IITIAN1997 STUDIO

Structural mechanics

JLEE CE · 12 practice questions with answers

Practise and take a mock test →

Stresses, beams, columns and trusses

Topics: Stress and strain, Hooke’s law, Poisson’s ratio, elastic constants, composite sections, temperature stresses; shear force and bending moment diagrams for simply supported, cantilever and overhanging beams; theory of simple bending, section modulus, flitched beams; slope and deflection; columns and struts (Euler, Rankine); analysis of perfect frames; dams and retaining walls.

Stress, strain and elastic constants

Stress σ = P/A and strain ε = δL/L; within the elastic limit Hooke’s law gives σ = Eε, so the elongation of a bar is δL = PL/(AE). Poisson’s ratio μ = lateral strain/longitudinal strain (about 0.3 for steel). The elastic constants are linked: E = 2G(1 + μ) = 3K(1 − 2μ).

A bar prevented from expanding when heated develops a temperature stress σ = EαΔT. In a composite section (steel and concrete together) both materials share the same strain, so the stiffer one carries more stress.

  • δL = PL/(AE)
  • E = 2G(1 + μ) = 3K(1 − 2μ)
  • Temperature stress σ = EαΔT

Example: A 20 mm steel rod 2 m long carries 50 kN. Find the stress and elongation (E = 200 GPa).

  1. A = π × 10² ≈ 314.2 mm²; σ = 50 000/314.2 ≈ 159.2 MPa.
  2. δL = σL/E = 159.2 × 2000/200 000 ≈ 1.59 mm.

Answer: 159 MPa; 1.59 mm

Example: E = 200 GPa and μ = 0.3. Find G.

  1. G = E/[2(1 + μ)] = 200/2.6.
  2. ≈ 76.9 GPa.

Answer: ≈ 77 GPa

Example: A steel rail is fixed at both ends and warms by 40 °C (α = 12 × 10⁻⁶/°C). Find the stress.

  1. σ = EαΔT = 200 000 × 12 × 10⁻⁶ × 40.
  2. = 96 MPa (compressive).

Answer: 96 MPa

Shear force and bending moment

Shear force at a section is the sum of forces on one side; bending moment is the sum of their moments. The bending moment is greatest where the shear force changes sign (passes through zero).

Standard results: simply supported span with UDL w: reactions wL/2, M_max = wL²/8 at mid-span; central point load W: M_max = WL/4; cantilever with end load W: M_max = WL at the fixed end; cantilever with UDL: wL²/2.

  • M_max where SF = 0
  • SS + UDL: wL²/8; SS + central W: WL/4
  • Cantilever end load: WL; UDL: wL²/2

Example: A simply supported beam of 6 m carries 10 kN/m. Find the reactions and the maximum bending moment.

  1. Each reaction = wL/2 = 30 kN.
  2. M_max = wL²/8 = 10 × 36/8 = 45 kN·m.

Answer: 30 kN each; 45 kN·m

Example: A 6 m simply supported beam carries 20 kN at mid-span. Find M_max.

  1. M_max = WL/4.
  2. = 20 × 6/4 = 30 kN·m.

Answer: 30 kN·m

Bending stress, deflection and columns

Theory of simple bending: M/I = σ/y = E/R, so σ_max = M/Z with section modulus Z = I/y_max; for a rectangle Z = bd²/6. Deflection of a simply supported beam with UDL is 5wL⁴/(384EI); with a central load WL³/(48EI).

Long columns fail by buckling. Euler’s load P = π²EI/Lₑ², where the effective length Lₑ = L (both ends hinged), 2L (one fixed, one free), L/2 (both fixed), L/√2 (one fixed, one hinged).

  • σ = M/Z; rectangle Z = bd²/6
  • δ = 5wL⁴/384EI (SS, UDL)
  • Euler P = π²EI/Lₑ²

Example: A 200 × 400 mm beam carries M = 45 kN·m. Find the maximum bending stress.

  1. Z = 200 × 400²/6 ≈ 5.33 × 10⁶ mm³.
  2. σ = 45 × 10⁶/5.33 × 10⁶ ≈ 8.44 MPa.

Answer: ≈ 8.4 MPa

Example: A column is fixed at one end and free at the other. What effective length is used in Euler’s formula?

  1. The free end can sway sideways like half of a pin-ended column.
  2. Lₑ = 2L, so the load is a quarter of the pinned value.

Answer: 2L

Within the elastic limit stress is proportional to strain (σ = Eε), so a bar extends by δ = PL/AE. The elastic constants are linked by E = 2G(1 + μ) = 3K(1 − 2μ). A temperature rise that is prevented causes stress αΔT·E. Shear force is the sum of forces on one side of a section and bending moment the sum of their moments; dM/dx = V, so the moment is greatest where the shear force changes sign, and it changes sign at a point of contraflexure. Simple bending gives M/I = f/y = E/R, and the section modulus Z = I/y_max measures strength in bending. A long column fails by buckling at Euler’s load π²EI/Le². A truss is a perfect frame when m = 2j − 3.

  • Max BM: simply supported with central load WL/4; with UDL wL²/8; cantilever with end load WL; with UDL wL²/2.
  • Max deflection: simply supported central load WL³/48EI; UDL 5wL⁴/384EI; cantilever end load WL³/3EI; UDL wL⁴/8EI.
  • Z: rectangle bd²/6; circle πd³/32.
  • Effective length: both ends hinged L; fixed–fixed L/2; fixed–hinged L/√2; fixed–free 2L.
  • No tension at a dam or wall base when the resultant lies within the middle third (e ≤ b/6).

Key formulas

  • δ = PL/AE
  • E = 2G(1 + μ) = 3K(1 − 2μ)
  • M/I = f/y = E/R
  • P_E = π²EI/Le²
  • m = 2j − 3
  • σ_t = αΔT·E

Practice questions

Hooke’s law holds up to the

  1. yield point
  2. limit of proportionality
  3. ultimate stress
  4. breaking point
Show the answer

Answer: B. limit of proportionality Stress ∝ strain only up to this limit.

The relation between E, G and μ is

  1. E = 2G(1 + μ)
  2. E = 3G(1 − 2μ)
  3. E = G(1 + 2μ)
  4. G = 2E(1 + μ)
Show the answer

Answer: A. E = 2G(1 + μ) Standard relation.

Bending moment is maximum where shear force

  1. is maximum
  2. changes sign
  3. is constant
  4. equals the load
Show the answer

Answer: B. changes sign dM/dx = V = 0.

A point of contraflexure is where bending moment

  1. is maximum
  2. changes sign
  3. is constant
  4. equals shear
Show the answer

Answer: B. changes sign BM passes through zero.

Max BM of a simply supported beam with UDL w over span L is

  1. wL²/4
  2. wL²/8
  3. wL²/2
  4. wL²/12
Show the answer

Answer: B. wL²/8 At midspan.

SFD for a simply supported beam under UDL is

  1. constant
  2. linear
  3. parabolic
  4. cubic
Show the answer

Answer: B. linear Shear varies linearly; BM is parabolic.

The section modulus of a rectangle is

  1. bd²/6
  2. bd³/12
  3. bd²/12
  4. b²d/6
Show the answer

Answer: A. bd²/6 I/(d/2).

At the neutral axis the bending stress is

  1. maximum
  2. zero
  3. equal to shear stress
  4. average
Show the answer

Answer: B. zero f = My/I with y = 0.

The effective length of a column with both ends fixed is

  1. L
  2. L/2
  3. 2L
  4. L/√2
Show the answer

Answer: B. L/2 Standard.

Euler’s formula applies to

  1. short columns
  2. long columns
  3. all beams
  4. ties
Show the answer

Answer: B. long columns Buckling failure.

A perfect frame with 5 joints has how many members?

  1. 5
  2. 6
  3. 7
  4. 8
Show the answer

Answer: C. 7 m = 2(5) − 3.

To avoid tension at the base of a dam the resultant must lie in the

  1. middle half
  2. middle third
  3. outer third
  4. heel
Show the answer

Answer: B. middle third e ≤ b/6.

The practice questions were written for this studio; they are not copied from ASTU papers. ASTU publishes no topic syllabus for these exams, so the topics are an informed guide based on diploma courses, not an official list.

Practise and take a mock test →