Permanent way, bridges and tunnels
Topics: Overview of transportation; gauges, rails, sleepers, ballast and fastenings; points and crossings; signalling; bridge components, classification and scour; tunnel shapes and construction.
Gauges and the permanent way
Indian gauges: broad 1676 mm, metre 1000 mm, narrow 762 mm and 610 mm; Project Unigauge is converting most lines to broad gauge. The track structure (permanent way) is rails on sleepers on ballast on formation. Sleeper density is written M + x, where M is the rail length in metres.
Rails are flat-footed; coning of wheels (1 in 20) keeps vehicles centred; creep is the longitudinal movement of rails.
- BG 1676, MG 1000, NG 762/610 mm
- Sleeper density M + x
- Coning 1 in 20
Example: A BG track uses 13 m rails with sleeper density M + 7. How many sleepers per rail length?
- M = 13.
- 13 + 7 = 20 sleepers.
Answer: 20
Example: What is the broad-gauge width in India?
- Standard Indian broad gauge.
- 1676 mm (5 ft 6 in).
Answer: 1676 mm
Points, crossings and signalling
Points (switches) and crossings let trains change track. A crossing number N means a spread of 1 in N; the crossing angle θ = cot⁻¹ N. Signalling and interlocking ensure that conflicting routes cannot be set at the same time.
- Crossing 1 in N: θ = cot⁻¹ N
- Interlocking prevents conflicts
- Larger N, flatter turnout, higher speed
Example: Find the angle of a 1 in 12 crossing.
- θ = cot⁻¹ 12 = tan⁻¹(1/12).
- ≈ 4.76°.
Answer: ≈ 4.8°
Bridges and tunnels
Bridges are classified by material, span, structure (beam, arch, truss, suspension, cable-stayed) and use. Scour around piers must be estimated: Lacey’s normal scour depth d = 0.473(Q/f)^(1/3) and regime waterway P = 4.8√Q. Tunnels (circular, horseshoe, egg-shaped) are driven by drill-and-blast, tunnel boring machines or cut-and-cover.
- Lacey scour d = 0.473(Q/f)^(1/3)
- Regime waterway P = 4.8√Q
- Tunnel shapes: circular, horseshoe
Example: Find Lacey’s scour depth and regime waterway for Q = 1000 m³/s and f = 1.
- d = 0.473 × 1000^(1/3) = 0.473 × 10 ≈ 4.73 m.
- P = 4.8 × √1000 ≈ 152 m.
Answer: 4.73 m; ≈ 152 m
Example: Which tunnel shape suits soft ground with pressure from all sides?
- A circle resists uniform pressure best.
- Circular.
Answer: Circular
The Indian broad gauge is 1676 mm, metre gauge 1000 mm and narrow gauge 762 mm or 610 mm. The permanent way consists of rails on sleepers on ballast over formation. Flat-footed rails are standard. Wheels are coned at 1 in 20 and rails are tilted to match, which helps vehicles stay centred. Points and crossings allow trains to change track. A bridge comprises a superstructure and a substructure (piers, abutments, foundations); culverts have spans up to 6 m. Tunnels are driven by drilling and blasting, by tunnel boring machines in rock, or by shield methods in soft ground.
- Sleeper density is written as M + x, with M the rail length in metres.
- Ballast: broken stone transfers load and drains.
- Creep: longitudinal movement of rails.
- Scour depth governs foundation depth of piers.
- Lacey’s scour formula D = 0.473(Q/f)^(1/3) is commonly used.
Key formulas
- BG = 1676 mm
- Sleeper density = M + x
- Coning = 1 in 20
Practice questions
Broad gauge in India is
- 1676 mm
- 1435 mm
- 1000 mm
- 762 mm
Show the answer
Answer: A. 1676 mm 5 ft 6 in.
Metre gauge is
- 1676 mm
- 1000 mm
- 762 mm
- 610 mm
Show the answer
Answer: B. 1000 mm One metre.
Wheel coning is usually
- 1 in 20
- 1 in 100
- 1 in 5
- 1 in 2
Show the answer
Answer: A. 1 in 20 Slope of the tread.
Ballast is provided to
- transfer load and drain the track
- hold the signals
- join rails
- prevent wheel wear only
Show the answer
Answer: A. transfer load and drain the track Load spreading and drainage.
Longitudinal movement of rails is
- creep
- coning
- scour
- camber
Show the answer
Answer: A. creep Creep.
A culvert has a span up to about
- 6 m
- 30 m
- 60 m
- 100 m
Show the answer
Answer: A. 6 m Small bridge.
End supports of a bridge are
- abutments
- piers
- bearings
- girders
Show the answer
Answer: A. abutments Piers are intermediate.
Foundation depth of a bridge pier depends mainly on
- scour depth
- deck colour
- train speed
- rail section
Show the answer
Answer: A. scour depth Must go below scour.
The common Indian rail section is
- flat-footed
- bull-headed
- double-headed
- round
Show the answer
Answer: A. flat-footed Flat-footed.
Points and crossings allow trains to
- change tracks
- stop
- cool brakes
- pick up water
Show the answer
Answer: A. change tracks Turnouts.
Tunnels in rock are often driven by
- drilling and blasting
- hand trowelling
- pile driving
- dredging
Show the answer
Answer: A. drilling and blasting Or TBM.
An intermediate support of a bridge is a
- pier
- abutment
- wing wall
- approach
Show the answer
Answer: A. pier Pier.
The practice questions were written for this studio; they are not copied from ASTU papers. ASTU publishes no topic syllabus for these exams, so the topics are an informed guide based on diploma courses, not an official list.