Crude oil, refining processes and products
Topics: Composition and classification of crude oil, atmospheric and vacuum distillation, products (LPG, gasoline, kerosene, diesel, lube oil, bitumen), octane and cetane numbers, cracking (thermal, catalytic, hydrocracking), reforming, alkylation, isomerisation, polymerisation, coking, visbreaking, treating (hydrotreating, sweetening), petrochemicals from naphtha (ethylene, propylene, aromatics).
Crude oil and its distillation
Crude oil is a mixture of hydrocarbons (paraffins, naphthenes, aromatics) with sulphur, nitrogen and metal compounds. API gravity = 141.5/SG − 131.5: light crudes have high API. Atmospheric distillation separates gas, naphtha, kerosene, diesel and residue; the residue goes to a vacuum column to recover heavy gas oils without cracking them.
- °API = 141.5/SG − 131.5
- Atmospheric then vacuum distillation
- Products from light to heavy: LPG → bitumen
Example: A crude has SG 0.85. Find its API gravity.
- °API = 141.5/0.85 − 131.5.
- ≈ 35 °API (a light-to-medium crude).
Answer: ≈ 35 °API
Example: Why is the atmospheric residue distilled under vacuum?
- Its components boil above the temperature where they start to crack.
- Lower pressure lowers the boiling points, so they distil without cracking.
Answer: To avoid thermal cracking
Conversion processes
Cracking breaks large molecules: thermal cracking and visbreaking by heat; fluid catalytic cracking (FCC) over zeolite catalyst gives high-octane gasoline; hydrocracking uses hydrogen and gives clean middle distillates. Coking turns residue into coke and lighter products.
Catalytic reforming (platinum catalyst) turns naphtha into aromatics, raising octane and yielding hydrogen; alkylation joins isobutane and olefins into high-octane alkylate; isomerisation turns straight chains into branched ones.
- FCC: zeolite, makes gasoline
- Reforming: Pt catalyst, aromatics, H₂
- Branched and aromatic = higher octane
Example: Which refinery process makes aromatics and hydrogen from naphtha?
- Dehydrogenation of naphthenes over platinum produces aromatics and H₂.
- This is catalytic reforming.
Answer: Catalytic reforming
Example: A fuel knocks like a blend of 70 % iso-octane and 30 % n-heptane. What is its octane number?
- Octane number = % iso-octane in the matching reference blend.
- 70.
Answer: 70
Products, specifications and treating
Petrol is rated by octane number (resistance to knocking); diesel by cetane number (ease of self-ignition; BS-VI diesel requires at least 51). Kerosene by smoke point; lubricating oils by viscosity index; bitumen by penetration.
Treating removes impurities: hydrodesulphurisation (R–SH + H₂ → R–H + H₂S) for low-sulphur fuels (BS-VI allows 10 ppm sulphur), sweetening converts mercaptans, and amine units remove H₂S from gas.
- Petrol: octane; diesel: cetane
- BS-VI: 10 ppm sulphur
- HDS: R–SH + H₂ → R–H + H₂S
Example: Write the hydrodesulphurisation reaction of a mercaptan.
- Hydrogen breaks the C–S bond over a Co–Mo catalyst.
- R–SH + H₂ → R–H + H₂S.
Answer: R–SH + H₂ → R–H + H₂S
Crude oil is a mixture of paraffins, naphthenes and aromatics with sulphur, nitrogen and metals. Atmospheric distillation splits it into gases, naphtha, kerosene, diesel and a residue that is further distilled under vacuum to recover lube stocks without cracking. Catalytic cracking (FCC, zeolite catalyst) breaks heavy gas oil into gasoline; catalytic reforming over Pt converts low-octane naphtha into high-octane reformate rich in aromatics and produces hydrogen. Octane number rates a petrol’s resistance to knock against iso-octane (100) and n-heptane (0); cetane number rates diesel ignition quality against cetane (100). Hydrotreating removes sulphur as H₂S. Steam cracking of naphtha gives ethylene and propylene for polymers.
- Aromatics and branched paraffins have high octane; straight-chain paraffins high cetane.
- Visbreaking mildly cracks residue to reduce viscosity.
- LPG is mainly propane and butane.
- Flash point: lowest temperature at which vapours ignite momentarily; pour point: lowest temperature at which oil flows.
- API gravity = 141.5/SG − 131.5.
Key formulas
- °API = 141.5/SG − 131.5
- Octane: iso-octane = 100, n-heptane = 0
Practice questions
The octane number of iso-octane is
- 0
- 50
- 100
- 120
Show the answer
Answer: C. 100 Reference fuel.
Catalytic reforming increases
- cetane number
- octane number
- viscosity
- sulphur
Show the answer
Answer: B. octane number Aromatics formed.
Vacuum distillation is used to
- crack heavy oil
- distil heavy residue without cracking
- remove sulphur
- make LPG
Show the answer
Answer: B. distil heavy residue without cracking Lower boiling points.
LPG mainly contains
- methane
- propane and butane
- octane
- ethane
Show the answer
Answer: B. propane and butane C₃/C₄.
The FCC catalyst is
- platinum
- zeolite
- nickel
- iron
Show the answer
Answer: B. zeolite Acidic zeolite.
Hydrotreating removes sulphur as
- SO₂
- H₂S
- H₂SO₄
- elemental S
Show the answer
Answer: B. H₂S Hydrodesulphurisation.
Cetane number indicates
- knock resistance of petrol
- ignition quality of diesel
- viscosity
- flash point
Show the answer
Answer: B. ignition quality of diesel Diesel quality.
A higher API gravity means the crude is
- heavier
- lighter
- more viscous
- more sulphurous
Show the answer
Answer: B. lighter Inverse of SG.
Ethylene is mainly produced by
- catalytic reforming
- steam cracking
- alkylation
- coking
Show the answer
Answer: B. steam cracking Naphtha/ethane cracking.
The lowest temperature at which an oil will flow is its
- flash point
- fire point
- pour point
- cloud point
Show the answer
Answer: C. pour point Definition.
Gasohol, used widely in Brazil, is alcohol blended with
- petrol.
- LPG.
- light hydrocarbon gases (e.g. butane or propane).
- none of these.
Show the answer
Answer: A. petrol.
The main constituent of natural gas is
- CH₄
- C₂H₂
- C₂H₄
- C₃H₆
Show the answer
Answer: A. CH₄
LPG is short for
- liquid petroleum gas
- liquefied petrol gas
- liquid petrol gas
- liquefied petroleum gas
Show the answer
Answer: D. liquefied petroleum gas
“Sweetening” a petroleum product means removing
- sulphur and its compounds
- water
- organic impurities
- wax
Show the answer
Answer: A. sulphur and its compounds
A “sour” crude is one that contains
- asphalt
- sulphur compounds
- wax
- nitrogen compounds
Show the answer
Answer: B. sulphur compounds
The octane number of petrol measures its
- knocking tendency.
- ignition delay.
- ignition temperature.
- smoke point.
Show the answer
Answer: A. knocking tendency.
On the octane scale, n-heptane is rated
- 100
- 0
- 70
- ∞
Show the answer
Answer: B. 0
Tetra-ethyl lead was added to petrol to
- increase its smoke point.
- reduce gum formation.
- reduce the pour point.
- increase its octane number.
Show the answer
Answer: D. increase its octane number.
The cetane number of diesel measures its
- ignition delay
- smoke point
- viscosity
- oxidation stability
Show the answer
Answer: A. ignition delay
Good burning kerosene should have a
- low smoke point.
- high smoke point.
- high aromatics content.
- low paraffins content.
Show the answer
Answer: B. high smoke point.
Aviation gasoline can have an octane rating of
- 79
- 87
- 97
- >100
Show the answer
Answer: D. >100
The viscosity index of a lubricating oil
- is the measure of its flash point.
- is the measure of variation of viscosity with temperature.
- should be low.
- none of these.
Show the answer
Answer: B. is the measure of variation of viscosity with temperature.
The pour point of a petroleum fuel is reported as a
- multiple of 3°F.
- multiple of 5°F.
- 5°C below the temperature at which oil ceases to flow.
- none of these.
Show the answer
Answer: B. multiple of 5°F.
The flash point of an oil is found with the
- Pensky Martens apparatus.
- Ramsbottom apparatus.
- Saybolt viscometer.
- Conradson apparatus.
Show the answer
Answer: A. Pensky Martens apparatus.
Reid vapour pressure of petrol indicates its
- pour point
- cloud point
- vapour locking tendency
- carbon residue
Show the answer
Answer: C. vapour locking tendency
Sulphur in petrol
- leads to corrosion.
- increases lead susceptibility.
- decreases gum formation.
- helps during stabilisation.
Show the answer
Answer: A. leads to corrosion.
A crude topping (atmospheric distillation) column runs at about ____ pressure.
- atmospheric
- 10 atm
- vacuum
- 3 atm.
Show the answer
Answer: A. atmospheric
The main purpose of cracking is to make more
- gasoline
- lube oil
- petrolatum
- coke
Show the answer
Answer: A. gasoline
Thermal cracking is
- an exothermic reaction.
- an endothermic reaction.
- favoured at very low temperature.
- none of these.
Show the answer
Answer: B. an endothermic reaction.
Visbreaking
- uses natural gas as feed.
- is carried out at atmospheric pressure.
- produces fuel oil of lower viscosity.
- produces gasoline only.
Show the answer
Answer: C. produces fuel oil of lower viscosity.
In catalytic cracking, the gasoline produced
- gasoline obtained has a very low octane number.
- pressure and temperature is very high.
- gasoline obtained has very high aromatic content.
- gasoline obtained has very high amount of gum forming compounds.
Show the answer
Answer: C. gasoline obtained has very high aromatic content.
The catalyst for catalytic cracking is typically
- silica-alumina
- silica gel
- vanadium pentoxide
- nickel
Show the answer
Answer: A. silica-alumina
Catalytic reforming mainly converts
- olefins into paraffins
- naphthenes into aromatics
- naphthenes into olefins.
- naphthenes into paraffin.
Show the answer
Answer: B. naphthenes into aromatics
The catalyst for catalytic reforming is
- platinum on alumina
- nickel
- iron
- aluminium chloride
Show the answer
Answer: A. platinum on alumina
The usual feed to a reformer is
- naphtha or straight run gasoline.
- reduced crude.
- vacuum gas oil.
- atmospheric gas oil.
Show the answer
Answer: A. naphtha or straight run gasoline.
Alkylation
- causes olefins to combine with each other.
- causes olefins to combine with iso-paraffins.
- converts iso-paraffin into olefin.
- converts olefin into paraffin.
Show the answer
Answer: B. causes olefins to combine with iso-paraffins.
A catalyst used in refinery alkylation is
- sulphuric acid
- nickel
- silica gel
- alumina
Show the answer
Answer: A. sulphuric acid
Isomerisation turns ____ into iso-paraffins.
- n-paraffins
- olefins
- naphthenes
- none of these
Show the answer
Answer: A. n-paraffins
The solvent used for deasphalting is
- furfurol
- phenol
- propane
- hexane
Show the answer
Answer: C. propane
Which fraction of crude carries the most sulphur?
- Diesel
- Gasoline
- Naphtha
- Atmospheric residue
Show the answer
Answer: D. Atmospheric residue
The most common dewaxing solvent is
- methyl-ethyl-ketone (MEK)
- naphtha
- petroleum ether
- sodium plumbite
Show the answer
Answer: A. methyl-ethyl-ketone (MEK)
The Doctor treatment for mercaptans uses
- sodium hydroxide
- sodium plumbite
- cupric chloride
- potassium isobutyrate
Show the answer
Answer: B. sodium plumbite
On the cetane scale, alpha-methyl naphthalene is rated
- 0
- 100
- 50
- ∞
Show the answer
Answer: A. 0
A more viscous lubricating oil usually has
- lower Reid vapour pressure.
- higher acid number.
- higher flash point and fire point.
- lower flash point and fire point.
Show the answer
Answer: C. higher flash point and fire point.
Stabilising gasoline means
- removal of dissolved gases from it.
- increasing its oxidation stability.
- improving its lead susceptibility.
- increasing its vapour pressure.
Show the answer
Answer: A. removal of dissolved gases from it.
Gum forms in stored petrol mainly through
- alkylation of unsaturates.
- presence of sulphur.
- oxidation and polymerisation of unsaturates.
- higher aromatic content.
Show the answer
Answer: C. oxidation and polymerisation of unsaturates.
The most critical property of a jet fuel is its
- Cloud point
- Pour point
- Colour
- Freezing point
Show the answer
Answer: D. Freezing point
A good burning kerosene has a smoke point of about ____ mm.
- 0-5
- 20-25
- 60-65
- 100-120
Show the answer
Answer: B. 20-25
Which crude fraction has the highest API gravity?
- Diesel
- Gasoline
- Atmospheric gas oil
- Vacuum gas oil
Show the answer
Answer: B. Gasoline
Of these, the cetane number closest to that of truck diesel is
- 5
- 14
- 35
- 85
Show the answer
Answer: C. 35
The aniline point of diesel indicates its ____ content.
- aromatic
- paraffin
- olefin
- naphthene
Show the answer
Answer: A. aromatic
Hydrofining is a modern, effective process for
- removal of sulphur.
- improvement of smoke point.
- reduction of breathing loss.
- improvement of viscosity index.
Show the answer
Answer: A. removal of sulphur.
Compared with asphalt-base crude, paraffin-base crude gives a
- higher yield of straight run gasoline.
- higher octane number gasoline.
- lower viscosity index lube oil.
- poorer yield of lube oil.
Show the answer
Answer: A. higher yield of straight run gasoline.
Aniline point is specified mainly for
- diesel
- LPG
- naphtha
- gasoline
Show the answer
Answer: A. diesel
Kerosene is dearomatised to
- increase its smoke point.
- improve its oxidation stability.
- decrease the breathing loss.
- none of these.
Show the answer
Answer: A. increase its smoke point.
The best feed for platforming (platinum reforming) is
- Olefinic hydrocarbon
- Naphtha
- Fuel oil
- Atmospheric residue
Show the answer
Answer: B. Naphtha
The general formula of a mercaptan is
- R-COOH
- R-S-H
- R-S-R
- R-S-R'
Show the answer
Answer: B. R-S-H
Which additive raises the cetane number of diesel?
- Amyl nitrate
- Ethyl mercaptan
- Napthenic acid
- Tetra ethyl lead
Show the answer
Answer: A. Amyl nitrate
The general formula of naphthenes (cycloparaffins) is
- CₙH₂ₙ+₂
- CₙH₂ₙ-6 (where n ≥ 6)
- CₙH₂ₙ-4
- same as that for olefins i.e. CₙH₂ₙ
Show the answer
Answer: D. same as that for olefins i.e. CₙH₂ₙ
The flash point of petrol (below 50 °C) is found with the
- Abel apparatus.
- Pensky-Marten's apparatus.
- Saybolt chromometer.
- none of these.
Show the answer
Answer: A. Abel apparatus.
The flash point of diesel and kerosene (above 50 °C) is found with the
- Abel apparatus
- Pensky-Martens apparatus
- Saybolt chromometer
- none of these
Show the answer
Answer: B. Pensky-Martens apparatus
Which hydrocarbons are almost absent from crude oil?
- Olefins
- Mercaptans
- Naphthenes
- Cycloparaffins
Show the answer
Answer: A. Olefins
Which hydrocarbons are wanted in petrol but not in kerosene?
- Paraffins
- Aromatics
- Mercaptans
- Naphthenic acid
Show the answer
Answer: B. Aromatics
As the density of petroleum products rises, their viscosity
- increases
- decreases
- remains same
- either (a) or (b)
Show the answer
Answer: A. increases
Which petroleum product has the lowest flash point?
- Diesel
- Kerosene
- Petrol
- Furnace oil
Show the answer
Answer: C. Petrol
Which petroleum product has the highest flash point?
- Diesel
- Kerosene
- Petrol
- Furnace oil
Show the answer
Answer: D. Furnace oil
Domestic LPG consists mainly of
- propane and butane
- butane and ethane
- methane and ethane
- methane and carbon monoxide
Show the answer
Answer: A. propane and butane
Road-grade bitumen is made from vacuum residue by
- aeration
- pyrolysis
- hydrogenation
- steam reforming
Show the answer
Answer: A. aeration
Paraffin waxes are graded by their
- Specific gravity
- Melting point
- Viscosity
- Penetration number
Show the answer
Answer: B. Melting point
In atmospheric crude distillation, going from lighter to heavier cuts,
- sulphur increases
- sulphur decreases
- nitrogen decreases
- none of these
Show the answer
Answer: A. sulphur increases
Olefin metathesis is:
- Reforming
- Hydrocracking
- Exchange of substituents between two alkenes; used in polymer/fine chemical synthesis
- None
Show the answer
Answer: C. Exchange of substituents between two alkenes; used in polymer/fine chemical synthesis
Hydrocracking differs from FCC:
- No H₂ used
- Uses H₂ and catalyst to crack heavy oil with better product quality and less coke
- Higher temperature
- None
Show the answer
Answer: B. Uses H₂ and catalyst to crack heavy oil with better product quality and less coke
Alkylation (refinery) produces:
- Diesel
- Jet fuel
- High-octane alkylate gasoline by reacting isobutane with olefins
- LPG only
Show the answer
Answer: C. High-octane alkylate gasoline by reacting isobutane with olefins High-octane alkylate gasoline by reacting isobutane with olefins (HF or H₂SO₄ catalyst)
Isomerisation in refinery:
- Cracks heavy molecules
- None
- Reforms aromatics
- Converts straight-chain paraffins to branched
Show the answer
Answer: D. Converts straight-chain paraffins to branched Converts straight-chain paraffins to branched (higher octane)
Fluid Catalytic Cracking (FCC) regenerator burns off:
- None
- Coke deposited on catalyst to regenerate it
- Products
- Feedstock
Show the answer
Answer: B. Coke deposited on catalyst to regenerate it Coke deposited on catalyst to regenerate it (producing heat for reactor)
Hydrotreating (HDS) removes:
- None
- Nitrogen only
- Sulphur from petroleum fractions
- Metals only
Show the answer
Answer: C. Sulphur from petroleum fractions Sulphur from petroleum fractions (H₂ + catalyst → H₂S removed)
Platforming/Catalytic reforming catalyst:
- V₂O₅
- Pt or Pt-Re on acidic alumina support
- Ni
- Fe
Show the answer
Answer: B. Pt or Pt-Re on acidic alumina support
Steam reforming of methane (SMR):
- CH₄ cracking
- CH₄ + H₂O → CO + 3H₂ over Ni catalyst at 700-900°C
- None
- CH₄ + O₂ → CO₂ + H₂O
Show the answer
Answer: B. CH₄ + H₂O → CO + 3H₂ over Ni catalyst at 700-900°C
Partial oxidation of methane:
- CH₄ + ½O₂ → CO + 2H₂
- Full oxidation
- Steam reforming only
- None
Show the answer
Answer: A. CH₄ + ½O₂ → CO + 2H₂ CH₄ + ½O₂ → CO + 2H₂ (autothermal reforming uses combination)
VCM production from EDC:
- Oxidation
- None
- Hydrogenation
- Thermal cracking of EDC at 500°C
Show the answer
Answer: D. Thermal cracking of EDC at 500°C Thermal cracking (pyrolysis) of EDC at 500°C: CH₂ClCH₂Cl → CH₂=CHCl + HCl
Cumene is produced by:
- Hydrogenation of benzene
- None
- Benzene + propylene alkylation over zeolite or phosphoric acid catalyst
- Reforming
Show the answer
Answer: C. Benzene + propylene alkylation over zeolite or phosphoric acid catalyst
Aniline production:
- None
- Chlorination of benzene
- Reforming
- Nitration of benzene → nitrobenzene; then catalytic hydrogenation of nitrobenzene
Show the answer
Answer: D. Nitration of benzene → nitrobenzene; then catalytic hydrogenation of nitrobenzene
Acrolein produced by:
- Cracking
- None
- Reforming
- Selective oxidation of propylene over BiMo catalyst
Show the answer
Answer: D. Selective oxidation of propylene over BiMo catalyst
Dimethyl sulphoxide (DMSO) produced from:
- Oxidation of dimethyl sulphide
- None
- Reforming
- Sulphur + methane
Show the answer
Answer: A. Oxidation of dimethyl sulphide Oxidation of dimethyl sulphide (DMS)
Cyclohexane produced by:
- Catalytic hydrogenation of benzene over Ni or Raney Ni
- Cracking
- None
- Reforming
Show the answer
Answer: A. Catalytic hydrogenation of benzene over Ni or Raney Ni
Thermal cracking:
- Hydrocracking
- None
- Catalytic cracking
- Homolytic C-C bond cleavage at high T
Show the answer
Answer: D. Homolytic C-C bond cleavage at high T Homolytic C-C bond cleavage at high T (>500°C) - no catalyst
Visbreaking is:
- Mild thermal cracking of vacuum residue to reduce viscosity
- None
- Deep cracking
- Hydrotreating
Show the answer
Answer: A. Mild thermal cracking of vacuum residue to reduce viscosity
Delayed coking:
- Hydrotreating
- Fluid coking only
- Thermal cracking of residue to produce petroleum coke, gas, and distillates
- None
Show the answer
Answer: C. Thermal cracking of residue to produce petroleum coke, gas, and distillates
Toluene disproportionation (TDP):
- Toluene cracking
- Toluene + H₂ → benzene
- None
- 2 toluene → benzene + p-xylene/xylene mixture over ZSM-5
Show the answer
Answer: D. 2 toluene → benzene + p-xylene/xylene mixture over ZSM-5
Naphtha reformer recycle gas:
- Inert gas
- H₂-rich gas recycled to maintain pressure and reduce coking on catalyst
- Steam
- None
Show the answer
Answer: B. H₂-rich gas recycled to maintain pressure and reduce coking on catalyst
Sulphuric acid alkylation uses:
- None
- H₂SO₄ at 5-15°C for isobutane + C4 olefins → alkylate
- Both equally
- HF at room T
Show the answer
Answer: B. H₂SO₄ at 5-15°C for isobutane + C4 olefins → alkylate
HF alkylation uses:
- None
- Anhydrous HF at 20-40°C; same chemistry as H₂SO₄ alkylation
- H₂SO₄
- Zeolite
Show the answer
Answer: B. Anhydrous HF at 20-40°C; same chemistry as H₂SO₄ alkylation
Reformate from catalytic reformer high in:
- Olefins
- None
- Benzene, toluene, xylene and branched paraffins
- Straight paraffins
Show the answer
Answer: C. Benzene, toluene, xylene and branched paraffins Benzene, toluene, xylene (BTX) and branched paraffins
Natural gas liquids (NGL):
- Only methane
- Crude oil
- None
- Ethane, propane, butane, pentane extracted from natural gas
Show the answer
Answer: D. Ethane, propane, butane, pentane extracted from natural gas
Refinery gas (off-gas) consists of:
- Only H₂
- Heavy fuel oil
- None
- Hydrogen, methane, ethane, propane, propylene
Show the answer
Answer: D. Hydrogen, methane, ethane, propane, propylene Hydrogen, methane, ethane, propane, propylene (C1-C4)
Hydroformylation (Oxo process):
- Olefin + CO + H₂ → aldehyde using Rh or Co catalyst
- Reforming
- Cracking
- None
Show the answer
Answer: A. Olefin + CO + H₂ → aldehyde using Rh or Co catalyst Olefin + CO + H₂ → aldehyde (then → alcohol) using Rh or Co catalyst
Alkylation of naphthalene:
- Reforming
- Friedel-Crafts or zeolite-catalysed
- Cracking
- None
Show the answer
Answer: B. Friedel-Crafts or zeolite-catalysed Friedel-Crafts or zeolite-catalysed - used to make detergent alkylate
Transesterification for biodiesel:
- Saponification
- None
- Esterification
- Triglyceride + MeOH → FAME + glycerol with NaOH catalyst
Show the answer
Answer: D. Triglyceride + MeOH → FAME + glycerol with NaOH catalyst Triglyceride + MeOH → FAME (fatty acid methyl ester) + glycerol with NaOH catalyst
Hydrogenation of vegetable oils:
- None
- Cracking
- Partial hydrogenation → margarine; full → saturated fat; uses Ni catalyst
- Reforming
Show the answer
Answer: C. Partial hydrogenation → margarine; full → saturated fat; uses Ni catalyst
Interesterification of fats:
- Hydrogenation
- Rearranges fatty acids on glycerol without hydrogenation
- Cracking
- None
Show the answer
Answer: B. Rearranges fatty acids on glycerol without hydrogenation Rearranges fatty acids on glycerol without hydrogenation - avoids trans fats
The practice questions were written for this studio; they are not copied from ASTU papers. ASTU publishes no topic syllabus for these exams, so the topics are an informed guide based on diploma courses, not an official list.