftercooler on an air compressor mainly serves to

  1. remove oil vapour or moisture from air.
  2. cool the dry air before use.
  3. reduce the volumetric capacity of receiver.
  4. none of these.
Show the answer

Answer: A. remove oil vapour or moisture from air.

The dryness fraction of completely dry steam is

  1. 0
  2. ∞
  3. 1
  4. 0.5
Show the answer

Answer: C. 1

A two-stage compressor takes air at 1 atm and delivers at 25 atm. The ideal intermediate pressure is about ____ atm.

  1. 5
  2. 10
  3. 15
  4. 20
Show the answer

Answer: A. 5

Throttling saturated steam from 25 kg/cm² to 5 kg/cm² gives ____ steam.

  1. wet
  2. saturated
  3. superheated
  4. none of these
Show the answer

Answer: C. superheated

A fire on fuel-oil lines in a refinery is commonly snuffed out with

  1. foam
  2. steam
  3. water
  4. carbon dioxide
Show the answer

Answer: B. steam

Rate of reaction is defined as:

  1. Change in pressure
  2. Change in temperature
  3. Change in concentration per unit time
  4. Change in volume
Show the answer

Answer: C. Change in concentration per unit time

For rate = k[A]²[B], the overall order is:

  1. 2
  2. 3
  3. 4
  4. 1
Show the answer

Answer: B. 3

Molecularity refers to:

  1. Number of molecules in an elementary step
  2. Rate constant
  3. Order of reaction
  4. Number of products
Show the answer

Answer: A. Number of molecules in an elementary step

Unit of rate constant k for first-order:

  1. L²·mol⁻²·s⁻¹
  2. L·mol⁻¹·s⁻¹
  3. mol·L⁻¹·s⁻¹
  4. s⁻¹
Show the answer

Answer: D. s⁻¹

Unit of k for second-order:

  1. L²·mol⁻²·s⁻¹
  2. L·mol⁻¹·s⁻¹
  3. s⁻¹
  4. mol·L⁻¹·s⁻¹
Show the answer

Answer: B. L·mol⁻¹·s⁻¹

Half-life of a first-order reaction:

  1. Depends on concentration
  2. k/0.693
  3. 0.693/k
  4. 1/k
Show the answer

Answer: C. 0.693/k 0.693/k (independent of initial concentration)

Arrhenius equation:

  1. k = RT/Ea
  2. k = Ea/RT
  3. k = A·exp
  4. k = A·Ea·RT
Show the answer

Answer: C. k = A·exp k = A·exp(−Ea/RT)

Activation energy Ea from:

  1. Slope of ln vs 1/T plot = −Ea/R
  2. Intercept of rate vs [A]
  3. Slope of k vs T
  4. Molecularity
Show the answer

Answer: A. Slope of ln vs 1/T plot = −Ea/R Slope of ln(k) vs 1/T plot = −Ea/R

A catalyst increases rate by:

  1. Changing equilibrium
  2. Increasing activation energy
  3. Raising temperature
  4. Providing alternate pathway with lower activation energy
Show the answer

Answer: D. Providing alternate pathway with lower activation energy

At equilibrium, net rate of reaction:

  1. Constant but non-zero
  2. Maximum
  3. Zero
  4. Minimum
Show the answer

Answer: C. Zero Zero (forward rate = reverse rate)

Equilibrium constant Kc for aA+bB⇌cC+dD:

  1. [A][B]/[C][D]
  2. [C]ᶜ[D]ᵈ /
  3. [C]+[D]/[A]+[B]
  4. None
Show the answer

Answer: B. [C]ᶜ[D]ᵈ / [C]ᶜ[D]ᵈ / ([A]ᵃ[B]ᵇ)

Kp = Kc(RT)^Δn where Δn =

  1. Total moles
  2. Moles of reactants
  3. Moles of gaseous products − reactants
  4. None
Show the answer

Answer: C. Moles of gaseous products − reactants

For exothermic reaction, increasing T:

  1. No effect
  2. Decreases K
  3. Increases K
  4. Doubles K
Show the answer

Answer: B. Decreases K

Integrated rate law first-order: ln[A] =

  1. None
  2. [A]₀ − kt
  3. 1/[A] + kt
  4. ln[A]₀ − kt
Show the answer

Answer: D. ln[A]₀ − kt

Integrated rate law second-order (single reactant):

  1. ln[A] = ln[A]₀ − kt
  2. None
  3. [A] = [A]₀ − kt
  4. 1/[A] = 1/[A]₀ + kt
Show the answer

Answer: D. 1/[A] = 1/[A]₀ + kt

Rate constant approximately doubles every:

  1. 5°C rise
  2. 1°C rise
  3. 10°C rise
  4. 100°C rise
Show the answer

Answer: C. 10°C rise

Rate expression can NOT be determined from:

  1. Experiment
  2. None
  3. Mechanism
  4. Balanced stoichiometric equation alone
Show the answer

Answer: D. Balanced stoichiometric equation alone

Steady-state approximation (SSA) assumes:

  1. None
  2. All concentrations constant
  3. Concentration of reactive intermediate is approximately constant
  4. Equilibrium established
Show the answer

Answer: C. Concentration of reactive intermediate is approximately constant

Rate-determining step is:

  1. The slowest step in a mechanism
  2. The fastest step
  3. The last step
  4. Any step
Show the answer

Answer: A. The slowest step in a mechanism

Chain reactions consist of:

  1. Only initiation
  2. Only propagation
  3. Two steps only
  4. Initiation, propagation, and termination steps
Show the answer

Answer: D. Initiation, propagation, and termination steps

Collision theory steric factor 'p' is:

  1. Probability density
  2. None
  3. Probability of correct orientation
  4. Pressure
Show the answer

Answer: C. Probability of correct orientation

Transition state theory postulates:

  1. No activation needed
  2. Transient activated complex at energy maximum
  3. Equilibrium always reached
  4. None
Show the answer

Answer: B. Transient activated complex at energy maximum

Michaelis-Menten rate at [S] >> Km:

  1. None
  2. Km/Vmax
  3. Vmax
  4. First order in S
Show the answer

Answer: C. Vmax Vmax (zero order in S)

Km approximates:

  1. Maximum rate
  2. [E] concentration
  3. [S] at which rate = Vmax/2
  4. None
Show the answer

Answer: C. [S] at which rate = Vmax/2

Competitive inhibition:

  1. Reduces Km
  2. Both change equally
  3. Reduces Vmax
  4. Km increases, Vmax unchanged
Show the answer

Answer: D. Km increases, Vmax unchanged

Non-competitive inhibition:

  1. Competitive
  2. None
  3. Vmax decreases, Km unchanged
  4. Increases Km
Show the answer

Answer: C. Vmax decreases, Km unchanged

Quantum yield Φ =

  1. Reaction rate/photon energy
  2. None
  3. Rate/photon flux
  4. Molecules reacted / photons absorbed
Show the answer

Answer: D. Molecules reacted / photons absorbed

Half-life of a second-order reaction:

  1. 1/
  2. k/[A]₀
  3. Independent of concentration
  4. 0.693/k
Show the answer

Answer: A. 1/ 1/(k[A]₀) - depends on initial concentration

For first-order: % completion in t = t₁/₂:

  1. 75%
  2. 50%
  3. 36.8%
  4. 63.2%
Show the answer

Answer: B. 50%

Radioactive decay follows:

  1. Zero-order
  2. Third-order
  3. First-order kinetics
  4. Second-order
Show the answer

Answer: C. First-order kinetics

Pseudo-first-order achieved by:

  1. Elevated temperature
  2. Removing catalyst
  3. Using one reactant in large excess
  4. None
Show the answer

Answer: C. Using one reactant in large excess

Temperature coefficient Q₁₀ ≈

  1. 2 (ratio of rate at T+10°C to T)
  2. 5
  3. 10
  4. 0.5
Show the answer

Answer: A. 2 (ratio of rate at T+10°C to T)

Diffusion-controlled reaction rate ≈

  1. None
  2. 10⁸-10¹⁰ L·mol⁻¹·s⁻¹
  3. k depends on Ea only
  4. 10² L·mol⁻¹·s⁻¹
Show the answer

Answer: B. 10⁸-10¹⁰ L·mol⁻¹·s⁻¹

Marcus theory applies to:

  1. Acid-base reactions
  2. Electron transfer reactions
  3. None
  4. Radical reactions
Show the answer

Answer: B. Electron transfer reactions

Hammond postulate states:

  1. Rate equals equilibrium
  2. Transition state resembles nearest stable species in energy
  3. Exothermic reactions always fast
  4. None
Show the answer

Answer: B. Transition state resembles nearest stable species in energy

Langmuir-Hinshelwood mechanism:

  1. Both reactants adsorb then react on surface
  2. No adsorption
  3. None
  4. Only one adsorbs
Show the answer

Answer: A. Both reactants adsorb then react on surface

Large Thiele modulus → effectiveness factor η:

  1. Zero
  2. Unity
  3. Infinite
  4. Small
Show the answer

Answer: D. Small Small (diffusion-limited)

Zero-order reactions occur when:

  1. Pressure is high
  2. Catalyst surface saturated
  3. Temperature is low
  4. None
Show the answer

Answer: B. Catalyst surface saturated

For zero-order, concentration decreases:

  1. Linearly with time
  2. As 1/t
  3. Exponentially
  4. As t²
Show the answer

Answer: A. Linearly with time

Consecutive reactions A→R→S: max [R] when:

  1. k₁[A] = k₂[R]
  2. t=0
  3. [R]=[A]₀
  4. t→∞
Show the answer

Answer: A. k₁[A] = k₂[R]

Overall order can be fractional because:

  1. Complex mechanisms give non-integer rate laws
  2. Orders must be integers
  3. Stoichiometry dictates order
  4. None
Show the answer

Answer: A. Complex mechanisms give non-integer rate laws

SN1 vs SN2 kinetics:

  1. None
  2. Both second order
  3. Both first order
  4. SN1
Show the answer

Answer: D. SN1 SN1: first order; SN2: second order

Primary kinetic isotope effect kH/kD ≈

  1. 1.0
  2. 2-7
  3. < 1
  4. None
Show the answer

Answer: B. 2-7 2-7 (C-H bond breaking)

Ultrafast spectroscopy observes:

  1. Transition states and very fast bond-breaking events
  2. Slow reactions
  3. None
  4. Equilibrium only
Show the answer

Answer: A. Transition states and very fast bond-breaking events

Lindemann-Hinshelwood mechanism explains:

  1. None
  2. Unimolecular dissociation via bimolecular activation
  3. Enzyme kinetics
  4. Chain reactions
Show the answer

Answer: B. Unimolecular dissociation via bimolecular activation

Potential energy surface (PES) minimum energy path passes through:

  1. Energy maximum only
  2. Saddle point
  3. None
  4. Energy minimum
Show the answer

Answer: B. Saddle point Saddle point (transition state)

DFT is used in kinetics to:

  1. Calculate activation energies computationally
  2. None
  3. Determine order experimentally
  4. Measure rates experimentally
Show the answer

Answer: A. Calculate activation energies computationally

CSTR rate of reaction equals:

  1. Average rate
  2. Rate at exit concentration
  3. Rate at inlet
  4. None
Show the answer

Answer: B. Rate at exit concentration Rate at exit concentration (lowest)

Branching chain reaction leads to:

  1. Explosion
  2. Slow reaction
  3. Equilibrium
  4. Steady-state
Show the answer

Answer: A. Explosion Explosion (exponential radical increase)

Flow NMR allows:

  1. Only solid-state
  2. Only static measurements
  3. Real-time monitoring of reaction kinetics
  4. None
Show the answer

Answer: C. Real-time monitoring of reaction kinetics

A reaction with order n=0.5 may arise from:

  1. Integer order always
  2. Dissociation of diatomic reactant followed by slow reaction of atoms
  3. None
  4. Catalytic mechanism
Show the answer

Answer: B. Dissociation of diatomic reactant followed by slow reaction of atoms

Surface reactions on heterogeneous catalyst - adsorption equilibrium constant K:

  1. Langmuir adsorption
  2. Rate constant k
  3. Activation energy
  4. None
Show the answer

Answer: A. Langmuir adsorption Langmuir adsorption: K = k_ads/k_des

Effectiveness factor η = actual rate / intrinsic rate; low η means:

  1. None
  2. Internal mass transfer limitation
  3. Fast reaction
  4. No limitation
Show the answer

Answer: B. Internal mass transfer limitation Internal mass transfer limitation (diffusion in pores limits rate)

External mass transfer (film diffusion) limitation:

  1. None
  2. Concentration gradient in fluid film around particle is rate-limiting
  3. Intrinsic kinetics
  4. Internal diffusion
Show the answer

Answer: B. Concentration gradient in fluid film around particle is rate-limiting

Damköhler number Da =

  1. Dimensionless temperature
  2. Reaction rate / convective transport rate
  3. Pressure ratio
  4. None
Show the answer

Answer: B. Reaction rate / convective transport rate Reaction rate / convective transport rate - high Da means transport-limited

Activation energy of a diffusion-controlled reaction:

  1. None
  2. High
  3. Low compared to kinetics-controlled
  4. Same as kinetics
Show the answer

Answer: C. Low compared to kinetics-controlled Low (~10-20 kJ/mol) compared to kinetics-controlled (~40-200 kJ/mol)

Turnover frequency (TOF) in catalysis:

  1. None
  2. Rate constant
  3. Conversion
  4. Number of reactant molecules converted per active site per second
Show the answer

Answer: D. Number of reactant molecules converted per active site per second

Volcano plot in catalysis:

  1. None
  2. Conversion vs time
  3. Rate vs temperature
  4. Activity vs adsorption energy
Show the answer

Answer: D. Activity vs adsorption energy Activity vs adsorption energy - optimum catalyst binds neither too strong nor too weak

Sabatier principle:

  1. Optimal catalyst has intermediate adsorption energy for reactant
  2. Weakest adsorber best
  3. Strongest adsorber best
  4. None
Show the answer

Answer: A. Optimal catalyst has intermediate adsorption energy for reactant

Michaelis-Menten in heterogeneous catalysis (Langmuir-Hinshelwood):

  1. Independent of P
  2. Linear in P
  3. None
  4. Rate = k·K·P/
Show the answer

Answer: D. Rate = k·K·P/ Rate = k·K·P/(1+KP) - similar form to enzymatic kinetics

Inhibition in heterogeneous catalysis:

  1. No effect
  2. None
  3. Competitive adsorption of inhibitor on active sites reduces rate
  4. Same as poisoning
Show the answer

Answer: C. Competitive adsorption of inhibitor on active sites reduces rate

Deactivation kinetics - first-order deactivation:

  1. None
  2. Linear decay
  3. da/dt = −kd·a where a = activity; exponential decay of activity
  4. Step change
Show the answer

Answer: C. da/dt = −kd·a where a = activity; exponential decay of activity

Coke formation kinetics:

  1. None
  2. Rate of coking ∝ hydrocarbon partial pressure; temperature accelerates coking
  3. Constant rate
  4. Independent of T
Show the answer

Answer: B. Rate of coking ∝ hydrocarbon partial pressure; temperature accelerates coking

Selectivity in parallel reactions improved by:

  1. None
  2. Always low T
  3. Operating at concentration/temperature where desired reaction is faster relative to undesired
  4. Always high T
Show the answer

Answer: C. Operating at concentration/temperature where desired reaction is faster relative to undesired

Isothermal vs adiabatic reactor for exothermic reaction:

  1. Isothermal
  2. Adiabatic always better
  3. No difference
  4. None
Show the answer

Answer: A. Isothermal Isothermal: constant T, higher conversion; adiabatic: T rises, may need multiple stages with cooling

PFR concentration profile for first-order reaction:

  1. Linear
  2. None
  3. Constant
  4. Exponential decay from inlet to outlet
Show the answer

Answer: D. Exponential decay from inlet to outlet Exponential decay from inlet to outlet: CA = CA0·exp(−kτ)

CSTR vs PFR for same conversion:

  1. Same volume
  2. PFR requires smaller volume for positive order reactions
  3. CSTR smaller
  4. Depends on temperature only
Show the answer

Answer: B. PFR requires smaller volume for positive order reactions

Residence time distribution (RTD) E(t) curve:

  1. Not useful
  2. Only for PFR
  3. Characterises mixing in real reactor; deviation from ideal PFR or CSTR shows dead zones/bypassing
  4. None
Show the answer

Answer: C. Characterises mixing in real reactor; deviation from ideal PFR or CSTR shows dead zones/bypassing

Dispersion model for non-ideal flow:

  1. Axial dispersion added to plug flow; Pe_number characterises degree of mixing
  2. Not a real model
  3. None
  4. Only for CSTR
Show the answer

Answer: A. Axial dispersion added to plug flow; Pe_number characterises degree of mixing

Tanks-in-series model:

  1. N CSTRs in series approximates PFR as N→∞; RTD = gamma distribution
  2. Only one CSTR
  3. Only PFR
  4. None
Show the answer

Answer: A. N CSTRs in series approximates PFR as N→∞; RTD = gamma distribution

Induction period in a reaction:

  1. Normal start
  2. Initial delay before reaction rate picks up
  3. None
  4. End of reaction
Show the answer

Answer: B. Initial delay before reaction rate picks up Initial delay before reaction rate picks up - common in autocatalytic and radical chain reactions

Inhibitor in radical chain:

  1. Initiator
  2. None
  3. Catalyst
  4. Terminates chain by reacting with radicals
Show the answer

Answer: D. Terminates chain by reacting with radicals Terminates chain by reacting with radicals - adds induction period

Arrhenius plot - curvature indicates:

  1. Equilibrium
  2. None
  3. Perfect Arrhenius
  4. Non-Arrhenius behaviour
Show the answer

Answer: D. Non-Arrhenius behaviour Non-Arrhenius behaviour - multiple mechanisms, tunnelling, or changing rate-limiting step with T

Quantum tunnelling in reactions:

  1. Only at high T
  2. None
  3. No effect
  4. H atom can tunnel through barrier
Show the answer

Answer: D. H atom can tunnel through barrier H atom can tunnel through barrier - important for H-transfer at low T; explains curved Arrhenius plots

Radical clock reactions:

  1. Slow reactions
  2. None
  3. Known rate reactions used to time fast radical processes
  4. Calibration only
Show the answer

Answer: C. Known rate reactions used to time fast radical processes Known rate reactions used to time fast radical processes (e.g. cyclopropylmethyl ring opening)

Competitive kinetics method:

  1. Two reactions compete for same reactant; product ratio gives relative rate constants
  2. Absolute rate measurement
  3. Equilibrium method
  4. None
Show the answer

Answer: A. Two reactions compete for same reactant; product ratio gives relative rate constants

Kinetic vs thermodynamic control:

  1. Same at all T
  2. Kinetic always wins
  3. Kinetic
  4. None
Show the answer

Answer: C. Kinetic Kinetic: faster-forming (lower Ea) product dominates at low T; thermodynamic: more stable product at high T/equilibrium

Baldwin's rules:

  1. None
  2. Rate law prediction
  3. Predict favoured ring-closure reactions based on ring size, endo/exo, tet/trig/dig
  4. Predict acidity
Show the answer

Answer: C. Predict favoured ring-closure reactions based on ring size, endo/exo, tet/trig/dig

RRKM unimolecular rate k(E):

  1. Rate at specific internal energy E
  2. Average rate only
  3. None
  4. Thermal only
Show the answer

Answer: A. Rate at specific internal energy E Rate at specific internal energy E - statistical theory using phase space (microcanonical)

Pressure effect on reaction rate:

  1. None
  2. Always increases rate
  3. High pressure accelerates reactions with negative ΔV‡
  4. No effect
Show the answer

Answer: C. High pressure accelerates reactions with negative ΔV‡ High pressure accelerates reactions with negative ΔV‡ (e.g. cycloadditions) - activation volume

Volume of activation ΔV‡:

  1. Always negative
  2. No pressure effect
  3. None
  4. ΔV‡ = −RT_T
Show the answer

Answer: D. ΔV‡ = −RT_T ΔV‡ = −RT(∂ln k/∂P)_T - positive ΔV‡ means rate decreases with pressure

Solvent cage effect:

  1. None
  2. Solvent irrelevant
  3. Radical pairs born in same solvent cage can recombine before diffusing apart
  4. Cage prevents all reactions
Show the answer

Answer: C. Radical pairs born in same solvent cage can recombine before diffusing apart Radical pairs born in same solvent cage can recombine before diffusing apart - geminate recombination

Chemiluminescence kinetics:

  1. Only thermal emission
  2. None
  3. Excited state product decays emitting light
  4. No light in reactions
Show the answer

Answer: C. Excited state product decays emitting light Excited state product decays emitting light - rate of emission measures reaction rate (e.g. luminol)

NMR line-broadening for exchange rate:

  1. Exchange rate k = π·Δν when NMR peaks start coalescing
  2. None
  3. Only structure
  4. No rate information
Show the answer

Answer: A. Exchange rate k = π·Δν when NMR peaks start coalescing Exchange rate k = π·Δν when NMR peaks start coalescing - gives k at coalescence temperature

Surface science - TPD (Temperature Programmed Desorption):

  1. Catalyst synthesis
  2. Adsorption rate
  3. Measures desorption activation energy from rate vs T during linear heating
  4. None
Show the answer

Answer: C. Measures desorption activation energy from rate vs T during linear heating Measures desorption activation energy from rate vs T during linear heating - characterises adsorption

Microkinetic modelling:

  1. Empirical rate law only
  2. Full set of elementary steps with rate constants
  3. None
  4. Equilibrium only
Show the answer

Answer: B. Full set of elementary steps with rate constants Full set of elementary steps with rate constants - predicts TOF, selectivity, surface coverages

In operando spectroscopy:

  1. Monitoring catalyst/reaction state under actual reaction conditions using XRD/IR/Raman
  2. Only ex situ
  3. None
  4. Only model conditions
Show the answer

Answer: A. Monitoring catalyst/reaction state under actual reaction conditions using XRD/IR/Raman Monitoring catalyst/reaction state under actual reaction conditions (pressure, T) using XRD/IR/Raman

DKR (Dynamic Kinetic Resolution):

  1. None
  2. Racemisation of substrate combined with kinetic resolution
  3. Static kinetic resolution
  4. No selectivity
Show the answer

Answer: B. Racemisation of substrate combined with kinetic resolution Racemisation of substrate combined with kinetic resolution - gives 100% yield of one enantiomer

Asymmetric catalysis kinetics:

  1. None
  2. No selectivity
  3. Achiral only
  4. Enantioselective catalyst
Show the answer

Answer: D. Enantioselective catalyst Enantioselective catalyst - energy difference between diastereomeric TS determines ee

Enzyme inhibition - IC50:

  1. 100% inhibition conc
  2. None
  3. Concentration of inhibitor giving 50% inhibition
  4. Km value
Show the answer

Answer: C. Concentration of inhibitor giving 50% inhibition Concentration of inhibitor giving 50% inhibition - measures inhibitor potency

Cooperativity in enzyme kinetics:

  1. Michaelis-Menten curve
  2. Inhibition curve
  3. None
  4. Sigmoidal v vs [S] curve
Show the answer

Answer: D. Sigmoidal v vs [S] curve Sigmoidal v vs [S] curve - Hill equation; positive cooperativity means binding facilitates further binding

Ping-pong (double displacement) mechanism:

  1. Compulsory order
  2. None
  3. Sequential mechanism
  4. First substrate binds and product leaves; then second substrate binds
Show the answer

Answer: D. First substrate binds and product leaves; then second substrate binds First substrate binds and product leaves; then second substrate binds - enzyme form changes

Induced fit model (Koshland):

  1. No conformational change
  2. Substrate binding induces conformational change in enzyme
  3. Lock and key
  4. None
Show the answer

Answer: B. Substrate binding induces conformational change in enzyme Substrate binding induces conformational change in enzyme - better explanation than lock-and-key

Allosteric regulation:

  1. Competitive inhibition
  2. Active site binding
  3. None
  4. Effector binds at site other than active site
Show the answer

Answer: D. Effector binds at site other than active site Effector binds at site other than active site - changes enzyme activity (activator or inhibitor)

Steady-state approximation validity:

  1. Only at equilibrium
  2. Always valid
  3. Valid when intermediate is reactive and present in low concentration
  4. None
Show the answer

Answer: C. Valid when intermediate is reactive and present in low concentration Valid when intermediate is reactive and present in low concentration - [intermediate] << [reactants]

Relaxation kinetics - relaxation time τ:

  1. None
  2. Only reverse rate
  3. For A ⇌ B
  4. Only forward rate
Show the answer

Answer: C. For A ⇌ B For A ⇌ B: 1/τ = k_f + k_r - sum of forward and reverse rate constants

Photoisomerisation kinetics:

  1. No kinetics
  2. cis-trans isomerisation by light
  3. None
  4. Thermal isomerisation
Show the answer

Answer: B. cis-trans isomerisation by light cis-trans isomerisation by light - quantum yield determines efficiency

Electrochemical kinetics - Butler-Volmer:

  1. Current density depends on overpotential η
  2. No overpotential effect
  3. Linear always
  4. None
Show the answer

Answer: A. Current density depends on overpotential η Current density depends on overpotential η: i = i₀[exp(αFη/RT) − exp(−(1−α)Fη/RT)]

Exchange current density i₀:

  1. Rate of electrode reaction at equilibrium
  2. Maximum current
  3. None
  4. Limiting current
Show the answer

Answer: A. Rate of electrode reaction at equilibrium Rate of electrode reaction at equilibrium (equal forward and reverse) - measure of electrode activity

Tafel equation:

  1. At large overpotential
  2. Linear range
  3. None
  4. Butler-Volmer full
Show the answer

Answer: A. At large overpotential At large overpotential: η = a + b·log|i| - used to find α and i₀ from experimental data

Diffusion limitation in electrochemistry:

  1. Limiting current when mass transport of reactant to electrode is rate-limiting
  2. Kinetic limitation
  3. No limitation
  4. None
Show the answer

Answer: A. Limiting current when mass transport of reactant to electrode is rate-limiting

Enzyme immobilisation benefit:

  1. R
  2. "
  3. [
  4. e
Show the answer

Answer: C. [

Polymerase Chain Reaction (PCR) kinetics:

  1. [
  2. "
  3. E
  4. x
Show the answer

Answer: A. [

RNA interference (RNAi) kinetics:

  1. s
  2. [
  3. "
  4. i
Show the answer

Answer: B. [

Bioluminescence reaction:

  1. u
  2. "
  3. [
  4. L
Show the answer

Answer: C. [

Atmospheric chemistry - OH radical:

  1. P
  2. "
  3. [
  4. r
Show the answer

Answer: C. [

Photocatalytic water splitting:

  1. "
  2. [
  3. S
  4. e
Show the answer

Answer: B. [

CO₂ electroreduction kinetics:

  1. [
  2. O
  3. "
  4. C
Show the answer

Answer: A. [

Biocatalysis vs chemical catalysis rate:

  1. E
  2. "
  3. n
  4. [
Show the answer

Answer: D. [

Kinetic resolution of racemates:

  1. "
  2. h
  3. [
  4. C
Show the answer

Answer: C. [

Isothermal calorimetry for kinetics:

  1. [
  2. "
  3. M
  4. e
Show the answer

Answer: A. [

Stopped-flow half-life determination:

  1. [
  2. i
  3. "
  4. M
Show the answer

Answer: A. [

Online HPLC in flow chemistry:

  1. e
  2. R
  3. [
  4. "
Show the answer

Answer: C. [

Arrhenius compensation effect:

  1. [
  2. L
  3. i
  4. "
Show the answer

Answer: A. [

Photosensitiser quenching:

  1. E
  2. "
  3. [
  4. x
Show the answer

Answer: C. [

Kinetics of radical polymerisation initiation:

  1. i
  2. [
  3. R
  4. "
Show the answer

Answer: B. [

Turnover number (TON) in catalysis:

  1. None
  2. Same as TOF
  3. Rate constant
  4. Total moles of product per mole of catalyst before deactivation
Show the answer

Answer: D. Total moles of product per mole of catalyst before deactivation Total moles of product per mole of catalyst before deactivation - measures catalyst lifetime

Sabatier volcano plot peak:

  1. No optimum
  2. None
  3. Optimal binding energy
  4. Always strong binding
Show the answer

Answer: C. Optimal binding energy Optimal binding energy - too strong: blocked active site; too weak: no activation

The practice questions were written for this studio; they are not copied from ASTU papers. ASTU publishes no topic syllabus for these exams, so the topics are an informed guide based on diploma courses, not an official list.

Practise and take a mock test →