Fuels, combustion, furnaces and refractories
Topics: Classification of fuels, calorific value; coal, its rank, proximate and ultimate analysis, pulverisation; liquid fuels and their characteristics (viscosity, API gravity, flash and fire point, cetane and octane numbers, pour and cloud point, knocking, diesel index, smoke point); gaseous fuels; furnaces; refractories.
Fuels and calorific value
Fuels are solid (coal, wood), liquid (petroleum products) or gaseous (natural gas, LPG, producer gas). Gross (higher) calorific value includes the latent heat of the water formed; net (lower) value subtracts it. Dulong’s formula estimates GCV from the ultimate analysis: GCV ≈ 33 800C + 144 000(H − O/8) + 9270S kJ/kg (mass fractions).
NCV = GCV − (9H × 2442) kJ/kg, since each kg of hydrogen forms 9 kg of water.
- GCV includes latent heat of water
- NCV = GCV − 9H × 2442 kJ/kg
- Coal rank: peat → anthracite
Example: A coal has C 80 %, H 5 %, O 8 %, S 1 %. Estimate GCV and NCV by Dulong.
- GCV = 33 800 × 0.80 + 144 000(0.05 − 0.01) + 9270 × 0.01 ≈ 32 890 kJ/kg.
- NCV = 32 890 − 9 × 0.05 × 2442 ≈ 31 790 kJ/kg.
Answer: GCV ≈ 32.9, NCV ≈ 31.8 MJ/kg
Coal analysis and liquid-fuel properties
Proximate analysis gives moisture, volatile matter, ash and fixed carbon (by difference); ultimate analysis gives C, H, N, S and O. Higher rank coal has more fixed carbon and less volatile matter.
Liquid fuels: flash point (vapour ignites momentarily) is lower than fire point (keeps burning); pour and cloud points tell low-temperature behaviour; octane number for petrol, cetane number and diesel index for diesel; API gravity and viscosity for handling.
- Fixed carbon = 100 − (M + VM + ash)
- Flash point < fire point
- Higher rank: more fixed carbon
Example: A coal has 5 % moisture, 30 % volatile matter and 15 % ash. Find the fixed carbon.
- Fixed carbon = 100 − (5 + 30 + 15).
- = 50 %.
Answer: 50 %
Example: Which is higher for an oil: the flash point or the fire point?
- At the flash point the vapour only flashes; more vapour is needed to sustain a flame.
- The fire point is higher (usually by about 5–10 °C).
Answer: Fire point
Combustion, furnaces and refractories
C + O₂ → CO₂: each kg of carbon needs 32/12 = 2.67 kg of O₂; air is 23.2 % O₂ by mass, so about 11.5 kg of air. Excess air ensures complete combustion but carries heat away. Furnaces are batch or continuous, heated by fuel or electricity.
Refractories withstand high temperature: acidic (silica, fireclay), basic (magnesite, dolomite) and neutral (alumina, chromite, carbon). Choose a refractory that will not react with the slag: acidic linings for acidic slags, basic for basic.
- Air for 1 kg C ≈ 11.5 kg (theoretical)
- Excess air: complete burning, more stack loss
- Acidic, basic and neutral refractories
Example: Find the theoretical air to burn 1 kg of carbon, and with 20 % excess.
- O₂ = 32/12 = 2.67 kg; air = 2.67/0.232 ≈ 11.5 kg.
- With 20 % excess: 11.5 × 1.2 ≈ 13.8 kg.
Answer: 11.5 kg; 13.8 kg
Example: A steel furnace has a basic slag rich in lime. Should its lining be silica or magnesite?
- Silica is acidic and would react with a basic slag and wear away.
- Use a basic refractory such as magnesite.
Answer: Magnesite (basic)
Coal ranks in rising carbon content from peat through lignite and bituminous coal to anthracite. Proximate analysis reports moisture, volatile matter, ash and fixed carbon; ultimate analysis reports C, H, N, S and O. Calorific value is measured in a bomb calorimeter for solids and liquids and a Junkers calorimeter for gases. Dulong’s formula estimates it from ultimate analysis. Producer gas (CO + N₂) comes from air over hot coke; water gas (CO + H₂) from steam over hot coke. Refractories withstand high temperature and are classed as acidic (silica, fireclay), basic (magnesite, dolomite) and neutral (chromite, graphite). Refractoriness is rated by the pyrometric cone equivalent (Seger cone).
- Flash point: vapours ignite momentarily; fire point: burning continues; fire point is higher.
- Pour point: lowest temperature at which oil flows; cloud point: wax begins to separate.
- Anti-knock additives raise octane number.
- Spalling: cracking of a refractory due to thermal stress.
- Excess air is needed for complete combustion, but too much carries away heat.
Key formulas
- HCV = [8080C + 34500(H − O/8) + 2240S]/100 kcal/kg
- LCV = HCV − 0.09H × 587 kcal/kg
- °API = 141.5/SG − 131.5
Practice questions
The coal of highest rank is
- peat
- lignite
- bituminous
- anthracite
Show the answer
Answer: D. anthracite Highest carbon.
Proximate analysis does NOT report
- moisture
- ash
- fixed carbon
- sulphur
Show the answer
Answer: D. sulphur Sulphur is in ultimate analysis.
The calorific value of coal is measured with a
- Junkers calorimeter
- bomb calorimeter
- Orsat apparatus
- Seger cone
Show the answer
Answer: B. bomb calorimeter Junkers is for gases.
Flue gas composition is found with the
- Orsat apparatus
- bomb calorimeter
- pycnometer
- Redwood viscometer
Show the answer
Answer: A. Orsat apparatus Absorption in reagents.
Water gas consists mainly of
- CO and H₂
- CO and N₂
- CH₄ and C₂H₆
- CO₂ and N₂
Show the answer
Answer: A. CO and H₂ Steam over hot coke.
Producer gas contains a large proportion of
- N₂
- H₂
- CH₄
- O₂
Show the answer
Answer: A. N₂ Made with air.
Silica brick is
- acidic
- basic
- neutral
- organic
Show the answer
Answer: A. acidic Acidic refractory.
Magnesite is a
- basic refractory
- acid refractory
- neutral refractory
- fuel
Show the answer
Answer: A. basic refractory MgO.
Refractoriness is expressed by
- pyrometric cone equivalent
- API gravity
- octane number
- flash point
Show the answer
Answer: A. pyrometric cone equivalent Seger cones.
Fire point compared with flash point is
- lower
- higher
- the same
- unrelated
Show the answer
Answer: B. higher Sustained burning needs more vapour.
Cracking of a refractory due to thermal stress is
- spalling
- sintering
- calcining
- slagging
Show the answer
Answer: A. spalling Spalling.
A higher diesel index means
- better ignition quality
- more knocking in petrol
- more ash
- lower viscosity only
Show the answer
Answer: A. better ignition quality Related to cetane number.
In Orsat flue-gas analysis, carbon monoxide is absorbed by
- cuprous chloride
- potassium hydroxide
- alkaline pyrogallol solution
- none of these.
Show the answer
Answer: A. cuprous chloride
A bomb calorimeter gives the
- higher calorific value at constant volume.
- gross calorific value at constant pressure.
- lower calorific value at constant pressure.
- net calorific value at constant volume.
Show the answer
Answer: A. higher calorific value at constant volume.
Incomplete combustion shows up as a high level of ____ in the flue gas.
- smoke
- temperature
- oxygen
- carbon monoxide
Show the answer
Answer: D. carbon monoxide
By weight, air contains about ____ % oxygen.
- 19
- 21
- 23
- 29
Show the answer
Answer: C. 23
With storage time, the calorific value of coal
- decreases
- increases
- remains unaltered
- may increase or decrease (depends on the method of storage).
Show the answer
Answer: A. decreases
Firing pulverised coal in a boiler furnace gives
- high calorific value.
- better combustion.
- smokeless burning.
- less erosion on furnace walls
Show the answer
Answer: B. better combustion.
Which coal is best burnt on a chain-grate stoker?
- Non-caking coal
- Caking coal
- Coking coal
- Pulverised coal.
Show the answer
Answer: A. Non-caking coal
Over-fire burning in a furnace means
- supply of excess fuel.
- supply of excess air.
- burning of carbon monoxide and other incombustibles in upper zone of furnace by supplying more air.
- none of these.
Show the answer
Answer: C. burning of carbon monoxide and other incombustibles in upper zone of furnace by supplying more air.
Passing steam over hot coal (C + H₂O → CO + H₂, endothermic) is called
- carbonisation
- oxidation
- coalification
- gasification
Show the answer
Answer: D. gasification
The Fischer–Tropsch process is used for
- gasification of coal.
- synthesis of gasoline (from water gas).
- hydrogenation of coal to produce gasoline.
- none of these.
Show the answer
Answer: B. synthesis of gasoline (from water gas).
In a pulverised-coal-fired boiler, secondary air is mainly used for
- transportation of coal.
- drying of coal.
- combustion of coal by supplying it around the burner.
- preheating the primary air.
Show the answer
Answer: C. combustion of coal by supplying it around the burner.
In a pulverised-coal burner, primary air mainly serves to
- burn CO to CO₂.
- dry and transport the coal.
- have proper combustion by supplying it around the burner.
- preheat the tertiary air used for complete combustion of CO to CO₂.
Show the answer
Answer: B. dry and transport the coal.
Firing coal in pulverised form
- permits the use of high ash content coal,
- permits the use of low fusion point ash coal.
- accelerates the burning rate and economises on fuel combustion.
- all (a), (b) and (c).
Show the answer
Answer: D. all (a), (b) and (c).
The Orsat apparatus is used for
- gravimetric analysis of flue gas.
- finding out combustion efficiency.
- direct determination of nitrogen in flue gas.
- none of these.
Show the answer
Answer: B. finding out combustion efficiency.
Which statement about flame temperature is wrong?
- Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat.
- Burning the fuel with theoretically required amount of pure oxygen results in attainment of maximum adiabatic flame temperature.
- Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature.
- Adiabatic flame temperatures of actual combustions are always less than the maximum values.
Show the answer
Answer: C. Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature.
Compared with burning in pure oxygen, the maximum adiabatic flame temperature in air is
- much lower.
- much higher.
- same.
- either lower or higher, depends on the type of fuel.
Show the answer
Answer: A. much lower.
Preheating the fuel, the air, or both makes the flame temperature
- the gaseous fuel before combustion decreases
- combustion air decreases
- either the fuel or the air or both, increases
- either the fuel or the air does not affect
Show the answer
Answer: C. either the fuel or the air or both, increases
A fuel of only carbon and carbon monoxide (no hydrogen) burns in oxygen at constant pressure. Its gross calorific value compared with its net calorific value is
- more
- less
- same
- data insufficient; can't be predicted.
Show the answer
Answer: C. same
As the calorific value of a fuel rises, its adiabatic flame temperature
- increase
- decrease
- remain unchanged
- may increase or decrease; depends on the quantity of products of combustion
Show the answer
Answer: D. may increase or decrease; depends on the quantity of products of combustion
A coal with a grindability index of 100 can be
- coal can be pulverised with great difficulty.
- coal can't be pulverised.
- coal can be easily pulverised.
- power consumption in grinding the coal will be very high.
Show the answer
Answer: C. coal can be easily pulverised.
Dry wood has a calorific value of roughly ____ kcal/kg.
- 5
- 50
- 500
- 5000
Show the answer
Answer: D. 5000
A coal rich in volatile matter has a
- low ignition temperature
- very little ash content
- high fusion point of its ash
- low adiabatic flame temperature
Show the answer
Answer: A. low ignition temperature
Steam is admitted now and then into the fuel bed of a gas producer to
- convert CO to CO₂.
- increase the combustion rate.
- increase the gas production rate.
- minimise the chances of clinker formation.
Show the answer
Answer: D. minimise the chances of clinker formation.
Which gas is called “blue gas”?
- coke oven gas
- water gas
- natural gas
- producer gas
Show the answer
Answer: B. water gas
Using too much excess combustion air causes
- heat losses.
- long flame.
- condensation of water vapour from the fuel gas.
- none of these.
Show the answer
Answer: A. heat losses.
Preheating a gaseous fuel increases the
- flame length
- flame temperature
- quantity of flue gas
- ignition temperature
Show the answer
Answer: B. flame temperature
High-temperature carbonisation of one tonne of dry coal gives roughly ____ Nm³ of coke-oven gas.
- 30
- 300
- 3000
- 30,000
Show the answer
Answer: B. 300
Coke-oven gas is a better fuel than blast-furnace gas because of its
- calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity).
- adiabatic flame temperature.
- heat release rate (thus requiring smaller combustion chamber).
- all (a), (b) and (c).
Show the answer
Answer: D. all (a), (b) and (c).
Which fuel constituent does NOT add to the calorific value?
- Hydrogen
- Sulphur
- Carbon
- None of these
Show the answer
Answer: D. None of these
Compared with lump coal, pulverised coal
- develops a non-luminous flame.
- develops a low temperature flame.
- can be done with less excess air.
- provides a lower rate of heat release.
Show the answer
Answer: C. can be done with less excess air.
Pulverised coal for boiler firing does NOT need to have
- less moisture content
- high fusion point of its ash
- high bulk density
- lower ash content
Show the answer
Answer: B. high fusion point of its ash
Burning 1 kg of carbon completely needs roughly ____ kg of dry air.
- 11
- 2
- 20
- 38
Show the answer
Answer: A. 11
Burning 1 Nm³ of CO to CO₂ needs roughly ____ Nm³ of dry air.
- 2.4
- 1.75
- 0.87
- 11.4
Show the answer
Answer: A. 2.4
Washing coal
- reduces its sulphur and ash content.
- controls its ash fusibility and increases its calorific value.
- improves its coking properties.
- all (a), (b) and (c).
Show the answer
Answer: D. all (a), (b) and (c).
Which of these gases has the highest gross calorific value?
- Blast furnace gas
- Coke oven gas
- Carburetted water gas
- Oil refinery gas
Show the answer
Answer: D. Oil refinery gas
Most coking coals are
- anthracite
- bituminous
- liguite
- none of these
Show the answer
Answer: B. bituminous
Large excess air in combustion leads to
- increased fuel consumption
- incomplete combustion
- smoky flame
- none of these
Show the answer
Answer: A. increased fuel consumption
The ratio of atomising steam to fuel oil in a burner is about
- 0.5
- 1.5
- 2.5
- 3.5
Show the answer
Answer: A. 0.5
Each 10 % rise in excess air increases fuel consumption by roughly ____ %.
- 0.1
- 2
- 5
- 10
Show the answer
Answer: B. 2
Coke made from a coking coal containing 20 % ash will contain roughly ____ % ash.
- 6
- 12
- 18
- 24
Show the answer
Answer: D. 24
Spontaneous combustion of stored coal is caused by
- inadequate ventilation.
- low temperature oxidation.
- storage in large heaps with small surface to volume ratio.
- all (a), (b) and (c).
Show the answer
Answer: D. all (a), (b) and (c).
Anthracite burns efficiently when it is
- low preheat of air.
- fine grinding.
- high excess air.
- all (a), (b) and (c).
Show the answer
Answer: B. fine grinding.
The fusion point of coal ash rises with more
- iron sulphate
- iron silicate
- lime and magnesia
- all (a), (b) and (c)
Show the answer
Answer: C. lime and magnesia
Air whose oxygen has fallen below about ____ % (diluted by nitrogen) will not support combustion and is unsafe to breathe.
- 18
- 16
- 14
- 12
Show the answer
Answer: B. 16
Sulphur in a furnace fuel
- contributes to its heating value.
- helps in electrostatic precipitation of ash from flue gases.
- corrodes ducts & air preheater, if the flue gas temperature is low.
- all a, b & c.
Show the answer
Answer: D. all a, b & c.
Steel is normally gas-welded with a ____ flame.
- carburising
- neutral
- oxidising
- all (a), (b) & (c)
Show the answer
Answer: B. neutral
The sun’s energy comes mainly from nuclear
- fusion
- fission
- combustion
- phosphorous
Show the answer
Answer: A. fusion
The minimum spacing between two liquid fuel storage tanks of height H is commonly taken as
- H
- H/2
- H/4
- H/6
Show the answer
Answer: C. H/4
The underground chamber of a biogas plant is the
- septic tank
- oxidation well
- digestor
- lagoon
Show the answer
Answer: C. digestor
A flue gas analysis of CO₂ 12 %, O₂ 8 %, CO nil, N₂ 80 % shows that
- pure oxygen has been used for combustion.
- nitrogen percentage in the fuel is very high.
- excess air has been used for combustion.
- hydrogen is not present in the fuel.
Show the answer
Answer: C. excess air has been used for combustion.
The practice questions were written for this studio; they are not copied from ASTU papers. ASTU publishes no topic syllabus for these exams, so the topics are an informed guide based on diploma courses, not an official list.